Bbk codes for gal lm universal remote control. How to set up a universal remote control for your TV? Instructions

Home / Browsers

Recently I encountered a banal problem - the LCD Samsung TV LE-32S81B remote control died. More precisely, he didn’t die, some buttons just stopped working, as luck would have it, the most used ones are channel switching and volume. Disassembling the remote control and wiping its insides with alcohol gave some effect, but it was temporary - after 3 days, you had to press the button as hard as you could to change channels. Tired of it!

Puzzled by the purchase of a new remote control, I conducted a raid on online stores and realized that I couldn’t buy an original remote control for less than 800 rubles. I went to the M-Video store, they offered me a non-original remote control for 900 rubles, for which they were sent along the fence to read the inscriptions, and during a visit to Auchan they purchased a “good cheap” GAL LM-P003 remote control for 350 rubles and 2 AAA batteries for him.

The most interesting thing was ahead - setting up the GAL remote control to work correctly with a Samsung TV.

Comes with remote control detailed instructions How to do this, it contains several methods - manual, automatic and semi-automatic. There is a separate piece of paper containing a list of codes for different types equipment - a sheet almost the size of a TV, and filled on both sides - no less than 1000 codes! Fortunately, there is a grouping of codes by device type (TV, Audio, Video, DVD, etc.) and by manufacturer.

Automatic method is that the remote control goes through all the codes from this table and gives a command to turn off (by default the TV should be turned on). If the TV turns off, then the code has been selected and you need to press the OK button within 2 seconds. I first launched this method of selecting a code, but quickly realized that I could sit from morning until evening while it sorted through all the codes. Moreover, you cannot leave the TV in time to press the OK button. I don’t know who to recommend this method to - except maybe housewives or retirees who have a lot of free time :)

Manual method faster and more practical. In the section with codes, we look for the type of equipment and its manufacturer, in my case - TV / Samsung. There will be about 40 four-digit codes in this section. We proceed as follows, here are step-by-step instructions:

1. Press the TV button on the remote control and hold it for 3 seconds, the indicator on the remote control lights up.

2. After this, enter the code using numbers, for example, 0064. The indicator goes out, the code is accepted.

3. To check, press the channel switch button. If the TV does not react at all, go back to step 1 and enter the following code. And so on until the TV responds to commands from the remote control.

I was able to enter a working code after about the 20th attempt, the remote control controlled the TV, but incorrectly - the channels were switched, the volume was adjusted, but the setup menu did not work - instead of going through the items (with the joystick), the channels were switched. I continued my search and found at least 5 more working combinations. The optimal code for the Samsung LE-32S81B TV was 0565. All functions work - menu and teletext (although I don’t use it) and other rarely used settings.

Let's summarize. The GAL-P003 remote control turned out to be quite functional and an inexpensive substitute for the original remote control. remote control. I had to tinker with reading the instructions and setting up the remote control for about 15 minutes. The remote control range is at least 5 meters (on fresh batteries).

In terms of tactile sensations, the GAL-P003 remote control is, of course, not ideal - it feels cheap in everything. The body is made of inexpensive and lightweight plastic, painted silver. There are small nicks along the junction of the top and bottom panels. The volume and channel switching buttons do not have the most convenient shape; they are pressed tightly, and a click is felt at the end of the button. The remaining buttons are convex and easier to press. The labels on the main buttons are easy to read, but I think they will wear off over time with heavy use. If you value expensive and high-quality things and accessories, this remote control is not for you. But if you just want a remote that works, the GAL-P003 is a perfectly practical choice.

Transcript

1 GENERAL ACCESORY LINE INSTRUCTIONS FOR SETTING UP UNIVERSAL REMOTE CONTROLS Models LM-RC13L, LM-X11L, LM-V302L, LM-VB01L

2 OPERATING INSTRUCTIONS FOR GAL UNIVERSAL REMOTE CONTROLS LM-RC13L, LM-X11L, LM-V302L, LM-VB01L Congratulations on your purchase of the GAL universal remote control. After setting up the remote control, you can use it to control different devices. Before starting work, please read the contents of this manual. The universal infrared remote control is capable of simultaneously controlling various devices. It contains a large database of codes for various devices and also has a training function. Learning function refers to the procedure by which the remote control learns the infrared signals from other remote controls. When device codes are not included in the built-in database, they can be read from the original remote control. Package Included universal remote control and instruction manual. Remote control models differ in the number and location of buttons, design, and type of batteries (2xAA or 2xAA). In the LM-RC13L, the indicator lamp is located under the “SET” button. The process for setting up the remotes is the same. SET, LEARN Buttons for setting up the remote control TV, DVD, VCR, SAT, COMBI, Device selection buttons RCV, CAB, AUX “POWER” button to turn off the power SLEEP Sleep timer button “MUTE” button to mute the sound 0,1,2.. 9 Digital buttons AV Button for switching external inputs GO BACK, BACK Button for returning MENU Button for calling up the menu Menu navigation buttons -CH+ Buttons for switching channels INFO/DISPLAY -Vol+ Volume control buttons Buttons "Play", "Stop", "Back", " Forward" REC Record button EPG Buttons for output additional information Button for calling up the program guide TEXT Teletext buttons 2

3 GETTING STARTED Carefully, observing polarity, install two AAA batteries into the special compartment. Alkaline batteries are recommended. Remember to change the batteries at least once a year. Set up the remote control to work with the devices you need. There are several ways you can do this. After saving the code, turn on your device, for example a TV, switch the remote control to TV control mode using the “TV” button and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try a different code. If this does not help or you cannot find the device code at all, you can learn the buttons of the universal remote control using the original remote control using the learning function. ENTERING A CODE MANUALLY Find your device brand from the list of brands in the table. Each device brand is associated with one or more four-digit codes. Press and hold the desired device selection button, for example, "TV". After 3 seconds, when the indicator lamp lights up, release the button. Enter the four-digit device code. As each digit is entered, the indicator lamp flashes and after entering the fourth digit it will go out, and the code will be saved in the remote control memory. If the code you enter is incorrect, the lamp will blink twice and remain on until you enter the correct code. SEQUENTIAL CODE MANUALLY Press and hold the desired device selection button, for example, “TV”. After 3 seconds, when the indicator lamp lights up, release the button. Turn on the TV and point the remote at it. To select a code, use the “CH+” or “CH-” buttons. Each time you press a button, the remote sends a power-off signal, cycling through the codes in ascending (“CH+”) or descending (“CH-”) order, respectively. The light flashes while the signal is being sent. When the required code is found, your TV will turn off. Press the "OK" button, the indicator lamp will go out and the code will be saved in the remote control. In some modifications of remote controls, searching can be done using the “LEFT”, “RIGHT” OR “VOL-”, “VOL+” buttons, respectively AUTOMATIC CODE SEARCH Turn on the device you have chosen, for example, a TV and point the remote control at it. Press and hold the desired device selection button, for example, "TV". After 3 seconds, when the indicator lamp lights up, release the button. On the remote control, press and release the “POWER” button. The remote control will begin sending a power-off signal, cycling through the codes in ascending order every two seconds. The light flashes while the signal is being sent. When the TV turns off, press the "OK" button. The indicator lamp will go out and the device code will be saved in the remote control memory. Each time you start an automatic search, it starts from the last stored code. Once the cycle is complete, the indicator lamp will go out and the search mode will be disabled. The duration of the search cycle can reach 30 minutes. 3

4 SEARCH BY MANUFACTURER NAME USING THE NUMERIC KEYS. Find the device manufacturer in the list of brands in the table of digital buttons by company. Each numeric button corresponds to one or more companies. In this mode, the search is carried out within the selected companies. The duration of the search cycle in this mode is significantly reduced compared to automatic search. Turn on the TV and point the remote at it. Press and hold the desired device selection button, for example, "TV". Then press and hold the number button “1” (in the table this number corresponds to and, and for “2” it corresponds to Panasonic and Hitachi, etc.). The remote control will begin sending a power-off signal, cycling through the codes in ascending order every two seconds. The light flashes while the signal is being sent. When the TV turns off, release both buttons. The indicator lamp will go out and the device code will be saved in the remote control memory. You can release one of the buttons while searching. TABLE FOR SEARCH BY MANUFACTURER NAME KEY TV/RTV SAT DVD VCR NATIONAL FUJITSU LOEWE ONKYO LOEWE FUJITSU LOEWE 8 GE JERROLD APEX GE 9 0 MAGNAVOX GENERAL TECHNICS FISHER ECHOSTAR ECHOSTAR YAMAHA TECHNICS SYLVANIA ER GENERAL YAMAHA TECHNICS SYLVANIA FISHER 4

5 KEY COMBI AUX HIFI/CD TNT 1 ONKYO ONKYO ONKYO TECHNICS TECHNICS LOEWE APEX YAMAHA TECHNICS SYLVANIA FISHER HOW TO FIND OUT THE DEVICE CODE? EXAMPLE: FOR TV CODE Press and hold the desired device selection button, for example, “TV”. Then click on the "OK" button. Release both buttons. The lamp will blink once. This means the first digit of the code is 1. After a pause, the lamp will blink 10 times. The second number is 0. After the second pause, the llama will blink 3 times. The third number is 3. After the third pause, the lamp will blink 8 times. The fourth digit is 8. Then the mode automatically turns off. You can use a pencil to write down the stored codes on the inside of the battery cover. This may come in handy later. After saving the code, turn on your device and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try a different code. If this does not help or you cannot find the device code at all, you can teach the buttons on the universal remote control using the original remote control. 5

6 LEARNING FUNCTION LEARNING BUTTONS Press and release the desired device selection button, for example, “TV”. The lamp will blink once. Press and hold the LEARN button. After three seconds, when the light starts blinking continuously, release the button. The remote control has entered learning mode. Place your original remote control and the universal remote control opposite each other (sensor to sensor) at a distance of 1-2 cm. On the universal remote control, press the button that you want to learn. The lamp will begin to glow continuously. Press and hold the function button of the original remote. When the universal remote control lamp blinks twice and then starts blinking quickly, release the button. The training of the universal remote control button has been successfully completed. If the received data from the original remote control is not complete, the lamp will flash three times and turn on continuously, waiting to receive data from the original remote control. If you want to train several buttons, repeat the steps from the previous paragraph for each button. To exit learning mode, press and release the LEARN button. If you do not press any buttons, after 15 minutes the learning mode will turn off automatically. If one of the keys is poorly trained, training can be repeated. When reprogramming, data about the trained buttons is erased from memory. The “LEARN” buttons and device selection buttons (“TV”, “DVD”, “SAT”) are not trained. original remote universal remote GAL 2 cm ERASING LEARNING DATA To erase learning data for a specific device, press and hold the LEARN button, then press the device selection button, for example, DVD. The indicator light will flash three times. The learning data about the DVD player will be erased. To erase all training data, press and hold the LEARN button, then press the MUTE button. When the lamp flashes three times after two seconds, all saved data will be deleted. If the remote control does not have a button for selecting the device you need, for example, a CD player, you can program it with the “AUX” button. For some brands of TVs, the “POWER” button only has the function of turning off the TV. To turn the TV back on, you must press any number button. 6

7 PROBLEM SOLVING PROBLEM The manufacturer of your device is not listed in the code list. SOLUTION Use another method of selecting the code: brute force, automatic search, learning function. The remote control does not respond to button presses, the indicator lamp does not light up. The device does not respond or responds incorrectly to remote control commands. The remote control is not working properly. Install new batteries. The code may be entered incorrectly. Try entering a different manufacturer code for your device, or use the search method again to find the correct code, or use the learning function Remove the batteries for 20 minutes and then reinsert them SPECIFICATIONS LM-RC13L LM-X11L LM-VB01L LM-V302L Working distance, m Transmission angle Setting methods Dimensions (HxWxD), mm no less than 8 no less than 30 manual or automatic search in the code base, learning function 225x51x20 280x125x20 280x125x20 200x55x30 Weight, net, g Number of devices for simultaneous control Number of buttons Battery type (in not included) AAA elements 2 AA elements 2 AA elements 2 AA elements The warranty period for the product is 6 months from the date of purchase. For any warranty issues, please contact your local dealer. Product service life is 3 years. Made in China. Manufacturer: Tianchang Liming Electronics Co.,LTD, 1, Industrial Zone, Kinlan, Tianchang, Chuzhou, Anhui, P.R. China 7

9 McGrp.Ru Operating instructions and user manuals This manual was downloaded from the McGrp.Ru website. On this website you can view and download instructions for your household, kitchen and air conditioning appliances, car electronics and other useful devices. If you have any questions, you can ask a question about your device and the moderators will answer your question as soon as possible.

OPERATING INSTRUCTIONS UNIVERSAL REMOTE GAL Model LM-P170 GENERAL INFORMATION The universal infrared remote control is capable of simultaneously controlling various devices. He can

Introduction Purpose of the buttons Introduction Purpose of the buttons If the code you enter is incorrect, the lamp will blink twice and will remain on until you enter the correct code. For receivers under the General Satellite brand

INSTRUCTIONS FOR SETTING UP THE UNIVERSAL REMOTE CONTROL MUTE 1 2 3 4 5 6 7 8 -/-- 0 9 SUB MENU CH+ EXIT VOL+ OK VOL BACK CH SLEEP TV DVD CBL SAT Model GAL LM-P150 GENERAL INFORMATION Universal infrared

OPERATING INSTRUCTIONS UNIVERSAL REMOTE GAL Model LM-P150 GENERAL INFORMATION The universal infrared remote control is capable of simultaneously controlling various devices. He can

INSTRUCTIONS FOR SETTING UP UNIVERSAL REMOTE CONTROLS MUTE POWER TNT AUX VCR/CD TV SKY SAT DVD 1.,- 2 3 abc def ghi pqrs jkl tuv mno wxyz TXT 0 ESC guida tv primafila MENU interattivi TV VCR DVD SAT AUX COBIM

UNIVERSAL REMOTE GAL Models LM-P001, LM-P003 OPERATING INSTRUCTIONS GENERAL INFORMATION The universal infrared remote control is capable of simultaneously controlling various devices.

SETUP INSTRUCTIONS FOR UNIVERSAL REMOTE CONTROLS Model LM-LE008 LM-LE008 LM-LE008 OPERATING INSTRUCTIONS FOR GAL UNIVERSAL REMOTE CONTROLLER Model LM-LE008 Universal infrared remote control

Universal remote control with learning function GAL LM-S009L OPERATING INSTRUCTIONS General information The universal infrared remote control is capable of simultaneously controlling eight devices,

Touch universal remote control 8 in1. Model KM-U0126. Attention! - Do not press buttons while replacing batteries; - Before starting work, reinstall all commands. Operation: LED indicator

Instructions for the programmable remote control IRC F Contents Full instructions... 2 1. Installing batteries... 2 2. Setting up the IRC remote control... 2 3. Entering an additional code... 3 4. Search... 3 5. Visualizing the code...

Universal programmable and teachable remote control with touch screen for home theaters Congratulations! You have purchased the IR-TSC2 digital universal touch screen controller from KONIG.

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP6011 User Manual Contents 1 Universal

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP6013 User Manual Contents 1 Universal

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP3013 User Manual Contents 1 Universal

URC1000 LEARNING UNIVERSAL REMOTE CONTROL Please read the instruction manual carefully before operating DEVICE OVERVIEW 3 LOCATION AND FUNCTION OF CONTROLS 1 2

1 User Manual 8 in 1 Universal Remote Introduction The 8 in 1 remote control controls a wide range of audio and video equipment. It can replace up to six different control panels,

Instructions for using Qiuck, Clean & Easy Setup www.philips.com/urc 3 Contents 1. Introduction...................... ....................................4 2. Preparing the remote control

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP3011 User Manual Contents 1 Universal

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP2018 User Manual Contents 1 Universal

Quick Start Guide Digital Cable Receiver Product Description Open the box, the package includes: Digital Receiver User Manual Remote Control Power Adapter Batteries

Universal remote control "8in1" Introduction The remote control "8in1" controls a wide range of audio and video equipment. It can replace up to six different remote controls, so you'll need

CR80 User's Manual Universal Remote CONTENTS INTRODUCTION...................................................2 INSTALLING BATTERIES...................................2 FEATURES AND

For this Base, the Radio Remote Control “1 of 6” is used. The Device is selected from the top row double click corresponding green button QUICK GUIDE TO USING THE SATCON RF SYSTEM STEP 1

SATCON RF OPERATING INSTRUCTIONS RxCRB-LC-5V PURPOSE OF THE SYSTEM The SATCON RF system is designed to control ANY household appliances using the SATCON RF3 Radio Remote Control. Main characteristics of the system:

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP3014 User Manual Contents 1 Universal

Universal Remote For Home Video Theater System Operating Instructions Device Selection Buttons Introduction SBC RU8 You have made a great choice by purchasing this universal remote control

We are always ready to help! Register your device and get support at www.philips.com/support Have a question? Consult Philips SRP5016 User Manual Contents 1 Universal

DirecTV DirecTV 4 Remote Control User Manual Installing Batteries Your DirecTV 4 remote operates on 2 AA batteries (included with the remote). Battery usage and safety - Use

PURPOSE OF THE SATCON LC6 SYSTEM OPERATING INSTRUCTIONS The SATCON LC6 system is designed to control ANY household appliances using the RF3 Radio Remote Control. Main characteristics of the system: Unlike

SELECTING A REMOTE CONTROL SYSTEM By default, the IDEA Samurai X control code is set by the manufacturer. If for some reason the remote control command system fails, you will need to select a code

PURPOSE OF THE TRIKOLOR RF4 SET OPERATING INSTRUCTIONS The TRIKOLOR RF4 set is designed to control ANY household appliances (even air conditioners and splits) using the RF4 Radio Remote Control. Basic

Amino Remote Control 1. General Description 2. Batteries 3. Remote Control Functions 4. TV Control 5. MEDIABOX Functions 6. Trade Codes for the Remote Control 7. Tips for Ease of Use

The universal radio remote control LUMAX UR 270 is designed to control household appliances that have an infrared remote control (RC) (satellite receivers, DVD players, VCRs and

SATCON RF OPERATING INSTRUCTIONS RxCRB-LC-6M Contents PRECAUTIONS...2 PURPOSE OF THE SYSTEM...3 RADIO CONTROL SATCON-RF3...4 PURPOSE AND PRINCIPLE OF OPERATION...4 DESCRIPTION OF BUTTONS AND INDICATORS...4

OPERATING INSTRUCTIONS CONTENTS 1. General safety instructions 2. Introduction 3. Installing batteries 4. Description of ET35 plastic buttons. 5. Description of the ET35 “Touch screen” buttons. 6. Button programming

BRIEF GUIDE TO USING THE SATCON RF SYSTEM STEP 1 - PREPARATION Insert the batteries into the Radio Remote Control, strictly observing the polarity. Connect the RxCRB-LC base to a 220V power supply and install it in

H O M E E N T E R T A I N M E N T Universal remote control with LCD 8 in 1 Universal remote control with LCD Hama GmbH & Co KG D-86651 Monheim/Germany www.hama.com

TERMINAL TELEVISION ZALA User Manual Contents GENERAL INFORMATION... 3 Management... 3 Operations performed on home page interactive menu... 8 TV... 9 Channel selection and viewing

Operating instructions for universal remote control lazer fyt 9980 >>>

Operating instructions universal remote control lazer fyt 9980 >>> Operating instructions universal remote control lazer fyt 9980 Operating instructions universal remote control lazer fyt 9980 In the first and

USER MANUAL VIDIMAX Elecard itelec STB 820 Contents Service control buttons using the remote control... 11 Activating the set-top box... 12 Home page... 16 Menu... 17 Search... 17 Setting "Parental"

Instructions for use Rangefinder D60 D80 D100 Contents 1 Installing and replacing batteries 4 2 3 4 5 6 7 8 9 10 Safety precautions Screen Keyboard Getting started Measurement mode History and viewing saved data

BRIEF GUIDE TO USING Satcon RF5-LP800 Changes are subject to change, see www.satcon.ru Video instructions for working with the kit are available at www.satcon.ru Terms Remote control SATCON RF-5 able to operate

BRIEF GUIDE TO USING Satcon RF5-LP800 www.satcon.ru Video instructions for working with the kit are available at www.satcon.ru Terms Remote control SATCON RF-5 can operate in two modes - transmission

WR7 Programmable and Learnable Remote Control Operation Manual 1 Congratulations! You have purchased a programmable and teachable remote control Universal Remote Control

(L UMAX 4^ UR-270 UNIVERSAL RADIO CONTROL SEES THROUGH WALLS Purpose The radio remote control is designed to control household appliances that have a conventional remote control (satellite receivers,

Instructions for the universal remote control mac 2012 >>> Instructions for the universal remote control for mac 2012 Instructions for the universal remote control for mac 2012 If everything is in order, the key indicator will blink. Find the codes as a rule

PREPARING THE TV FOR OPERATION MAKING CONNECTIONS NOTE: Before connecting any device to the TV or disconnecting the device from the TV, turn off the power to the TV and

Electronic decoy Hunterhelp Master User Manual 1. Introduction These instructions apply to the product: electronic decoy - Hunterhelp Master (Hunterhelp M). 2. Purpose of Hunterhelp

Security and anti-theft system LOCKUS F2 BRIEF INSTRUCTIONS This manual contains only basic information about the operation of the system. Description of operation with compatible optional equipment not included

Polk Audio magnifi mini Soundbar for home theater system Quick start guide Page. 2 Thank you for purchasing a Polk product. If you have any questions or comments

Guide for starting the AuraHD network media player for the first time Thank you for choosing the AuraHD media player! This document contains a description and step-by-step instructions for connection, initial settings and launch

Instructions for the universal remote control uet rm-788 >>> Instructions for the universal remote control uet rm-788 Instructions for the universal remote control uet rm-788 We have added PDF file with setting up the Rolsen remote control in this article

222 8.3. DST301B51 - Programmable timer NAMES AND FUNCTIONS OF OPERATION MODE SECTION (Fig. 1, 2) UNIFIED OPERATION BUTTON OUTPUT Press this button to perform unified operation regardless of

Instructions universal remote control mac 2012 >>> Instructions universal remote control mac 2012 Instructions universal remote control mac 2012 Today I bought a HUAYU RM-643F remote control for the TRONY21tt02 TV, I can’t set it up

Remote control Operating instructions Air conditioner operating modes The air conditioner can operate in four modes. Each press of the “Mode” button turns on the next mode. Cooling cooling,

2 Contents. 1. Instructions for using the digibox...5 2. Equipment Amino-110...5 3. Capabilities of Amino-110...6 4. Installation...8 5. Organization of broadcasting on a television receiver...9 6. Main menu...10

Contents 1. Introduction...2 2. Purpose of MPU-5...2 3. Appearance MPU-5...2 4. Design and principle of operation of MPU-5...4 5. Specifications MPU-5...4 Turning on MPU-5...4 Selecting a cry to play...5

Instruction Manual Bluetooth Remote with Handset Function BRH10 Contents Introduction...3 Function Overview...3 Hardware Overview...3 Basic Information...5 Charging the Bluetooth Remote...5 Turning On

Digital IP television receiver IPSTB GDC User Manual St. Petersburg - 08 Contents Section 1 Cautions...3 Section 2 Device controls...5 2.1 Front panel...5 2.2 Rear

Name of operation Action 1 (Same for all operations): Table 4 Action 2 Action 3 Action 4 Action 5 Result 1 Register the Base in 2 Configure the button to operate the remote control within

Universal remote control vivanco ur 2 codes >>> Universal remote control vivanco ur 2 codes Universal remote control vivanco ur 2 codes It controls the basic functions of the devices for which it has been configured. If you don't

Instructions for use 1188 Internets ar TV, spring 2016 Contents What is “Internet with TV 1188” 4 Additional features TV 1188 4 Installing TV 1188 5 TV decoders and remote controls 5 The most common

USER MANUAL Digital television tuner INTRO DTV-09 1. Warnings 1. This product is intended only for professional installation on vehicles with an on-board voltage of 12 Volts.

Conference telephone Konftel 300 Description Konftel 300 Konftel 300 telephone set for conference calls, which can be connected to an analog line, GSM/DECT telephones

Purpose of the buttons:

Power on/off button for the selected device (POWER).

Remote control setting button (SET).

Numeric buttons for direct channel selection (0...9).

Play button (PLAY).

Stop button (STOP).

PAUSE button.

Record button (REC).

Rewind button.

Fast forward button.

Mute button (MUTE).

- button for selecting a device to control (TV, DVD, SAT, AUX).

Volume control buttons (Vol-/Vol+).

Channel switching buttons.

Getting started:

Carefully, observing polarity, install two batteries in the special compartment. Alkaline batteries are recommended.

Remember to change the batteries at least once a year!

Configure the remote control to work with the necessary devices. There are several ways you can do this.

After saving the code, turn on your device and check the operation of all buttons on the universal remote control. If any buttons do not work properly, try a different code.

Entering the code manually:

Find your device brand from the list of brands in the table. Each device brand is associated with one or more four-digit codes. Press and hold the desired SET button, then press the device selection button, such as TV. When the indicator light comes on, release both buttons. The indicator remains lit continuously. Enter the four-digit device code. As each digit is entered, the indicator lamp flashes and after entering the fourth digit it will go out, and the code will be saved in the remote control memory. If the code you enter is incorrect, the lamp will blink twice and remain on until you enter the correct code.

Manual code search:

If you do not know the manufacturer of your device or cannot find its code, you can select the code manually. To do this, first press and hold the “SET” button, and at the same time press the button of the equipment you have selected, for example “TV”. When the indicator lights up continuously, release the buttons. Then press the “SET” button once again, the indicator will start flashing. Point the remote control at the TV screen and press the POWER button. Each time you press this button, the remote control sends a power-off signal, cycling through the codes sequentially in ascending order. While the signal is being sent, the light flashes at an increased frequency. When the required code is found, your TV will turn off. Press the button of the selected equipment “TV”, the indicator lamp will go out, and the code will be saved in the remote control memory.

Automatic code search:

Turn on the device of your choice, for example a TV, and point the remote control at it. Press the desired device selection button once, for example, “TV”. Press and hold the SET button and the POWER button. After three seconds, when the indicator light comes on, release both buttons. The remote control will begin sending a power-off signal, cycling through the codes in ascending order every two seconds. The light flashes while the signal is being sent. When the TV turns off, immediately press any button (except the SET button) to stop the automatic search. The indicator lamp will go out and the device code will be saved in the remote control memory.

After the cycle is completed, the indicator lamp on the remote control will go out and the search mode will turn off. The duration of the search cycle can be up to 30 minutes. Every time You start the search, it starts with the last saved code. If you did not manage to stop the automatic code enumeration in a timely manner, you do not have to repeat the entire cycle again. Find out the current programmed device code, subtract a few units from it, enter the resulting value manually and then use the procedure manual search code. For example, you started automatically searching for TV. The TV turned off, but you stopped the search a little late, so the subsequent code, for example “1015,” was stored in the device’s memory. Manually program the code "1000". Then start the manual search procedure. If the required code is “1012”, then after the twelfth click on the “POWER", the TV will turn off.

How can I find out the current programmed device code?

Press the button of the selected device on the remote control once, for example, “TV”.

The first digit of the code can be found as follows. Press and hold the “SET” button and press the “1” button at the same time. Release both buttons. If the first digit of the code is 1, the indicator will blink once. The absence of an indicator signal means that the code number is “0”.

Second digit. Press and hold the “SET” button and simultaneously press the “2” button. Release both buttons. If the second digit of the code is “5”, the indicator will blink five times. The absence of an indicator signal means that the code number is “0”.

Third digit. Press and hold the “SET” button and press the “3” button at the same time. Release both buttons. If the first digit of the code is “7”, the indicator will blink seven times. The absence of an indicator signal means that the code number is “0”.

Fourth digit. Press and hold the “SET” button and press the “4” button at the same time. Release both buttons. If the first digit of the code is “3”, the indicator will blink three times. The absence of an indicator signal means that the code number is “0”. After saving the code, turn on your device and check the operation of all buttons on the universal remote control.

For some brands of TVs, the "POWER" has only the function of turning off the TV. To turn the TV back on, you must press any number button.

If your TV does not support certain features, such as the "MUTE" (mute), button "MUTE" on the remote will not function.

Code distribution table:

TV - 0000…0268, 0700…0746, 1000…1037.

DVD - 0269…0370, 0750…0754, 0524…0690, 3000…3018.

SAT - 0371…0523, 0800…0884, 2000…2024.

AUX, CD, DVD - 0524…0690, 3000…3018.

Specifications:

Working distance is at least 8 meters.

The transmission angle is at least 30 degrees.

Setting methods - manual or automatic search in the code database.

Dimensions (HxWxD) - 195x80x30 mm.

Net weight - 210 g

Five devices for simultaneous control.

Number of buttons 32.

Batteries AAAx2 pcs.

If you lose your TV remote, you don’t have to worry about it. There are always universal remote controls on sale that, after a fairly simple procedure, can easily replace the original model. The process of connecting to the TV will take no more than 10-15 seconds. It is only important to know how to set up a universal remote control.

Device structure

The design of the universal remote control is no different from the original models. Both types of devices have buttons for selecting channels, adjusting sound, setting a timer, and others.

Typically, both devices run on the same AA or AAA batteries. If you use one remote control for a large number of devices, then the batteries will have to be changed more often than in a conventional model.

Some features of the internal device may determine which devices can be controlled and how to configure the universal remote control. Gal LM p001, for example, has the ability quick connection to TV and SAT. Some other models do not have this feature.

Comparison of the original remote control with the universal one

There is no external difference between the two types of control devices. They differ only in the set of functions.

The first and main difference is that universal remote controls can be connected to a large number instruments and devices. They can be used simultaneously. For example, using one universal remote control you can turn on a TV, air conditioner, stereo system and any other electrical unit that allows remote control. The remote control will also allow you to control home theater functions, satellite dish and cable TV.

In addition, the cost of a universal remote control is lower than the original model, and the service life is usually longer.

For owners of older TV models, such a universal device will be a lifesaver if the original controller is lost. Original remote controls for previous years' models are simply not produced.

Are they really universal?

Any remote control can be used with different models TVs, players and air conditioners. Of course, there are exceptions. For example, what should you do if you can’t set up a universal remote control? How can I check if it fits a given device model? First, you need to look at the list of compatible models in the instructions for the remote control itself. If there are no instructions regarding this, and the connection cannot be established, the problem may be in both the remote control and the TV.

The versatility of remote controls is determined by the fact that, unlike original devices, which can be configured to work with only one device, they can simultaneously work with different devices from various manufacturers. At the same time, they do not have to be reconfigured every time.

How to set up a universal remote control

To establish a connection between your TV or other device and the universal remote control, you need to follow these steps:

Turn on the remote control and point it towards the device.
Simultaneously press the OK or SET button (depending on the remote control model) and hold for 3-5 seconds.
Enter the code corresponding to your device model.
Then press the TV button to make sure it is connected.

If for some reason the remote control does not connect to the TV, you need to do these steps again. The device code may have been entered incorrectly.

There is another way to configure the Huayu universal remote control. To connect such a device, you can use auto search:

Turn on the device you want to configure.
Press the SET button and then POWER.
Release the buttons simultaneously.
Press the POWER button again and release.
Check if the sound volume indication appears on the screen.
Press the SET button twice in a row.

Not all models of universal remote controls support the function automatic search. It is also possible that the auto search function is not supported by the TV model itself. Therefore, for some cases, there is only one way to configure the LM P001 universal remote control - manually.

Some brands differ in function quick search. To connect in this way, you need to perform the following algorithm:

Turn on the device you want to connect to.
Press and hold the TV button for a while.
Release the button when the power indicator lights up.
Press and hold the MUTE button.
When the connection occurs, release the button.
It's easy to check the operation of the remote control - just change the channel or adjust the sound.

If none of the methods worked and the code specified in the instructions did not work, you can use the last method - sequentially searching through the code manually.

How to determine the TV code

Each device model has its own universal code, which allows you to connect a remote control to it. It comes in three, four and five characters.

For example, to find out how to set up a universal remote control for Samsung, you need to look at the code information in the instructions for your TV or air conditioner.

It is important to remember that you need to enter the code of the connected device, and not the universal remote control.

Smartphones with universal remote control function

Some newer brands of phones allow you to use them as a universal remote control. As a rule, they can only be connected to TVs with the SMART TV function.

To set up a universal remote control on your smartphone, you will need to download a special application and follow the installation instructions that will light up on the screen. Using the program, you can interact not only with the TV, but also with other devices that allow remote control functions.

This useful feature Available for a limited number of smartphones and TV models. To use your phone as a remote control, both devices must have a Wi-Fi module, an infrared port, or Bluetooth connectivity.

The universal infrared remote control is designed to control televisions, DVD players, home theaters, satellite, cable, and terrestrial receivers digital television. Adapted for satellite receivers"Tricolor TV". Built-in code base from various manufacturers. Code selection manually or automatically. Various ways remote control settings. Search by manufacturer name. Large database of codes from various manufacturers. Various ways to configure the remote control. Ergonomic button layout. To control four devices.
Devices with which the remote control works: TVs, LCD and plasma panels, projectors and projection TVs, DVD players and recorders, home theaters, VCRs, satellite, cable, terrestrial digital television receivers, various audio devices, code added for GS8300, GS8302, GS8304 receivers , GS8306, used in the Tricolor TV broadcasting system.
Technical characteristics: number of devices for simultaneous control - 4; number of buttons - 36; dimensions: 150x50x19 mm; weight - 46 net; Battery type - 2 AAA elements.

The appearance of the product may differ from its image in the online store.
The photo shows a sample presentation/serving of the product.
The quantity of goods when placing an order can be changed downward if the required quantity of goods is not available.