What to do if Internet Explorer is not responding. Restoring Internet Explorer Opens ie

Why does it happen that some sites open on the computer, while others do not? Moreover, the same site can open in Opera, but in Internet Explorer the attempt will be unsuccessful.

Mostly, such problems arise with sites that operate using the HTTPS protocol. Today we will talk about why Internet Explorer does not open such sites.

Correctly setting the time and date on your computer

The fact is that the HTTPS protocol is secure, and if you have the wrong time or date set in your settings, then in most cases you will not be able to access such a site. By the way, one of the reasons for this problem is a dead battery on motherboard computer or laptop. The only solution in this case is to replace it. The rest is much easier to fix.

You can change the date and time in the lower right corner of the desktop, under the clock.

Reboot devices

If everything is fine with the date, then we try to reboot the computer and router one by one. If this does not help, connect the Internet cable directly to the computer. This way you can understand in which area to look for the problem.

Checking site accessibility

We try to access the site through other browsers and if everything is fine, then move on to Internet settings Explorer.

Let's go to "Service - Browser Options". Tab "Additionally". Checking the checkboxes SSL 2.0, SSL 3.0, TLS 1.1, TLS 1.2, TLS 1.0. If not, mark and reload the browser.

Reset all settings

If the problem does not disappear, go to again "Control Panel - Internet Options" and we do "Reset" all settings.

Checking your computer for viruses

Very often, various viruses can block access to sites. Carry out a full check installed antivirus. I have NOD 32, so I’m showing it on it.

For reliability, you can use additional utilities such as AVZ or AdwCleaner.

By the way, the antivirus itself can block the desired site if it sees it as a security threat. Usually, when you try to open such a site, a blocked message is displayed on the screen. If this was the problem, then the antivirus can be disabled, but only if you are confident in the security of the resource. Maybe it’s blocking for good reason.

If none of the methods help, then your computer files have been damaged. You can try to roll back the system to the last saved state (if there was such a save) or reinstall the operating system. When I encountered a similar problem, the reset option helped me.

IN Windows 10 there is a new web browser Microsoft Edge . Streamlined interface, improved ergonomics and a large set of functions Microsoft Edge distinguish this browser from its predecessor. However, if you prefer Internet Explorer, we will tell you how to find and launch this web browser.

Launch Internet Explorer from Microsoft Edge

The selected web page will open in Internet Explorer.

Find Internet Explorer using the command line

Find Internet Explorer in the search box

Open Internet Explorer using Cortana

How to make Internet Explorer your default web browser

Click OK to exit Browser properties.

How to create a shortcut for Internet Explorer on your desktop

Click right click mouse on Internet Explorer >Create shortcut:

Label Internet Explorer will appear on the desktop.

Image: © Tinh Khuong - Unsplash.com

If your browser suddenly stops working and you're not sure why, there are a few steps you can take to resolve the issue.

The browser may stop working, become unresponsive, fail to load sites properly, or close suddenly.

Internet Explorer is generally very stable and most problems you experience can be easily resolved by updating the browser or the system as a whole.

Additionally, the IE browser may be rendered unstable by adding certain add-ons or plugins, which means you may need to remove those plugins (at least temporarily) to see if they are the source of the problem.

If nothing solves the problem, you may need to reset your Internet Explorer browser completely.

Make sure you have the latest software

Internet Explorer browser is updated regularly. These updates solve many bugs in your system. You can have your browser update automatically. How to automatically update your browser:

1. Open your browser.
2. Click on the "help" icon.
3. Click on the “about” option.
4. Check the box: “Install new versions automatically.”

You can also go to the main Microsoft website to find new versions of the IE browser yourself.

If you are sure that you have latest version browser and want to make sure you have all system updates installed, do the following:

1. Windows XP, Windows 7, click the start button.
2. Windows 8: icon with right side screen.
3. Click on the Windows Update icon.
4. Click to install updates.

If you can't install new updates, it means your computer has already been updated.

Sometimes, third party applications may contribute to unstable Internet work Explorer. You can determine if this is the case, then disable these add-ons and then try to start the program.

To disable add-ons, toolbars and plugins:

1. Click on the "service" icon.
2. Click on Manage Add-ons.
3. Windows XP, 7: You will need to look at each category, one by one.
4. Windows 8: Select all add-ons.
5. Click on each one and then click the disable button.
6. Click "close".

If these solutions still do not solve your problems with Internet Explorer, you may need to turn off hardware acceleration.

Hardware acceleration is used to improve the performance of your graphics card. This is not always necessary and can reduce performance. At the same time, disabling acceleration often solves some problems with displaying pages on the Internet.

The last thing you can do to customize your browser is to reset it to its default settings.

You should use this option with caution as it will delete all your personal settings. This includes saved passwords, bookmarks and more.

1. Click on the "service" icon.
2. Click on "Internet Options".
3. Click on "privacy".
4. Click "reset".
5. Confirm.
6. Click "close".
7. Click OK.

Windows was the first truly multitasking operating system. Its development took a long time and gradually, it still holds one of the leading positions. Convenience and comfort in using Windows provide all kinds of system processes. One of them is the explorer process.

What is explorer.exe and how does it work

The explorer process is a component of Windows Explorer. Without it, neither the “Taskbar” nor the icons and shortcuts on the desktop work, the work of some Windows applications. Imagine that you turned off the display of icons, hid the “Taskbar” and the “Start” button - but you can’t turn them back on, even by calling the “Task Manager”. It is interesting that the explorer.exe process can be started and terminated through the same “Task Manager” - Windows Explorer is sometimes closed along with unnecessary programs to reduce the PC's energy consumption at night, and then start it up again in the morning. But sooner or later there comes a time when explorer.exe stops working normally.

The essence of the problem with starting the explorer.exe process

It happens that Windows system It loads, but after the Microsoft logo and the “welcome” screen there are no icons or shortcuts, the “Taskbar” and “Main Menu” with the “Start” button are not controllable, and no matter how you click the mouse buttons, it is impossible to start working in any of the available programs. Reboot, hibernate, sleep mode of Windows do not work. Only turning it off by pressing the power button can work - and not always. On older computers, the “hard” method worked - pressing the reset button on system unit PC.

The main reasons for the explorer.exe process not working

The explorer.exe system process fails in the following cases:

• Windows system has been attacked by a virus: settings have changed Windows registry or damage to the executable program explorer.exe, which launched Explorer;
• incorrect settings of the PC user: without fully realizing his actions, he “tricked” with the Windows registry settings;
• interference from other users local network or through the network of the same Internet provider;
• errors caused by incorrect termination Windows operation: abuse of the Reset button, switches on the system unit, pressing and holding the power button, pulling the battery out of the laptop, etc. As a result, errors will accumulate, and registry entries may become damaged, including explorer settings;
• Frequent installation of new programs.

Variants of explorer.exe process errors

When the explorer.exe process is not running, you may receive the following error messages:

• appcrash explorer.exe - triggers when an application is incompatible with Windows Explorer, for example, the first versions Mozilla Firefox with Windows 7, 8, 8.1 and 10;
• explorer.exe Class not registered is a message from another Windows component, the Microsoft Management Console. Windows component for fine tuning operating system and its built-in applications) when trying to configure third-party applications;
• unspecified explorer.exe process errors: Windows does not report an error code when Explorer crashes and restarts explorer.exe automatically.

Solving the problem with the explorer.exe process

There are several ways to fix a process error.

Checking your PC for viruses and other unwanted software

This is where they start. There are a lot of antiviruses: Dr.Web, NOD32, Avast, KAV, Panda, 360 Total Security, etc. You can use several of any antiviruses in turn.

Start Windows in Safe Mode

If explorer.exe starts after anti-virus checks, reboot the Windows system into normal mode and among your programs, find the one that interferes with the normal operation of the explorer.exe process. It is possible that explorer.exe is missing among the running processes or, less commonly, it is “loading” RAM and the processor, creating multiple copies, similar to svchost.exe. But unlike svchost, there should be only one explorer.exe.

To check explorer.exe in safe mode Windows do the following.

System Restore

To enter the System Restore application, do the following:

1. Click: “Start” - “All Programs” - “Accessories” - “System Tools” - “System Restore”.

   After this window appears, click "Next"

2. Select any restore point in the calendar for the last weeks - with a date before the explorer.exe problem appeared - and click the "Next" button.

   Select Windows recovery mark

3. Confirm Windows recovery by clicking "Done".

   Click the ready to restore button

4. Please confirm again - Windows does this for security reasons.

   Confirm again

5. Windows will restore system files and parameters. After repeated Windows startup you will see an information window indicating successful recovery.

   When you see the system restore success message, close the window

6. It happens that Windows recovery failed. Viruses that have damaged the data of recovery points (copies) may be to blame for this. In this case, repeat the Windows system restore using another of the available restore points.

   Start the recovery process again - from a different point

If the problem with explorer.exe continues, boot Windows from the last saved configuration.

Loading Windows Last Known Good Configuration

This method is similar to the previous one. Follow these steps.

1. End your current Windows session.
2. When the manufacturer's logo appears on the display, press F8.
3. Select Run Windows Last Known Good Configuration.

Select Last Known Known Configuration

The Windows system will start in normal mode, with adequate settings and the explorer.exe process running. Windows Last Known Good Boot mode only corrects system settings; drivers, application programs and it will not affect the user’s documents. For example, it is impossible to restore erased files or non-working drivers in this way.

Run explorer.exe via Task Manager

Do the following:

Similarly, explorer.exe is launched by the “Start” - “Run” command.

Run explorer.exe via command line

To run explorer.exe using the Windows command line:

1. Give the command: “Start” - “All Programs” - “Accessories” - “Command Prompt”.
2. Type: start C:/Windows/explorer.exe (if Windows is installed on drive C).

Run explorer.exe via command line in safe mode

Restore Explorer to safe operation Windows mode:

Restoring explorer.exe using the registry editor

Recovering explorer.exe from Windows installation media

1. Start Windows in Safe Mode.
2. Open Windows folder(most often the explorer.exe file is located there).
3. Insert the disk from which you installed Windows, find the I386 folder and copy the explorer.ex_ file.
4. Rename this file to explorer.exe (“the dash” in the .ex_ extension is replaced by “e”).
5. Move the file to the Windows folder on drive C: - Windows will ask you to replace it, replace the file.
6. Take out installation disk and restart Windows.

Other ways to “fix” the explorer.exe process

Other ways to repair explorer.exe:

• reinstalling Windows from scratch,
• Windows update from Microsoft website
• replacing explorer.exe using AVZ utilities etc.

Video: how to restart the explorer.exe system process if window and icon management is stuck

Restore normal work windows, "Taskbar" and "Main Menu" is not a problem. If you have lost control of program icons and windows, the steps described above will help normalize the operation of the explorer.exe process, without which you can’t have fun or work on the Internet.