What to do if the sound in your headphones is low - a guide to increasing the sound volume. Quiet sound on a computer - ways to increase the volume Boosting sound in headphones

When buying new headphones, the question often arises about how to make the headphones louder. We'll look at several ways to get louder sound from your headphones.

1. Check the system volume

The first thing to do if sounds are playing very quietly is to check the volume on the system itself. This is true not only for headphones, but also for speakers and other audio playback devices.

To check the volume, do this:

• There is a volume icon in the tray. First, click on it and check if the volume slider is at its highest level.

• If everything is fine there, check the same parameter in other programs. To do this, click on the inscription “Mixer” in open window.
• The Volume Mixer window will open. See if all the sliders are in the highest position.
• Also be sure to check if there is a red circle next to one of the volume labels. They are located at the bottom, right under the sliders.

It is quite possible that you accidentally turned off some sounds and in order for the headphones to play louder, you need to return everything as it was.

2. Check your drivers

It is likely that the sound on your computer is too quiet due to system failures. Most often they concern drivers.

Therefore they should be updated. This is done as follows:

• Find "Device Manager". You can do this by using the search in the Start menu. The second way is to go to the “Control Panel”, open the “System and Security” section, then in the “System” block open the corresponding item.

• The required window will open. In it, select the “Sound, video and gaming devices” section.
• There you need to find the sound card. You can recognize it by its name. But even if you can’t do this, remember that it definitely won’t hurt to update the drivers for all devices. To do this, click on your device right click mouse and in the drop-down menu select “Update drivers...”

• Next, select the option “ Automatic search updated drivers" and follow the instructions.

• If the driver is the most current, this will be written in the same window. And if not, a corresponding message will appear and you will be asked to install more current version. Do it.
• Repeat the same procedure for the remaining devices in the "Sound, video and gaming devices" section if you are not sure which one - sound card.

Now let's move on to methods that relate not to the computer as a whole, but specifically to headphones.

3. Check the connectors

Often the sound in headphones on a PC becomes too quiet for a very common reason - clogged connectors.

In this case, the sound will become increasingly quiet. This is very important for old computers, where they have already been inserted into and removed from the connectors many times. various devices. Contacts deteriorate, which becomes the cause of the problem in question. At the same time, the sound is quiet, regardless of the headphones you use.

Remember: If the problem appears only on one earphone, the problem is only in them.

To clean the connectors, you can use one of the following tools:

• toothpick with cotton wool (alcohol on cotton wool);
• match with cotton wool;
• any other oblong and thin object with cotton wool and alcohol.

Just make a few rotational movements in the connector and be careful that there is no cotton left there. If this does not help, you will still have to return to the settings.

4. Activate Internal Sound Enhancement Features

There are a number of settings that help you complete the task very quickly.

Here is their complete list:

• Loudness compensation. To access this setting, go to Control Panel, then select the Hardware and Sound section on the left. Click on the "Sound" button. In the window that opens, the “Playback” tab will be opened by default. Click on "Speakers" and the "Properties" button. Another window will open. In it, go to the “Improvements” tab and there check the “Loudness Compensation” box.

• Maximum level. In the same window, go to the “Levels” tab and set the slider responsible for the speaker to the maximum level.
• Limited Output. The speaker properties window may look different on different computers. In some cases, there is a “Special” tab and a “Limited Output” item. If so, check it.

After such manipulations, click “Apply” and “OK” to save all changes.

5. Set up the driver

It happens that the driver not only needs to be updated, but also needs to be configured correctly. This item allows you to configure the speaker configuration, full-range speakers, sound volume and other parameters.

This is done as follows:

• In the “Control Panel”, “Hardware and Sound” section, select “ Realtek Manager HD." It is quite possible that in your case this manager will be called differently, depending on the sound card models. But in most cases it will be exactly like that.

• Check all possible options on the Speakers tab. Move the volume slider to the maximum position. Check to see if the sound is muted (there is a red circle on the speaker icon). Please note that the “Front left and right” boxes must be checked, as well as “ Surround Sound in headphones." Also pay attention to the “Sound Effect” and “Standard Format” tabs, as well as the connector icon under the “Analog” label.

• Finally, click "OK" and close the window.

If all these points are completed, then the problem is in the system itself and it needs to be solved by replacing the sound card, connecting speakers (and headphones through them) or using an additional software.

6. Use special software

Here are the easiest to use and effective programs for increasing volume:

• Sound Booster (can be downloaded from letasoft.com). Very easy to use. To make it more convenient, select the interface language “Russian” and raise the slider to the maximum level. The program will get the most out of your PC/laptop!

• Audacity (can be downloaded from audacityteam.org). This program can increase the volume of a specific track. Load the track into the program, select “Signal normalization” among the plugins and experiment with the dB value. First, try setting -3.0 dB.

• Audio Amplifier Free (you can download it, for example, from soft.mydiv.net). Everything is simple here. In the right block “Change volume” you need to set the volume value from 1 to as much as you want and save the resulting track.

These methods will definitely help you increase the volume of a melody or movie in your headphones on your computer.

In this post, we’ll look at how to make the sound on a computer or laptop louder if everything is at maximum. Sometimes the audio level in a file is low and the volume may not be sufficient for comfortable listening. The volume may be low only on headphones or only when played through speakers. However, if there is a need to raise the volume to a comfortable level, how can this be done? In all of the above cases, it is assumed that the audio equipment of the PC or laptop is in full working order.

First What you need to do to increase the volume on a laptop is to check the volume level through the tray icon. Through this icon you can open additional items in the “audio” section if you click on the speaker picture at the top and check all the settings, especially in the “levels” item.

Second. Through the control panel, find the “sound” section, there we find the properties of our playback device. In the “additional features” section, in the “Volume equalization” item, check the box and check the volume level on the desired file.

Third. Connect external speakers with a built-in amplifier (computer).

Fourth. Install audio codecs from the K-Lite-Codec package; you can easily download such a package from the developer’s website and simply run the exe file. The Media player will also be installed along with the codecs. Player Classic. Launch the file with quiet sound on Media Player Classic and see the section Play > Filter > ffdshow audio decoder. And here we find the item (on the left) Volume and you need to click on it with the left mouse button. Then a window with a volume control will open, adjust the volume as you need.

How to adjust the sound in a laptop using a player. In Media Player Classic, you can right-click on areas of the video being played and select audio. There will be an options item, and move the “boost” control to the desired level.

Fifth. You can try opening the mixer in the volume settings from the tray. There, select speakers > enhancements > equalizer and when the equalizer opens, move the sliders up and save this position as a setting. But sometimes in the equalizer menu it is not possible to adjust frequencies and you can only select preset settings.

Sixth. As in point five, go to the enhancement settings and check the boxes for equalizer, virtual sound and loudness. This may increase the sound.

Seventh. As in point five, go to improve the sound of the speakers and check the box only on the loudness compensation item (the rest are empty), and at the top we note “turn off all sound effects" Then click “apply” and “ok”.

Ninth. We use a program to increase the volume on a laptop. Install Letasoft Sound Booster, which will increase the volume 5 times on any applications, including players. Unlike VLC and Media Player Classic, which control the volume of only the files played on them.

Please remember that too much volume may damage the built-in speakers. First, interference will appear in the form of rattling, and then the built-in speakers will stop working completely.

I also want to note that the sound may be quieter due to audio. On my motherboard Asus P5Q SE/R, if there is no wood for sound, including the equalizer adjustment panel, then the sound is much louder. If I use firewood, the sound is quieter and I have to turn the sliders to the maximum.

All the best to everyone!

From my own experience, I can say that users most often encounter the problem of quiet sound when reinstalling Windows OS (less often when replacing equipment with new ones).

In general, there is a quiet difference: if you turn up the volume to 100%, and the sound is barely audible, then the problem is obvious, but if you expect the volume from a budget laptop to be like music. center - no comments here, my article is unlikely to help you.

In this article I would like to give several reasons why the sound may deteriorate (crackling, grinding noises may appear) and the volume may decrease. In general, I will give tips on increasing the volume. So...

Causes of quiet sound. How to amplify the sound!

1) “Fine” sound tuning: loudness compensation and communication

Now about something more interesting - about communication...

There is such an option in Windows as “communication” - the point is that “smart” Windows reduces the volume when using the computer for conversations (i.e., as if it does a plus for you - so that you can hear the interlocutor better). But it happens that this option works very poorly - and it always reduces the sound, and not just during conversations...

To check this: click on sound icon in the tray (next to the clock) and open the “Sounds” link (see screenshot below). Then open the tab "Connection" and set the slider "no action required" (see point 2-3 on the screen below). Save the settings and restart your computer (the last step is mandatory!). Then test what the volume is.

A few words about loudness compensation

There is another option in Windows that can significantly affect the volume. We're talking about subtleness - special option to eliminate loudness differences taking into account the peculiarities of human perception. If you have problems with quiet sound, I recommend this enable option .

To do this you need to go to settings "SOUND", open tab "Play" , then select your playback source (speakers, headphones) and go to them properties (see screenshot below, arrow 1-2).

Then open the "Improvements" tab and in the properties find the option "Loudness of Compensation" - turn it on, save the settings and check the sound quality again (by the way, in Windows 8.1 this option is called a little differently - " Additional features/ volume equalization").

Loudness compensation

2) Checking connectors and wires

One of the most common causes of sound distortion, noise, crackling, and decreased volume is poor contact between the speakers of the speakers (headphones) and the computer sound card.

This occurs, most often, due to “broken” connectors and plugs, as well as damage to the wire insulation (an example of a torn headphone wire is shown in the photo below). If such defects appear, I recommend replacing the wire (or re-soldering it, if you have such experience...).

Broken headphone wire

In general, a wire tear may not be “visible” - i.e. the braid on top will be unharmed, while the copper core inside will be damaged. Try to twist the wire, and if the sound disappears, then appears, distortions occur - the problem is obvious.

You can also check your headphones (speakers) by connecting them to another PC (tablet, music center, etc.). If the problem is related to the connectors on the sound card, then either repair it or use an external sound card. Now, for example, there are such “babies” the size of a regular flash drive, while many of them can produce sound quality no worse than built-in sound cards.

3) Checking and updating drivers

Drivers are to blame for every 3-4th sound problem! More precisely, their absence, or the wrong version for a given OS.

In general, most often, if there are problems with the sound driver, there is no sound at all (I apologize for the tautology). But it happens that there was (for example) Windows 7 - and then it was updated to Winodws 8/10. According to my observations, after such an update, there are problems with sound...

In Device Manager, open the tab "Sound, gaming and video devices" . This tab should display your sound card (for example, in the screenshot below - Realtek High Definition Audio).

If instead, the tab is empty, or you see the " Unknown device" with a question mark means there is no driver.

Important! If you have problems with audio drivers, I recommend reading the following article:

To update the driver on Windows - just right-click on the device (for which you are updating drivers), and context menu select "Update drivers" (arrow 1-2 on the screenshot below).

For example, the screenshot below shows the program (available at the link above) Driver Booster, with which to update sound driver you can do it in 1 click... Convenient? Comfortable!

Update audio driver in 1 click!

4) Setting up an audio driver: using Realtek as an example

The volume also depends on the settings of the audio driver (and on the version of the driver itself, but this was discussed a little higher. I suggest considering the settings based on one of the most popular drivers - Realtek...

4.1 Device selection

When you connect a device to the input of a sound card, as a rule, a message from the Realtek driver pops up asking you to indicate what kind of device you connected. The volume level also depends on the correct type of device.

In some cases, forced switching of the device type helps: from headphones to speakers (or vice versa). Try both options.

Note: to open the window for selecting the type of device to be connected, try removing the plug from the speakers (headphones) from the sound card and inserting it again.

4.2 Adjusting the playback volume level

In the Realtek sound card control panel there are several volume sliders (something like a mixer in Windows). For example, if your Front slider is set to 60% (and the speakers are connected to the front system unit) - then until you raise it to 100%, the sound will not become louder!

So a simple tip: open the mixer in Realtek and set all the volume sliders (that will be there) to 100%!

Addition! If you have headphones (speakers) connected to the front panel of the system unit, try connecting them to the back side.

If you have weak sound only when watching movies or listening to music, then most likely the problem is in the audio-video codecs (or players).

The advice here is simple: REMOVE completely all codecs from the system and try to install the set from K-Lite Codec Pack(detailed description here:). Moreover, when installing, be sure to turn on the mode "Lots of stuff", as in the screenshot below. This way you will get all the necessary and modern codecs for today).

How to install codecs correctly...

By the way, pay attention to the VLC player - it is not only good for playing network video, but also for watching video from hard drive. It has an option by increasing the sound volume up to 125%!

Best codecs (in my opinion) -

10 Free Players for Windows -

6) Programs to enhance volume

Programs to increase volume on a computer -

• installed, configured once and it works (starts every time you turn on the computer);
• increase the volume up to 500%!
• supports all popular programs, games, players, etc.: Skype, ICQ, Windows Media Player, etc.

That's all for me. I hope at least one recommendation works!

Thanks in advance for any additions on the topic. Good luck!

Most computer users, and in general people on the planet, love to listen to music, and this is not at all surprising, because it gives positive emotions, calms people down, or has a number of other positive effects on a person’s mood. At the same time, in order not to disturb others, most people prefer to use headphones, thereby also getting privacy with their favorite compositions.

But when playing various tunes on a computer, you often get the feeling that the sound is too quiet, and therefore you have to figure out how to increase the volume in the headphones on the computer and bring it to a normal level. In fact, most often this indicates a certain equipment malfunction or incorrect settings networks.

Before carrying out work, try checking the volume level on the PC itself, turning the regulator on the headphones (available on almost all models), and also looking at the settings in the game or in the player in which you watch movies or listen to music.

What could this be and how can I fix it?

Since you cannot increase the volume in headphones on a computer beyond the maximum level, too low a volume may indicate a specific problem. In other words, if you “twist” all the levers to 100%, but there is practically no return, you could encounter a certain problem and here you need not figure out how to amplify the sound in headphones on a computer, but look at the condition of the device itself.

First of all, check that the connectors are making proper contact. All sorts of problems always occur with wires and plugs - they may not be inserted completely or incorrectly, periodically fly out, and so on. It also happens that we are talking about a real malfunction of headphones or speakers, which also occurs quite often, because this is quite fragile, but at the same time unstable equipment.

Since you most often cannot increase the volume of headphones on your computer immediately after an update, try restarting it and look again.

Among other things, before figuring out how to amplify the sound on your computer, try connecting your headphones to some other PC. Not all devices support really high volume, and sometimes you have to settle for a medium level.

Many people have had cases when, while working or listening to music, there were some problems with the sound, for example, very quiet or loud. People usually experience this when using headphones because they are the most convenient to use. In this article we will talk about how you can increase the volume in headphones and what are the reasons for the quiet sound in them.

How to increase the volume on headphones

Exists large number reasons why the sound in the headphones may be very quiet or simply disappear. Let's look at all of them, starting with the first one.

How to boost the sound in your headphones and make everything louder? First you will need to go to the panel Windows management, you can do this by clicking “Start”, then “Control Panel”. There you will find a large number of different tabs, but we need to go to the “Sound” section, where you can adjust the sound of the headphones. First you need to see if the headphones are turned on and turn them on if for some reason they were turned off.

Solving the problem

In the Sound section, you should have two tabs. One of them is responsible for the speakers, if any, and the second is responsible for the headphones; it is this tab that we need to go to. After you double-right-click on “Sound”, you need to go to the “Advanced Features” tab, where you can find a function that helps increase the volume of the headphones, and also listen to exactly how this volume has changed. Don’t forget to click on the “apply” button, otherwise all your settings will simply not be saved and you may think that this did not bring any results.

It is worth updating the drivers, as there are cases when headphones do not work well simply because the drivers for them have not been updated for a long time. In order to update the drivers on your headphones without any effort, you just need to go to the device manager located on your computer. How to find him?

1. You can go to it by right-clicking on “Computer”.
2. After that you need to click on the “Properties” tab, it is located below all.
3. Next, on the left you will see the dispatcher itself, which you will need to left-click on. Once you have done this, go to the Sound Devices section.

This section will help you solve all driver-related problems. This is where you can see what drivers are installed on your operating system, whether they exist at all, and also automatically update them or delete them. There are times when automatic update drivers for some reason does not work, most often occurs when using an unpopular brand.

If automatic driver updates do not help you, you can always download and install the drivers yourself. Thanks to the device manager, you can see the name of your headphones, after which you just need to find the official website of your headphone manufacturer, which will help you download without any obstacles necessary drivers. Remember that you need to remove old drivers, as this may cause problems when installing new ones. After installing the latest drivers for your sound device, it should work fine. But what to do if even after this nothing has changed?

Headphone check

If none of these methods helped to obtain sound or improve it, then most likely the problem is in the headphones themselves. There are a large number of different reasons why headphones may not work well; trying to find out why they work poorly is almost useless; first you need to check and make sure that the problem really lies in them.

If you have another device that your headphones fit into, then simply connect those headphones to that device. If the sound is bad, then your headphones are simply broken or some kind of malfunction has occurred. In this case, you will need to take the headphones to a service center or purchase new ones; of course, it would be best to buy new headphones, because if they break once, then there is a high probability that the same thing will happen a few months later after repair. You can always take your headphones to a service center, but it is best to do this only if they are really dear to you.

But what should you do if the headphones work well on another device, for example, on a laptop, while on the computer they produce poor sound? Naturally, in this case the problem is in the computer itself, but the reasons why this may happen, not so much. If you have done everything described above, that is, installed the drivers, checked the device for visibility of the headphones, adjusted the sound and connected them correctly to the connector, then there is a very high probability that the problem is in the sound card.

It is this card that is responsible for all the sound; you can always take it out and also take it to a service center, where it will be repaired almost in one day, because there are no problems or difficulties in fixing a sound card. Naturally, you can buy a new sound card. But, the sound card is the main problem in one case out of a hundred; most often the problem lies in the headphones themselves.

It is worth noting that not all devices support high volume, so before you try to make the volume high on your device, you should first test it on another device in order to know what the problem is.