OCZ SSD Drivers: Top Operating Systems. OCZ SSD Drivers: Top Operating Systems Automatic Download and Update Procedure

OCZ Toolbox- a utility for updating the firmware of a solid-state hard drive from the OCZ company. This utility is necessary for all users of such hard drives, since solid-state drives, unlike hdds, have their own firmware that needs to be updated. The fact is that the manufacturer of a given hard drive notices problems much later than a new one is released hard drive. Utility OCZ Toolbox automatically detects your hard drive and downloads new firmware from the Internet, if it is available, of course. We must warn you that updating the firmware is only possible on a disk that is not used as the main storage medium, i.e. it does not have an operating system installed. If you have only 1 solid-state drive, and it is used as the main drive, then you need to use boot disk with another system, for example, on Linux based. Also, before downloading and updating the firmware, it is recommended to copy all important data to another medium to prevent damage or possible deletion.

- Automatically detects your hard drive.
- Automatically searches for a firmware update for it.
- Convenient user interface.
- Low system requirements allow you to work with the program even on weak computers.
- High speed.
- The small size of the utility allows you to transfer it from one computer to another.
- Displays full information about your drive.
- Allows you to update the firmware for all hard drives of a given manufacturer.
- Allows you to update the firmware in just 2-3 clicks.
- The OCZ Toolbox program is distributed free of charge and without restrictions.

Disadvantages of the program

Procedure for manual download and update:

How to perform automatic download and update:

Recommendation: We highly recommend using a tool like DriverDoc if you are inexperienced in updating OCZ SSD device drivers. Our driver update utility will do everything necessary work, namely, it will automatically download and update necessary drivers O.C.Z.

The best part about using DriverDoc is that this utility performs automatic update not only SSD drivers, but also all other drivers on your PC. With a constantly updated database of over 2,150,000 drivers, you can rest assured that we have all the drivers you need for your PC.

Install optional products - DriverDoc (Solvusoft) | | | |

OCZ Update Frequently Asked Questions

What are OCZ SSD device drivers needed for?

Drivers are small programs, which ensure proper communication between the operating system and the OCZ SSD, acting as a means for “interoperation”.

What operating systems are compatible with OCZ drivers?

The latest OCZ drivers are supported by Windows.

How to update OCZ drivers?

The two main ways to update OCZ drivers are manually using Device Manager or automatically using driver update software.

What are the benefits and risks of updating OCZ drivers?

Installing the correct OCZ driver updates will improve performance, stability, and accessibility. new SSDs PC functions. The risks of installing the wrong SSD device drivers include reduced overall performance, feature incompatibility, and PC instability.

About the author: Jay Geater is the President and CEO of Solvusoft Corporation, a global software company focused on providing innovative utility software. He is a lifelong computer geek and loves everything related to computers, software, and new technology.

Getting more and more popular solid state drive(SSD). This is due to their constant reduction in price and, of course, more fast work with files. If you don’t go into details, an SSD is a kind of flash drive, only thanks to more advanced technologies, a much larger volume and much more high speed reading and writing. On at the moment replacement of traditional hard drive on an SSD will give a good performance boost (the most noticeable is the high performance with connecting SSD in SATAIII), in particular, the loading of the operating system will be many times faster, programs will open faster, files will be copied at a faster speed. But in order to experience the beauty of your SSD, the first thing you need to do is update the firmware on it. Why do you need to update the firmware? - you ask, in order to get rid of problems that the manufacturer noticed after the mass release of SSDs, and corrected them using new firmware.

In this article I will describe step by step the process of updating the firmware on an SSD OCZ Vertex 4, but for SSD OCZ Vertex 3, OCZ Agility 4, OCZ Agility 3, OCZ Vector, OCZ Vertex 3 Max IOPS, OCZ Vertex Plus R2 The firmware update process is absolutely identical.

To successfully update the firmware, you need to consider some factors:
1) Before updating the firmware of your SSD, you need to copy all the data that you may need to another drive. Most likely nothing will happen to them, but a failure is possible and you may lose all your data.

2) Connect SSD drive necessary as additional disk, and not the main one (on which the system is installed). It is also necessary to take into account that you will need a computer on which you can connect an SSD via SATA if you hope to update the firmware on your laptop/computer by connecting it using a SATA-USB adapter

I can disappoint you, with the help of these devices, nothing will work out, the program will not “see” your SSD, there will be an inscription No Supported Drivers Found.

3) To successfully flash your OCZ, SATA controller in the BIOS must be set to AHCI mode. In this regard, I would like to add that if you have Windows XP installed on your computer, you will not be able to update the firmware, because if you change the mode to AHCI, your system will give you blue screen, and according to the OCZ comrades themselves - Firmware update from toolbars not supported in Windows XP!!! In this case, you need to reinstall the system, say on Windows 7 (first selecting AHCI mode) and update the firmware.

4) To update the OCZ firmware, you will need an Internet connection.

If all conditions are met you need to download OCZ firmware update program (by going to the site, select your SSD from the list and download for it OCZ Toolbox).

Unzip the downloaded folder and run the file OCZToolbox.exe. The OCZ Toolbox v program will launch (version number). in it you will see your SSD drive. By clicking on it, with right side information about it will appear.

Clicking on the menu Tools, you will see the treasured button Update Firmware, click on it.

Important!!! During the firmware installation, provide the computer with uninterruptible power supply, or any external influence on it, if the computer is turned off or rebooted during a firmware update, this can lead to SSD failure.

A warning will appear informing you that you need to backup your data if you have transferred all the data from the SSD to another media, click "Yes."

The process of downloading the new firmware and installing it will begin, it will take literally a few seconds, after which a message will appear in the program Update completed successfully. Please power cycle yur drive.

After that, turn off the computer, remove the power from the SSD and connect it after a minute or two, after which turn on the computer. We launch the OCZ Toolbox program, check whether the firmware has been updated, if yours was very old firmware You may need to repeat the procedure to install the latest firmware (it is quite possible that the first firmware you installed was intermediate)

I hope this step by step instructions helped to update the firmware on your SSD no matter what, be it OCZ Vertex 4, OCZ Vertex 3, OCZ Agility 4, OCZ Agility 3, OCZ Vector, OCZ Vertex 3 Max IOPS or OCZ Vertex Plus R2. And you got a stable, high-speed SSD drive.

OCZ Toolbox is a utility especially designed to help you update the firmware version of your OCZ SSD drives when it comes out.

Supports a variety of SSD drives

It supports SATA III and SATA II drives such as Vector, Vertex, Agility and Solid Synapse Cache. Updating the firmware version for the SSD is always recommended as it brings you various fixes and performance enhancements.

OCZ Toolbox displays a comprehensive interface and is very easy to use. When you run the application it automatically identifies the SSD drive that is connected to your computer. After you select it, all the functions of the utility become active. Also, with the SSD highlighted, OCZ Toolbox displays information about the model, capacity, serial, current firmware version and WWN.

Be sure to make a backup before processing

For a successful firmware update, one click is all it takes. While it is not a constant occurrence, updating the SSD can result in losing all the data that is stored on the drive. The application prompts you of this before you can actually begin the update. This way you can cancel the process and create a backup for the drive.

After you confirm the update, OCZ Toolbox downloads the files it needs and when the update is finished, it notifies you that a system restart is needed for the changes to take effect. If you want to securely erase the data on your drive, the application offers you a feature that does just that. Moreover the utility provides you with detailed information about SSD attributes such as accumulated runtime bad blocks, power-on hours count and power cycle count.

To sum it up

In closing, OCZ Toolbox is the right tool you need and should use when it comes to easily and quickly updating the firmware version of your OCZ solid state drive.