How to install Windows 7 yourself without a disk. Reinstalling Windows without a disk or flash drive
To install Windows 7 on computers that do not support a disk drive (for example, netbooks), you can use a flash drive, the volume of which must exceed 4 GB to completely accommodate all the distribution files necessary for correct installation and subsequent operation of the system.
Before installing Windows 7, you will need to download an image operating system. This can be done both on the official Microsoft mirror and on third-party resources. After downloading the image, you will need to install a program that will allow you to format the flash drive in required format and record all files in the image. Among the most convenient programs For Windows entries 7 can be noted Windows 7 USB/DVD Download Tool. The program is available on the official Microsoft website and allows you to write a licensed image to removable media.
Flash drive recording
Insert the USB flash drive into the device and run Windows 7 USB/DVD Download Tool. A simple program interface will appear in front of you, through which the already downloaded image is recorded. Click on the “Browse” button and specify the path to ISO file the system image you downloaded earlier. Once selected, click "Open".
After specifying the path to the image, click on the Next button to proceed to writing the image to removable media. In the next menu, select USB Device. In the list provided, select the name of your flash drive, and then click Begin copying. Next, click Erase USB Device, and then confirm the information. After this, recording the image to the USB flash drive will begin, the process of which you can monitor in the main program window. Once the record status line is 100% full, you will see the Backup Completed message. The image recording is complete and you can begin installing the system.
Actions after recording
Before reinstalling the system, save all important files on separate media, as documents may be deleted during the installation process. After that go to Computer BIOS by pressing the Start Setup key (F2 or F4) when the computer boots. Go to the Boot section and select as First Boot Device the name of your flash drive. Save your changes and restart your computer. If the image was recorded correctly and BIOS settings were specified correctly, installation and initial configuration of the operating system will begin.
This distribution has been tested by me personally. It is absolutely stable and the most important thing is that it is not an assembly, but an absolutely clean copy. If your computer won't boot, reinstalling the operating system will most likely help you.
Naturally, you will need to activate Windows. There are many different activators, but I think Windows Loader is one of the best.
It is free and allows you to receive official updates from Microsoft. First, you need to download UltraISO to write the original Windows 7 maximum image to a flash drive. You can download everything you need from our website via torrent.
To install Windows 7 Ultimate you will need:
1.Download the original, clean image from our website
2. — this software will allow you to write an image from window to a flash drive or a good old disk.
3. DriverPack Solution - allows you to download everything quickly and for free necessary drivers.
4. Windows Loader - an activator that will allow you to use the OS for free with full functionality.
4.Windows 7 Download Tool - .
5. The actual flash drive or disk itself, with the required amount of available space.
What is the difference between the x64 and x86(x32) versions?
It's very simple. If your PC/laptop has more than 4 gigabytes RAM, feel free to install x64, if less, then x86.
You can find out the number of OPs like this:
1. Go to “My Computer”
2. Click right click mouse, in any free place.
3. Click Properties
"(my laptop data)
How to install Microsoft Windows:
- First you need to do bootable USB flash drive. About this.
- Turn on the computer/laptop in launch mode from a flash drive. .
- Follow the instructions on the screen.
- Activate Windows when Windows Help Loader.
- Download all the necessary drivers and programs using DriverPack Solution or Snappy Driver Installer. There should be no problems during installation.
Important!!!
You must understand that when changing the operating system (window), you need to format drive C. Therefore, make sure in advance that there are no necessary files(photos, videos, programs). Also make sure that your computer has at least 2 gigabytes of RAM, they are needed for stable operation of the system. How to do this is indicated above in this article.
Installing or reinstalling Windows is a fairly simple and automated operation, however, only if you have a working disk drive or at least a flash drive with recorded Windows image XP, 7 or desired version. Reinstallation can be more problematic, especially when you need to save data. And if there is no disk or flash drive, how can you install and reinstall in this case? Our article will describe in detail how to reinstall the working Windows version 7 without using a disk or flash drive.
Brief description
The operation itself is quite simple, and for an experienced user the introductory words will suffice. Let's break the process into several stages:
- Compression hard drive and allocating the required amount of memory.
- Copying data from the OS image to a previously prepared memory area.
- Creating an installation disk, which is located inside the selected memory area using the EasyBSD utility.
- Installing Windows OS, as well as its configuration.
These factors will be described in more detail below, so that any user will be able to figure out how and what to do.
Downloading the necessary utilities
For this you will need the Daemon Tools program. You can download it from the official website. It takes up little space on your hard drive and is also not demanding on resources. You should also download an even smaller utility called EasyBSD. It can also be downloaded from the official website. It is with the help of the latter that we will carry out the entire operation of reinstalling and installing Windows without a flash drive or disk.
Preparing a partition for installation files
Create a section
The first step is to install a partition on the disk where the files will be stored. installation files operating room Windows systems. To do this you need to go to “ Disk Management" To get to this submenu, you need to right-click on “ My Computer", there select the tab " Control", and it contains " Disk Management" You can also enter “ Disk Management» and you will immediately be taken to the desired page. There you can also track the amount of memory on a flash drive or other devices. The option we need looks like this:
Here you can see the amount of available and busy information on the hard drive. It is important for our operation that hard drive was already divided into two sections, as in the picture. After fulfilling this factor, we divide the second disk (in our case D) into two different sections. To do this, right-click on drive D, and there select the tab “ Shrink Volume" After clicking, a window pops up asking you to enter how much to compress the disk. You need to enter a value slightly larger than the size of the Windows image. Although there is often enough memory for laptops, in order to save enter megabytes 150–300 more, than the image weighs. Click " Compress" The compression itself will not last long - about five minutes, no more.
Converting a Partition
After that, we need to convert the space we just shrunk into a clean partition. By right-clicking on the rectangle indicating unallocated space, select the “ tab Create a simple volume" It looks something like this:
The wizard will start. Without much thought, we click on the Next button everywhere, there is nothing particularly important in it. After creating the volume, we proceed to the main part of the work.
Copying installation data
Opening Daemon Tools Lite or another version available on your laptop, select the image with Windows 7 or 8. The next step is to click on the “ tab Add Image" After it appears in our program, click on “ Mount" A screenshot of this operation is shown below.
From the virtual drive we copy all the data, including folders and files, to a small disk that we created about 10 minutes ago. You can find out the name of the disk by looking at the letter located under the button panel.
Creating a virtual disk
The next step will be to work with the latest utility, which is called EasyBCD. After starting the program, click on Add entry. Among several tabs, select WinPE. In the name field you need to enter the name of the section we created. By default, in all laptops that have Windows installed, it is called " New Volume" So we write in the “Name” category. Let there be a file in “Path” boot.wim which is in the folder sources inside the image.
Windows installation
After completing the entire operation, click on the button Current settings. With its help, you can make sure that your actions were not in vain. If new entry appeared: congratulations, you have completed all the work yourself. As you can see, installing or reinstalling Windows without a disk and without a flash drive is very simple! After restarting your computer or laptop in special menu selecting the operating system, select " New Volume"and start the standard process of installing or reinstalling Windows.
Features for Windows XP
It is worth noting that installing Windows XP is a little different. The process itself has changed significantly and more data is required from the user. Therefore, there are problems with Windows XP when they try to install it not from a disk. This technique allows Windows installation 7.8, but does not provide the ability to install XP due to the absence of some data, for example the file boot.wim, which is needed for one of the most important installation processes. If you want to install Windows XP, then you need a slightly different reinstallation method. One of the simplest is system update. However, reinstalling XP using this method will only update the system and will not install another OS.
Reinstalling XP from your hard drive will allow you to perform an operation that is similar to the previous one. The difference between them is that the latter option will help even when the system does not boot.
First you need transfer the distribution folder to your hard drive.
After this, we do not need to update the system, but install it completely again by selecting " New installation » in installation mode. The next step will be data collection and general installation Windows XP OS in the usual version - as from a disk. Your OS will be in the folder windows.0, however it can be renamed.
Video on the topic
How about without a disk? This topic is relevant today. Moreover, it concerns the new OS developments that appeared not so long ago. And now in more detail! Windows 7, or simply “seven,” is one of the latest operating systems from Microsoft, and at the same time the most successful of them. At least that's what many experts think.
What does installing from a boot drive mean?
7 without disk? The standard model for installing any operating system is from a hard drive. And in addition to a disk, a drive can be used as it. The installation option from a flash drive is quite reliable. As with a disk, the host system is installed at a lower level in the computer's software hierarchy. In other words, "from under the old system." In addition, this method of loading a new operating system allows you to format the hard drive on which the previous system was located. This will protect the OS from old programs that may be malicious, as well as from “under-deleted” parts of files that are invisible at first glance, but remain in the system and interfere with its normal operation. Such “scraps” of unnecessary documents hinder the speed of the system. Malfunctions may occur. You should consider how to reinstall Windows 7 without a disk and without a flash drive.
If there is neither a flash drive nor a disk
The standard installation method is not always possible. For example, if there is no disk, but there is an OS file on the computer or laptop itself. What to do in such a situation? How to reinstall Windows 7 without a disk or flash drive on a computer? The system file can be presented in the form of an image, an archive, or simply an installer. To install the system from an image, you should run special program. It is necessary for reading/writing exactly this kind of formats. For example, Daemon Tools. Having launched the image in the program and mounted it, you should select the installation file. If the OS is available as an archive, then there is no need to unpack it. How to reinstall Windows 7 without a disk or flash drive on a computer in such a situation? Click on the archive and select the installer file in It has “.exe” permission. This file is located mainly towards the end of the list of archive contents. There will be no difference in launching the installer even if the operating system is simply located in some folder.
What do you need to remember?
If you are installing a production system for the first time, there are some rules to keep in mind. You need to know them if you need to answer the question of how to reinstall Windows 7. Whether this will be done without a disk or with it does not play an important role.
Firstly, the installation of a new OS may occur due to the computer being infected with viruses. This is a useless process if it is not accompanied by formatting. The fact is that infected files with this type of installation working environment don't disappear anywhere. They are saved in the previous installed system. Subsequently, they will simply switch to a new shell.
Secondly, the best, and most importantly, the most in a safe way The installation will still use hard media. Reinstalling Windows 7 without a disk in such a situation is not difficult. It is enough to have a bootable USB flash drive. If it does not exist, then it is created using simple actions. There is a program specifically for this that writes images to media. For example, Ultra ISO. Accordingly, if the files are not in disk image format, you should create one. Usually the same Daemon Tools is used for this.
How to reinstall Windows 7 without a disk on a laptop or computer? It should be remembered that when installing a new system, you should always use only verified files. The fact is that with modern progress, handicraft assemblies are found everywhere. When downloading Windows 7 from the Internet, no one can say with confidence that it is not “hardwired” with malicious software. software.
First actions
How to reinstall Windows 7 without a disk on a laptop or computer? Let's look at how to do it the most in a simple way. Find the folder with the operating system, launch it. After this, the installation window will open. It will display the ability to configure the following parameters:
- selecting the system language (this is the language of the displayed names of folders, files, disks, and so on);
- keyboard layout (input language);
- time format (country, time zone).
For our country, naturally, you should choose the Russian language option everywhere.
After clicking the "Next" button, a window with the "Install" button opens. By clicking on the installation, go to Accept it by checking the box next to the appropriate inscription.
The most popular types of systems
The installer may contain several system options. The most commonly used:
- home - for an inexperienced user;
- standard - for those who confidently work with a computer;
- professional - for an experienced person; it offers extensive capabilities, necessary modules and great access to files;
- maximum - provides full access to all functionality of the operating system.
If you are wondering how to reinstall Windows 7 without a disk or flash drive on a laptop or computer, then you should understand that this is an incomplete list of possible systems.
Don't forget about the bit depth
All programs of this type differ in their bit depth, that is, 32-bit (X86) and 64-bit (X64). This parameter is indicated after the system name. For example, Windows 7 Ultimate X86.
The choice of the level of the system to be installed should be made based on the power of the computer's resources. If the laptop or PC is relatively weak, it is recommended to install X86 OS (32-bit version). It is best to install Windows 7 X64 if the RAM size exceeds 4GB. The thing is that the 32-bit version is simply unable to “see” such a volume.
What to do when formatting is needed?
Let's get back to how to reinstall Windows 7 without a disk. The next OS installer window will offer the option to complete it on your computer and update. You must opt for a full installation. IN otherwise Only an update to the pre-existing operating system will occur.
After selecting the preliminary parameters, a window appears with the option hard choice disk. This method will not allow you to format it. This is due to the fact that the installer was launched from a running system. If it is necessary to format the disk, which is desirable when installing the OS, then this point can be bypassed. This happens as follows. Until the new “seven” is installed, take any other partition of the disk and clear it of files (move them if you need them, and just don’t touch them if you don’t need them). After that, format the partition. You should not change the drive letter in this situation. When answering the question of how to reinstall Windows 7 without a disk or flash drive on a laptop or computer, you should keep in mind that when you boot the new system, the drive letters will change automatically. The formatted partition should be selected for system installation.
If cleaning is not needed
If formatting is not necessary, you can simply select the drive to install the new system and continue. In such a situation, the old system will remain in the "Windows old" folder. It will be located on drive "C". It will also be possible to start and work from it. But it is not recommended to do this, since two identical operating systems on the same disk may “conflict”. This, in turn, will lead to a malfunction. The old OS can be removed or moved to another medium. There is another very significant point that you should remember when answering the question of how to reinstall Windows 7 without a disk on Asus laptop, Lenovo, HP, etc.
If the partition on which the new OS is installed does not have enough space for two operating systems, the installation process will not be able to start. This occurs due to the fact that the old shell is not removed and continues to occupy space. It is important to remember that frequent reinstallation of the operating system leads to disk destruction. This can be avoided by using various types defragmenters. For example, the Victoria program.
This problem is not so bad for computers. Nothing is easier than buying new hard disk and install it. This is easy to do yourself. However, if the hard drive breaks on a laptop, then, in addition to the cost of the disk itself, you will have to pay for repair services. You should know about this if you are interested in the question of how to reinstall Windows 7 without a disk from a flash drive.
What do you need to enter after installation?
Having selected the disk (partition) for installation, click “Next”, which will lead to unpacking and subsequent installation new Windows 7. This process is fully automated. It will last for 25-30 minutes, depending on the power of the computer (laptop). After completing the installation, you need to enter the following parameters:
- Username (your own name or a desired nickname).
- Computer name (any name in Latin or Russian letters).
If the input is incorrect, the system will tell you about it and ask you to correct the symbols, indicating the error.
Entering the password and key
During installation, you will be asked to assign a password and a hint in case you lose it. After this, a window appears in which you must enter the key to activate the operating system. If it is missing, simply click “Next” after unchecking the box next to “Activation while connected to the Internet.” Then you will be able to activate the system in any convenient way. This is done as follows:
- You need to find the "My Computer" folder.
- You need to open it by clicking the right mouse button.
- You need to click on the "Properties" tab.
- You should select the “Change product key” option.
It is necessary to protect your computer from external threats
Let's return to the question of how to reinstall Windows 7 without a disk on a computer or laptop. The next step is the security settings. You can use the recommended service, or you can postpone the decision and configure it later. Computer protection is one of the most important moments in installing the operating system. The fact is that the security of the equipment will depend on how well you limit access parameters from other people’s devices. This menu- nothing more than offering a choice of a data protection set created by Microsoft specialists. It should be understood that they already provide and set the recommended parameters. By skipping this point, many people forget to perform the configuration manually in the future, putting their files at risk.
So, having decided on security, click “Next” and set up the time and date (time zone, etc.) in a new window.
Next, the installer displays the network parameters window. It can be either home or public. Due to this, the settings in the Internet properties are changed. As for the general understanding, then home network looks more conservative regarding the configuration. Community Network, on the contrary, provides greater access to the resources of a laptop or computer.
What can be changed after installation?
It was last step, after which you will receive an almost empty desktop of the newly installed Windows 7 operating system. Basic settings (for example, adding the “My Computer” folder or user files to the desktop) can be done by left-clicking on the desktop space and selecting the “Personalization” tab ".
There you can also set a different background image, change the default theme (usually Windows 7 Aero), change the screen resolution, and much more.
Standard licensed Windows 7 goes without additional programs. However, among the numerous assemblies you can find options that include many additional elements, software, and so on.
Conclusion
This article described how to reinstall Windows 7 without a disk or flash drive. You will install it on the computer - it does not play a big role. The principle of the installation process for a new system is the same.
Installing the operating system today does not cause any difficulties even for inexperienced users, provided they have the necessary media. However, there are situations when it is impossible to use either a disk or a flash drive to perform this operation. In this article, we will provide instructions on how to reinstall Windows 7 without using physical installation media.
In order to carry out this procedure, you need to acquire two programs and an image with the “seven” distribution kit. We will talk about where to find the necessary software below, and the image can be obtained by entering search engine request like "download Windows 7".
Please note that all actions must be performed from account with administrator rights.
Step 1: Download and install programs
To work, we will need two programs - Daemon Tools Lite and EasyBCD. The first is needed in order to mount the image and copy files from it, and the second is needed to create boot entry. You can read in detail about the first program and download it to your PC on our website.
We need a free version. To receive it after going to the official website, click "Download" in the corresponding block.
At one stage, the installer will once again ask you to decide on the version.
Otherwise the installation is quite standard, but with the advent dialog boxes with a proposal to install drivers. We agree everywhere.
The following program also has a free edition. To download it, you need to go to the page using the link below, scroll down and click the button "Register".
After the software has been downloaded and installed, you should launch it and select the interface language. You only need to do this once.
Step 2: Preparing the Disk
To continue the operation we will need to create a system disk a small section for copying installer files.
- Right-click on the shortcut "Computer" on the desktop and select "Control".
- Let's go to "Disk Management", select the system volume (usually “C”), right-click on it and proceed to compression.
- At this stage, you need to determine the size of the image so that it fits in new section. We find it, right-click and go to "Properties".
We look at how much space the file takes up on the disk and, to be sure, add 500 megabytes to this value.
- In the window "Compress C" in the field "Size of compressible space" write the resulting number and press "Compress".
- Now disk 0 has unallocated space of the required size. Right-click on it again and select "Create Simple Volume".
- In the window "Masters" let's move on.
- Leave the size as is.
- We also do not change the letter.
- For convenience, we assign a label to that, for example, "Install".
- Click "Ready", after which the partition will be created.
Step 3: Copy Files
Step 4: Create a boot entry
- Launch the EasyBCD program and go to the tab "Add entry". In the block “Removable/external storage” select a section "WinPE". In the field "Name" we write "Install"(here you can set any name: this will be the name of the item in the boot menu).
- Click the review button shown in the screenshot.
We go to the previously created partition (not to the drive with the mounted image, this is important), go to the folder "sources" and select the file boot.wim. Click "Open".
- We make sure that the path is correct and press the green button with a plus.
- Let's go to the tab "Current menu" and see our new entry.
Step 5: Installation
The procedure for installing the operating system using this method is slightly different from the standard one.
- Reboot the machine and use the arrows to select the installer in boot menu. In our case it is "Install". Click ENTER.
- Setting up the language.
- We start the process with the corresponding button.
- We accept the terms of the license agreement.
- Select the full installation.
- In the next window click "Disk Setup".
- We select sections one by one, except "Install", and press "Delete".
Confirm the operation with the button OK.
- As a result, only our section with the installer will remain and "Unallocated disk space 0". Select it and click "Next".
- The system installation procedure will begin.
Further actions will be similar to the standard installation. They are described in the article at the link below (from paragraph “Stage 3: Initial system setup”).
Conclusion
As a result, we get a pristine “seven”. Don't forget that it needs to install important updates for optimization, support for new programs and security.
We learned how to reinstall Windows without using physical storage devices - disks or flash drives. This skill will help you complete the procedure in cases where for some reason (virus attack or malfunction) it is not possible to connect removable media. The main condition for a successful operation is care during preparation. Don’t get confused about where to “load” from boot.wim into the EasyBCD program: this must be a created partition, not a drive with a Windows image.
