How to change the router password. An easy way to change the password on a WIFI router

Home / Technologies

A Wi-Fi router provides devices (smartphones, laptops, computers) connected to it with a local network and the Internet. If after installing the router you have not set a password for your Wi-Fi network, then the network is public and anyone within the network’s range can connect to it. Thus, your neighbors or employees of neighboring offices at work can connect to your network and use it, which will lead to losses in Internet speed.

If you already have a password, but someone found it out, then you have no choice but to change the password on your Wi-Fi router to stop the free distribution of your Internet. In this article you will learn how to change the password for all popular Wi-Fi router X.

Procedure for changing the password on the router

As a rule, the configuration of the router and its installation are carried out by people from the provider. However, after some time the user may experience the following problems:
1. The data transfer speed begins to drop significantly.
2. Even when no one in the house is using the wireless network, the WiFi network indicator lights are still blinking.
3. If the provider charges for the amount of information transferred in excess of the norm, there is a constant debt on the account, which some attribute to their inattention at first.

All these cases indicate only one thing - someone unknown was able to connect to WiFi by guessing or hacking the password. If the password is not set, then there is no need to even guess.

The way out of this situation is to change the password to a more complex combination. At the same time, we note that hacking a password from a WiFi network is quite difficult. Therefore, often the cause of problems is the human factor - someone you know, when they were at your home, asked for a password to connect their device, and then told others about it (it’s worth remembering that all devices save passwords for WiFi networks). How to change the password on the router and how to make the network more secure?

When considering the issue of changing the WiFi password, for example, from the Rostelecom provider, you should understand that providers do not produce network routers, but only enter into an agreement for their supply to their customers with various manufacturers. Install New Password is possible on all network routers, but the change process depends on the characteristics of the router itself.

Provider Rostelecom provides its services with the installation of the following network routers:
1. D-Link.
2. TP-Link.
3. HUAWEI.
We will also look at the process of changing the password for routers from other manufacturers.

Changing the Wi-Fi password on a D-Link router

Despite the fact that you can find a huge number of router models on the market from the manufacturer D-Link, you can set or change the WiFi password using the same recommendation. This is due to the fact that the software part of the system remains unchanged, and the models differ only in their characteristics.

The differences may be minor, often affecting only the design and location of menu items.

One of the most popular models from the world famous manufacturer D-Link is the DVG-5402SP. The Rostelecom provider also allows you to install this model. The password change process can be divided into the following stages:

1. Launch any browser, for example Mozzila Firefox or Google Chrome.

2. The model in question has a non-standard router address that you should go to to display the settings panel - https://192.168.8.254. You can most often change the password and set other settings in other models of this manufacturer by going to https://192.168.0.1 or https://192.168.1.1. Setting up a WiFi network occurs through a browser. After going to the browser address, the router panel should open.

3. In order to change operating modes, go to the “Settings” section.

4. As a rule, on the left side there is a menu with various parameters. Find “Wireless Setup” (installing a wireless network) and go to it.

5. In this section there is a security category called “Wireless Security”. Here you can set all security settings.
6. Go to the “Pre-shared key” parameter (PSK encryption key), set the desired password and click OK. Confirm the changes by clicking the “Apply” button.

7. In order to change the value and save it, open the “Maintenance” maintenance section, go to the save and reboot category and click the “Reboot” reboot button.

After the system reboots, the password will be changed to a new one; to connect from other devices via WiFi, you will need to delete old point access, scan wireless networks and reconnect, for which you will have to enter a new password.

Changing the Wi-Fi password on a TP-Link router

Routers under the TP-Link brand have also gained great popularity in Russia. One of the most common models is the TL-WR841ND, which I already talked about earlier in the article about setting up this router.

In this case, you can configure WiFi operation as follows:
1. Open the browser.
2. Enter the address in the address bar home network, which for this model is https://192.168.0.1. Afterwards we enter the input to go to the entered address.
3. B in this case A window for entering your password and login will appear. For most models, the default login and password are the same - “admin”. If the system does not accept such data, you should reset all settings to factory settings by pressing a special button on the case.

4. After logging in, go to the section wireless connection and security (“Wireless”, “Wireless security”).

5. In the WiFi security section there is a section reserved for the password. The field is called "PSK Password". You should enter a new value in this field and click save.

After the router reboots, the changes will take effect.

The two routers discussed above are most often found in stock from the Rostelecom provider. However, in some cases the client wishes to purchase their own equipment from other manufacturers.

Changing Wi-Fi password on a Huawei router

1.Go to the router control panel by going to https://192.168.100.1 and enter your username and password. On a Huawei router, the default login is usually telecomadmin and the password is admintelecom. It is also possible to login as root and password as admin.

2.After you have entered the control panel, go to the WLAN tab. You need to specify the SSID Name (the name of your Wi-Fi connections) and WPA PSK password. After making changes, you must click Apply.

Changing the Wi-Fi password on an ASUS router

1.Open any browser and go to https://192.168.1.1. Specify Admin as the login, and Admin as the password.

2. In the left menu, go to setting " Wireless network».

3. Enter the name of your Wi-Fi network in the SSID field, and in the “authentication method” item - WPA2-Personal. This is the most secure method on at the moment. In the WPA Pre-Shared Key field, enter the new password for the network and click Apply.

Changing the Wi-Fi password on the ZyXEL router

1. Go to https://192.168.1.1. This address is applicable in almost all cases. Only some models have a different home network address; you can find it on the back of the router itself.
2. Next you will see the login panel or the menu itself. If the login panel is the password and login “admin”. If this value is not suitable, we reset the settings to factory settings using a special key on the router case.
3. In the router control panel, go to the menu “ Wi-Fi network", "Security" select WPA2-PSK security and enter a new value and click apply.

4. After this, you should reboot the router for the changes to take effect. It is also important not to forget to click on the save button before carrying out the reboot process. Otherwise, you will have to repeat the process again. In some cases, it is recommended to reboot the router itself, not through the virtual panel, but through the button on the device body.

If devices cannot connect to the network

After changing the password, a situation often occurs when it is no longer possible to connect to the created network. The problem is that the login information has changed, and all devices are trying to connect using the old parameters. At the same time, some devices begin to slow down, produce strange errors, and see the network under a different name even in a situation where this data was left.
The way out of the situation is quite simple - you should delete the network on all devices, and then search for access points again and connect using a new password. All problems will immediately disappear and the device will work stably again.

Nowadays, almost every home has a computer connected to World Wide Web. Access to the Internet from an entertainment function quickly turned into an everyday necessity for solving both household issues and tasks related to the professional activities of the PC owner. Often in the house, in addition to the computer, there are gadgets that support Wi-Fi, and it is absolutely not advisable to run the provider’s cable to each device.

The best option is to install a WiFi router that will provide Internet distribution (routing) to all the user’s existing devices. But after the purchase, you also need to correctly configure the WiFi router to organize an access point to the wireless network.

This guide details all the necessary instructions on how to set up WiFi router and what should be done to correct settings WiFi wireless network. Detailed step by step instructions accompanied by explanatory drawings, will allow you to quickly and correctly produce WiFi settings even a novice user can do it completely independently, without resorting to paid assistance from specialists.

Preliminary and preparatory actions

Before you start setting up your WiFi router, you need to complete several preparatory steps. For detailed description of the steps performed in the instructions, TP-Link equipment will be used as an example, since according to the results of statistical studies, their models are now the most common among users in the Russian Federation.

First, you should decide on the optimal location of the wireless network access point in your home or office, connect it and do a little analysis of whether the device is functioning correctly.

Device connection procedure

It is not recommended to install the Internet distribution device in the farthest corner room of the home, and it is also undesirable to place it behind system unit computer, as this will greatly affect the quality and strength of the wireless signal. The optimal location is the center of the apartment or office with maximum elimination of barriers to the propagation of the WiFi signal, which will allow achieving a greater range of the created WiFi network.

Typically, the router body has the following keys and sockets for connecting wires:

To connect the router to a desktop PC or laptop, you will need to complete the following few steps:

How to configure a PC to work correctly with the router?

You will need to take the following several sequential steps:

Open "Control Panel" and then go to the " Network connections" - for computers running Windows XP, and for more modern operating systems, go to the "Network and Management" tab or to the "Network and Sharing Center";
In the list of connections call context menu from "Connection by local network" and then click on the line "Properties";
In the menu that appears, analyze the “Internet Protocol TCP/IP” section, where you need to check the boxes for assigning IP and DNS in automatic mode. It is not common, but it happens that the provider requires you to manually specify these addresses, in which case you just need to enter them, copying them from the contract with the communication service provider;
Ready!

Setting up a WiFi adapter

This is exactly what small device Allows your computer to connect to a wireless network. Modern laptops almost always have a Wi-Fi adapter built-in. If the computer does not have this device, then the problem is easily solved by purchasing it and installing it either in a USB port, if the adapter is an external type, or by installing the bracket in the corresponding slot inside the system unit.

To configure the correct operation of the device, for example, on a PC with Windows 7, you will need to take the following steps:

Through the “Control Panel”, launch the “Network and Sharing Center” window;
Then go to “Change adapter settings”;
In the next window that appears, open the “Network Connections” menu;
In the list of connections, call the context menu from wireless connection and click on the line “Properties”;
Next, select “Internet Protocol TCP/IP v4” and click “Properties”;
Check the box “Receive automatically”;
Click “Ok”;
Ready! Now we can move on to the question of how to set up a wireless WiFi router.

How to launch the settings entry interface?

After completing all the preliminary steps, you can immediately begin to solve the problem of how to properly configure a WiFi router. To do this, you need to launch any Internet browser on a computer or laptop connected with a patch cord to the router.

The sequence of actions algorithm consists of the following stages:

Firmware update

Despite the fact that the purchased device, as a rule, is already configured and has factory firmware, before setting up Wi-Fi and starting to enter the parameters of the network being created, it is advisable to flash the device, providing the device with the latest software modification.

This will avoid most of the future failures and provide a higher degree of protection for the created Wi-Fi network.

The firmware is available for download on the official website of the equipment manufacturer. After saving the archive with the software on your computer, you will need to unpack it and remember well the location in the PC memory of the firmware file. Then you need to carry out the following steps:

In the router interface, go to the “System Tools” section;
Next, go to the “Firmware Upgrade” tab;
Click on “Browse...” and indicate the location in the PC memory where the file is saved new firmware, then click “Update”;
Wait until the process completes and automatic reboot device.

Settings

Once the device restarts, you need to restart the interface and take the following steps:

Enter the “System Tools” tab;
Go to the “Password” subsection, where you specify your self-created login and password to change settings;
In the “Network” tab, go to the “WAN” tab and indicate the type of connection, which you need to find out from your Internet provider, but in the vast majority of cases, dynamic IP is used.

Determining the type of connection

It is specified in the contract with the provider, but if it is missing, you can find out from the official Internet resource of the communication service provider.

Entering wireless network settings

You just need to follow a couple of steps:

Enter the “Wireless” tab;
Check the box “Enable” and “Wireless Network Name” or “SSID” and come up with a login yourself, a complex code for the created WiFi network, it is recommended to select the encryption type “WPA/WPA2”.

MAC address

It is rare, but it happens that the communication provider requires a connection wireless point To network card computer. The MAC address must be copied into the router parameters by clicking the “Clone MAC” button in the menu.

After this, you must save the changes by clicking “Save” and reboot the device.

Wi-fi has long and firmly become a part of the lives of many city residents. Many people can no longer imagine visiting a public place, such as a cafe, without the ability to connect to the Internet. Naturally, there is a desire to have wireless access to the network at home. This is very convenient, but there is a possibility of encountering a typical situation that, one way or another, probably everyone faces - you need to connect a new device to the Internet, but you have forgotten the password for the router. Fortunately, this problem can be solved.

Content:

How to find out the password for your Wi-Fi router if you have forgotten it?

To go through the recovery process Wi-fi password, you will need one computer previously connected to it.

Right-click on the icon with the connected Wi-Fi in the right, next to the clock, bottom corner of the monitor and select “Network and Sharing Center” from the items that appear.
In the window that appears, you need to select “Wireless Network Management”.
When you see another window appear, on the required connection you need to click again right click your mouse and select “Properties” there.
Inside the "Security" tab, in the column called "Network Security Key" you will find hidden password. To see it, you need to check the box “Display entered characters”, and it will immediately become visible to you.

If there is not a single computer already connected to the network, then you need to find out the password using the router itself.

Connect the router to your computer using the included power cord.
In the address bar of any browser you need to type the following address - . Next, you will need to fill in the fields with your login and password, which will allow you to access the settings. With a high degree of probability, this is admin/admin.
Next, you need to go to the following tabs - Wireless and Wireless Security. In the column called PSK Password: (PSK Password:) you will see your password. Perhaps it will be indicated in some other column in the same section. If you have a router from Asus, then you will see the password immediately on the first page.

Standard router and router passwords

By default, in most cases, the login “admin” and a similar password “admin” will be set on your router. But in some models the situation is different. For example, in the D-Link DI-804 model the password field will need to be left blank with the same login, and in the Zyxel Prestige 650 model the login and password will be the set of numbers “1234”.

By the way, if the above passwords do not work, it means they have already changed them before you, the most popular passwords, try them.

How to reset the password from the router to the standard/factory one?

If you don't remember your router login and password, try entering the factory ones. If they don't fit, you'll have to reset. It's very easy to do. On each router you will find a small button, usually next to the power button, which you need to press with something sharp (since it is very small) and hold for about 10 seconds.
After this, all logins/passwords/settings will be reset to factory settings and you can use your router. But keep in mind that you will have to re-enter all the settings that were made earlier.

Did you find out the password for your Wi-Fi router? Don't forget to take a look and enjoy it for free!

How to change the password of a wifi router?

For this procedure, you need to connect the router to your computer using the cable that comes with it.

Launch your favorite browser and type ;
Type your username and password in the appropriate boxes to begin setting up the router in the appropriate section;
Go to the Wireless section and then - Wireless Security;
Check the WPA/WPA2 box;
Set the following settings: Version should be set to WPA2-PSK, and Encryption should be set to Automatic;
In the column called PSK Password, enter your new (changed) wifi password and click Save;
After the router asks to reboot, click OK;
In the red inscription that appears, click on the blue phrase “click here”, and the process of changing the password will be completed.

3 more useful articles:

Forgot your wi-fi password in your apartment or in your favorite cafeteria/restaurant/hookah bar? If you have previously...

The Sidejacking utility is translated from English as “Left Connection” and uses a classic version of the attack called…

The 21st century is the era of digital technologies, which change and improve every year. The Internet penetrates our lives at incredible speed, which is what scammers take advantage of. In addition, it is possible that your neighbors could also connect to your Wi-Fi and are using it for their needs. To ensure that your computer is always protected, you need to change the password for your Wi-Fi router from time to time. How to do this?

Important! How to make it the safest? Do not write a password that is too simple; the recommended length is eight or more characters; To prevent attackers from finding the desired combination, use a combination of numbers and letters (capital and uppercase), for example: rpUk1B5y9; name/date of birth/any other personal information should not be used as a password; use a special generator that can be easily found on the Internet if you have difficulty coming up with a password.

Step 1. Connect the router to your computer

Connect the cable from the router to your computer or laptop, as shown in the photo below, or simply access any browser via Wi-Fi, but the first option is more reliable.
Take your router and find the IP address (192.168.1.1/192.168.0.1 in most cases). The IP address, username and password can be easily found by looking at reverse side device, as well as in the instructions for the device.
If you have already changed your password but cannot remember it, you need to reset your settings to return to the default settings. To do this, find “Reset” on the device and hold it for some time (10 seconds).
If you have problems finding the IP address, click on the Start menu. Type “cmd” in the search bar and click Enter.
IN command line enter the word “ipconfig”, then the line “default gateway” will appear, where the IP address will appear.
Log in to your browser (Google Chrome, Yandex, Opera or any other browser installed on your computer), enter these numbers in the address bar and press Enter.

Step 2. Enter the “Settings” of the router

A window will appear in which you need to enter (if you used the first method of searching for an IP address, then you already know this data). If you have not changed your password before, then you need to type “admin” in both fields, i.e. standard parameters. If you have already changed the password, then enter your version (if you don’t remember it, then return to step 1 and reset the settings).

Step 3: Change your password

Remember that for complete security of your computer, the password should be changed from time to time (preferably once every 1-2 months), and do not forget to write down the new password.

Attention! If, after changing the password, problems arise with the connection, a window appears with the message “error”, then you need to delete the connection to your Wi-Fi, connect again and enter a new password.

You can also watch a video to learn more about the process of changing your password.