How to create a server using the program. Creating a Minecraft Server

The principle of creating a local network in any Windows versions(XP, 7, 8, 10) practically nothing no different. Exceptions are complex multi-level corporate networks, where several subnets, proxy servers and VPN are used.

But in this article we will look at how to create home network without resorting to purchasing expensive equipment, but using a regular switch or router with Wi-Fi support.

What is needed to create a network

First of all, to create a local network from a certain number of computers, we need equipment:

Please note: If a direct connection will be used (i.e. twisted pair insert into both devices without using a router), then you will need not a standard cable, but cross— over, except when modern network cards with MDI-X support are installed. In this case, you can use the standard crimping method.

How to create a local network

Now let's proceed directly to creation. First we need to prepare:

• Install all equipment in its place - computers, routers, etc.
• We crimp cable, if necessary.
• Let's do wiring, i.e. we extend the twisted pair to the equipment.
• Connecting twisted pair equipment.

Costs pay attention, that when the connection is made and all devices are started, the connection connectors on the computers should shine. The same applies to routers with routers, only they have light bulbs located on front panel. If any light is off, it means the connection has been made. wrong.

When the connection is made, you need to configure the network in the operating system.

To begin with checking working group, for which we go to properties " My computer" You don’t have to open the properties, but use the combination Win+ R and enter in the window sysdm. cpl.

On all devices working group should be is the same, otherwise the computers will not see each other.

To change the group, just click on the button change and enter the group name. Name must be entered Latin alphabet, and match on all devices.

Then we look for network icon in the notification area and with its help we get to Network and Sharing Center.

Here we are interested in the link changes additional parameters , it's third from the left and will allow you to edit sharing settings. In each profile we select: Enable network discovery, auto-tuning And general access to files and printers.

Scrolling page and below turn off shared access with password protection. All other settings can be left. Click Save changes and exit.

This completes the setup. The network should work, but only if your router distributes dynamic addresses.

If you used a router, or the devices were connected directly with a cable, then you need to make a few more settings.

Network settings

In case direct connection or using a router, we need change IP addresses of computers. For this necessary:

We will not describe what each setting is responsible for, because... This is quite a large topic. It is enough to enter the addresses described above on all computers.

After making all the settings described above, the network should work. However, do not forget that a firewall or antivirus software can completely block the network. Therefore, if nothing works, check their settings or temporarily disable them altogether.

Local network via WiFi router

Setting up a network through a router is absolutely nothing no different from what we described above.

If the device is configured to distribute dynamic addresses, then there is no need to change the addresses. Well, what if IP users static, then you will have to use the previous section.

Also, there will be no difference between whether the device is connected by cable or via Wi-Fi; in most routers, the settings for distributing addresses are configured simultaneously and wireless and on wired connection.

How to make shared folders

After everything is configured, you need to create shared folders for information exchange.

However, this is not yet enough. Now on the folder properties window you need to find the bookmark safety. And then press successively Change – Add.

In my opinion, this is a very excellent topic to write about. At one time it was interesting to set up some kind of server on your computer for more convenient file sharing. Having tried different ones and even the protocol, I realized that I absolutely don’t like them, the first ones look, to put it mildly, poorly in the browser, the second ones, although they have their obvious advantages, I don’t want to connect a network drive on other people’s computers. But one (beautiful and sunny) day I came across a program called HTTP File Server (HFS for short), installed it, configured it (since I started working with the cleanest version, there were some problems with it) and almost fell in love with this program. To access my files, it is now enough to have any browser, since all access is carried out through a regular web page. I also created a folder into which a person who knows the password can add a file directly through the browser. Files from the server can be downloaded either one at a time or in folders at once. The program itself will place the folder in a .tar archive without compression and send it for downloading. At the same time, the site has a rather neat appearance, although if you wish (and have sufficient knowledge), you can write a site template yourself. Admit that this is a great way to transfer files easily and conveniently?

And here is an example of the page that you will see in the browser window, as you can see everything is beautiful and neat; you can find many beautiful templates on the program forum:

Although her menu is entirely on English, for me this is not a hindrance. And for those who do not know English well, at the end of the article I will try to explain as fully as possible what all sections of the menu are responsible for and how to use them.

So, let's move on to installing and configuring HTTP File Server:

1) To save you some time, I prepared an HFS assembly with a Russian-language website template and made the initial setup of the program itself. You can download the assembly from my Yandex.Disk using the link. If you are confident in your abilities, then you can download a clean version of the program on the official website http://www.rejetto.com/hfs/

That's all. I hope you found this article useful, click one of the buttons below to tell your friends about it. Also subscribe to site updates by entering your e-mail in the field on the right.

Thank you for your attention:)

Every Minecraft player wants to play with his friends on servers, but it is very difficult to find a decent server, and you want to be the admin yourself, so you can create your own Minecraft server. We wrote this article and filmed a video in which we sorted out everything that relates to the server and after it, you are unlikely to ask the question how to create a Minecraft server on Windows.

Video instructions:

There are many Minecraft server cores, we will tell you about the four most popular ones.

Now you need to decide for what purposes you need a server and, based on this, choose the kernel on which you will develop the server. We will show the creation of a server using the example of each core.

1) First, download the server itself of the version you need:

(downloads: 19105)

(downloads: 9868)

(downloads: 46817)

(downloads: 367)

(downloads: 20550)

(downloads: 14604)

(downloads: 958)

(downloads: 16895)

(downloads: 239)

(downloads: 744)

(downloads: 392)

(downloads: 115)

(downloads: 219)

(downloads: 124)

(downloads: 9650)

(downloads: 7982)

(downloads: 12181)

(downloads: 344)

(downloads: 194)

(downloads: 180)

(downloads: 187)

(downloads: 557)

(downloads: 227)

(downloads: 507)

(downloads: 4361)

(downloads: 5460)

(downloads: 254)

(downloads: 296)

(downloads: 253)

(downloads: 1437)

(downloads: 1085)

(downloads: 260)

(downloads: 181)

(downloads: 1736)

4) We start the server again, wait a few seconds and see that many files have appeared in the folder, including the world folder, which means the server has started normally. But you won’t be able to log in yet (unless you have a license, of course), to log in from a pirated site, open the file " server.properties" and find the parameter " online-mode=" and change the value from true on false.

5) You can enter the game, into a network game, add a new server, you can use IP "127.0.0.1" (Without quotes) or "localhost".

1) Download the server version you need:

(downloads: 60584)

(downloads: 350)

(downloads: 18611)

(downloads: 14065)

(downloads: 808)

(downloads: 1456)

(downloads: 14982)

(downloads: 623)

(downloads: 237)

(downloads: 8539)

(downloads: 7181)

(downloads: 408)

(downloads: 186)

(downloads: 411)

(downloads: 190)

(downloads: 266)

(downloads: 7022)

(downloads: 7211)

(downloads: 254)

(downloads: 378)

(downloads: 1849)

(downloads: 1676)

(downloads: 165)

(downloads: 1775)

(downloads: 334)

(downloads: 291)

2.1) Next, copy this file to the server folder.
Attention: Be sure to replace the line in the file spigot.jar to your server name, for example spigot-1.8.8-R0.1-SNAPSHOT-latest.jar !
To edit a file start.bat, you need to: right-click -> "Edit".

5) Go to the game, to the network one, add a new server, entering as IP - " localhost" (Without using quotation marks).

1) Download the version of the server on which you want to play:

(downloads: 239172)

2) Unpack the downloaded archive into a separate folder.

3) Run the file start.bat and you will see the following (* for version above 1.6):

4) Start the server again. We wait for the launch to complete and see the word “Done” at the end, which means everything is ok.

Greetings, active diggers in Minecraft! I’ll be honest, a couple of years ago I myself became actively addicted to this toy and killed a lot of time in it, which I now regret (the toy is very interesting but takes a lot of time). After playing a single-player game and building everything that was interesting to me, I got bored, and it was decided to play with friends online, and then on the Internet...

How to create a Minecraft server (Hamachi and LAN)

This note promises to be long, but we will not consider various mods and additions, we will create an original Minecraft server. Perhaps in the future I will try some interesting additions in practice, but now I don’t see the point in rewriting other people’s articles for show. So let's look at how to create a Minecraft server (Original)

About two years ago I bought myself a premium account of this wonderful game, but this is an optional condition for the server, we can download the server from the official website and allow pirate users to play with you. Surely there is a desire to play with friends, but friends have no desire to buy the game (personally, I’m more interested in playing with friends from offline than with strangers from nowhere.) So to speak, let’s create our own Minecraft server with blackjack and sh….

In fact, creating a server is as easy as shelling pears, but setting up a connection to it is exactly the most interesting thing, because this is no longer relevant to the game, but it is on these things that we will focus our attention, since little has been written about this, and questions arise like the rule is precisely in these moments.

1. Create and configure a Minecraft server

If anyone doesn’t know, the Minecraft game is written in JAVA and requires the appropriate software, the server is no exception. So we need to download and install current version Java, but if Minecraft works for you without problems, then you have everything you need installed on your system and no additional programs no need!

We have downloaded and installed everything we need, now let’s move directly to setting up the Minecrfat server. The most latest version always available on the official website on the downloads page. You can download the server directly from there without any registration, absolutely free.

We download the Minecraft server to our computer and, for convenience, put it in a separate folder (I, for example, in the MINE_SERVER folder - this is necessary because when you first start the server, it will create configuration files, and I don’t like a jumble of unknown things in one folder)

We start the server and wait until the world is generated, and at the same time the configuration files are created, after which we close the Minecraft server

After the first launch, a server.properties file will be created, in which all our settings are stored (you can open it using notepad, if you don’t know how to do this, read the article:). We look at the basic settings Minecraft servers and therefore I will make minimal changes, namely, I will allow pirate owners to use the server. To do this, I will write false in the online-mode parameter, this will tell the server not to check those connecting for the presence of a premium account.

Now we restart the Minecraft server (but with our settings) and try to connect to it. Since the server is located on our computer, we write in the server address localhost.

And now we are already in the game...

The same can be seen in the server.

This completes the creation of the server, now let's move on to the most interesting part - we are trying to provide our friends with access to this server.

2. Set up a connection to the Minecraft server via Hamachi

The most in a simple way games over the Internet, I consider creating a virtual network using Hamachi programs However, there is one drawback: free version will allow you to create a network of up to 5 computers. Let's take a closer look at this option:

Installing Hamachi to create a Minecraft server is very simple, you just need to create a connection on the main one and connect to it on the client ones, that's all)

Hamachi installation(Click to view)

Launch the installer and select the language

Program information

License Agreement

Installation options

Install Google Chrome as desired

Installation…

Installation complete

Now let's proceed directly to the hamachi settings. Click the “Enable” button

Come up with a computer name on the network and click Create

Then go to “Network” “Create a new network”

We come up with a name and password for new network(be sure to come up with a good password, because you will essentially be creating an ordinary local network, and expose your computer to additional vulnerability if they can guess your password)

After you have created your network, your comrades should launch Hamachi at their place, and select “Network” “Connect to an existing network”

Enter the name and password for the created network

Now on the main computer you can see who is connected

There is no point in creating a Minecraft server on the client machine; now we need to connect the lane to the server. To do this, we need the IP address of the server, since we use hamachi, we look at the IP in the program on the computer where the Minecraft SERVER is installed.

Then we enter it into the server address

...and we see that the Minecraft server is running and is ready to provide us with access to the game

That's all, as you can see, playing Minecraft online is very easy through Hamachi!

3. How to open port 25465

In order for the Minecraft server to be available for play from the Internet, we need to open port 25465. I will open it using the example of a standard firewall in Windows 8.1, but keep in mind that if you have third-party software, you need to configure it in it. Let's go!

In the Control Panel, go to “System and Security”

Open "Windows Firewall"

Click on “Advanced options”

Select incoming connections on the left and in the menu select “Actions”, “Create rule...”

for port

write the port number and select the protocol...

...and allow the connection...

...Check all the boxes...

Please note that this action must be performed for both protocols (TCP and UDP)

We are coming up with names for the ports...

...and the rules should look something like what I have in the picture below

We do the same for outgoing connections.

At this point, the opening of the port is completed, sometimes in order to process changes correctly it may be necessary to restart the computer (I don’t know what this is connected with)

4. Set up a connection to the Minecraft server without third-party applications

Actually, there’s nothing special to configure. We need to find out our external IP address, which can be done by going to the website 2ip.ru

You can also check if the port is open...

Enter the port number and click “Check”

After a short wait, you will receive a message that the port is open, if, of course, you have configured everything correctly

The next point is port forwarding from external IP to internal IP. This looks different for each router; you can read about DIR 300 and port forwarding there.

Therefore, you need to connect to such a server using its external IP address (for clients); the server owner can log in via localhost.

P.S. Well, now you know how to create a Minecraft server, if you have mastered this material, then you will figure out your further settings yourself and customize everything for yourself. All the best!

Creating your own local server based on a regular personal computer– the task is quite complex and painstaking. Here you need to understand the following points:

1. 1. , and whether you even need your own server. This is one of the key questions that requires a clear and unambiguous answer from the future administrator.
2. 2. What technical resources are at your disposal, and what will be necessary for the operation of a full-fledged server. Minimum technical requirements to create a “high-quality” server are quite high: the equipment alone will cost 70 - 80 thousand rubles.

Also note that for normal operation resource (for which you plan to make your own server), you need the server computer to be constantly on and work without interruptions. Therefore, it is necessary to ensure an appropriate power supply.

3. How much money are you willing to spend on creating and maintaining the server? In addition to the hardware costs indicated above, to create a full-fledged server on a computer, you need a dedicated (statistical) IP address and high speed data reception and transmission (the minimum value is 10 Mbit/sec). Accordingly, for this you will have to pay extra to the provider and enter into an additional contract for the provision of such services.

And before you try to make a server out of a computer, you need to clearly define all these nuances.

How to make a server from a home computer?

To create your own server, you first need to install a multi-user network operating system.

The choice is huge: Debian, FreeBSD, CentOS, OpenSUSE, Ubuntu, Windows and many others.

On the Internet you can find many examples of testing in the operation of the above-mentioned operating systems and their ratings in accordance with the test results. For example, the “SOS” rating for 2016:

1st place: “Debian” and “ Ubuntu Server»;

3rd place: “FreeBSD” and “ Windows Server»;

4th place: “Red Hat Enterprise”;

5th place: “Fedora”.

Of course, the lion's share of the network software market is made up of operating systems that occupy first place in the ranking. Therefore, in order to create a server on a computer for the first time, we recommend choosing one of them.

As an example, let's focus on the installation operating system"Ubuntu Server".

How to set up a local server from scratch on ubuntu?

1. Download and upload the operating system image to bootable USB flash drive. Boot your computer from the flash drive: at the first stage you will be asked to select a language.

3. In the next steps, select "Region" and "Keyboard Layout Settings";

4. Specify your username, computer account and password,

then click “Continue”;

configure “Disk Layout”

and select which disk the system is installed on;

6. Wait for the installation and system update to complete.

7. Select software, which you need for work.

8. Confirm that the installation is complete by clicking on the “Continue” button;

9. After restarting the computer to log in account You will need to enter the username and password created in step “4”;

10. This completes the installation of the server operating system and the initial creation of the server.

How to make yourself an admin on your server?

1. 1. To obtain administrator rights, enter the command “sudo su”;
2. 2. Default network settings servers are accessed using DHCP, but for the server to work you will need to change the value “iface eth0 inet static” in the file “/etc/network/interfaces” to “static IP address”. The text should look something like this:

iface eth0 inet static
address 192.168.0.100
netmask 255.255.255.0
network 192.168.0.0
broadcast 192.168.0.255
gateway 192.168.0.1

After saving, restart the network with the command “/etc/init.d/networking restart”.