Startup won't open on Windows 10. Start automatic maintenance

The fact that the painfully familiar “Start” button and the corresponding menu reappeared in the new Windows OS, version 10, was received with great enthusiasm by users. However, the joy turned out to be somewhat premature, because sometimes it happens that the Start menu does not open in Windows 10. Now we will look at how this situation can be corrected using the simplest methods.

Start does not open: possible causes of failures

Let's start with the fact that the “ten” itself, in the form of the initial version of the Technical Preview, was quite crude. In addition, it was installed as an update to an existing system.

From here you can immediately draw a conclusion about why the Windows 10 Start menu does not open. main reason Many experts call the errors of the previous operating system that the “ten” inherited. And this is primarily due to the system registry or local group policies, whose parameters simply duplicate registry keys. We'll come back to this a little later.

After updating Windows 10, Start does not open: what to do?

For now, let's look at a slightly different situation. Although it was initially stated that updates would not be released for the “ten,” they are released with enviable consistency. Here a situation may arise that is characteristic of almost all systems.

This could be an incorrect installation of the update or a “clumsy” update itself. What should I do if Windows 10 Start does not open after updating? First, you should pay attention to whether the button (and the menu, respectively) worked before the update was installed. If yes, you can simply try to run System Restore in the standard way by selecting a checkpoint that preceded the installation of the update.

Start won't open again in Windows 10? You can remove the update package manually. Only in this case, when viewing packages, it is necessary to sort by installation date, and then remove them one by one, followed by a system reboot to determine which update caused the failure.

After this, you can block the found package (disable its installation) and search again and install new packages. Only the search for critical updates, which are usually necessary to update the security system, should be done in manual mode, and it is advisable to do this immediately after blocking the attack package or packages.

Mandatory system check

So, Windows 10 Start still does not open. In this case, it is strongly recommended to perform a system scan. But you don’t need to do this using a standard scanning utility. system disk or section, but using a special command.

This means sfc /scannow, which is written on the command line (call cmd from the Run menu). You can also use this to enter the menu. If, even after a full scan, the Start menu does not open in Windows 10, proceed to the next step.

Correcting system registry entries

Now we have to make some changes in the system registry, but we need to be extremely careful with this.

First, you enter the registry itself (regedit command), after which you should go down the HKCU branch and reach the CurrentVersion section, where you select the Explorer line. On the right side, in the advanced settings, a 32-bit DWORD parameter is created, which must be called EnableXAMLStartMenu, and then assigned the value “0”. If such a parameter is already assigned, it must be changed to the same value (zero). It is not clear why, but the system sometimes does not accept the default configuration.

With all this, if you don’t want to manually enter all the parameters in the registry (or it’s not possible), sometimes you can use a special script in the form of an automatic command entered into the “Run” menu, but it only duplicates the entered values ​​and parameters.

Using PowerShell

Now look at the button and menu. Windows 10 still won't open Start even after doing this? Let's move on to drastic actions. This requires the use of special PowerShell algorithms.

We call the “Task Manager” either with the three-finger combination Ctrl+Alt+Del, or with the taskmgr command. In the window that appears, we are interested in the file menu, where we should create a new task and enter it in the PowerShell field and run it with administrator rights.

Now the most important thing: we enter the executable code in the form of a special line and wait for the process to complete execution. You can respond to errors that arise. After this, the button and menu will definitely start working.

Instead of a conclusion

As you can see, if “Start” does not open in Windows 10, there is nothing particularly terrible about it. Methods for correcting this situation are quite simple and can be done by any user. Another thing is issues related to the so-called clean install, such as Windows 10 Pro, Home or Enterprise. Most likely, if “Start” does not function, it was only due to the fact that the installation new system was done without formatting the hard drive. But the errors of the previous version could also remain. In any case, you will have to look for the root cause, but it is very likely that these versions had their own updates installed, perhaps the distribution kit or disk image was downloaded from an unofficial source, but you never know what could happen.

If none of the above methods help even after a clean installation, the installation will have to be done again, and use at least part of the system disk or partition. If you need to save some information at the same time, you will need to first copy it to another partition or, say, to removable media in the form of a regular USB flash drive.

Operating system updates from Microsoft improve your computer's performance, make it safer, and add new functionality to the OS. However, with such updates come some problems. For example, after the next update, some users see that their “Start” button does not work in Windows 10.

At the same time, it does not easily respond to a mouse click on its icon, but it also does not work after clicking Win buttons on the keyboard (Windows logo key). Often, along with such a problem, the system parameters, as well as its other elements, do not open. In this article we will figure out how to get out of this situation and return the system to working order. If you do not want such difficulties to be repeated in the future, you can completely.

To combat the constantly broken Start menu, in 2016 Microsoft even created a special application that was supposed to automatically fix the problem.

This method is the easiest, so use it first. If after rebooting the system the start still does not work, move on to the next options. Explorer.exe is a Windows graphical shell. It is responsible for everything we see: windows with Explorer, the taskbar, the system tray, and even widgets. Like all other programs this application may malfunction, for example, due to a basic conflict with data cells in RAM. So, in order to bring the Start menu back to life, first of all, let’s try to restart this process.

How to fix

Follow our instructions:

1. Launch the task manager. You can open it using the Ctrl+Shift+Esc button combination or through the context menu of our taskbar. To do this, right-click on its empty space and select the item indicated in the screenshot.

1. If you are running the tool for the first time, you will need to deploy it. To do this, click on the “Details” button. We have marked it with a red frame.

1. Go to the tab called “Processes” and find there the “Explorer” process (sometimes may be called Explorer). With the help context menu launched by right-clicking on the process name, select “Restart”.

All GUI Windows 10 will disappear for a moment and reappear. If this option does not solve your problem, then feel free to move on to the next method - it will be more effective.

Solving the problem using the system registry

This method is more effective than the previous one. It involves changing the key value system registry. If there is no such key, we will create it. Let's look at how to do it correctly.

1. Initially, you need to run the standard Windows utility 10 called regedit. In order to do this, press the combination Win + R and enter the word regedit in the window that appears.

1. In the window that opens, on the left side there is a registry directory tree. We follow the path indicated in the screenshot. On the right side of the program, select the EnableXAMLStartMenu key, and if it does not exist, then create it. To do this, click on the empty area on the right side of regedit RMB on the item “Create” - “DWORD value (32 bits)”.

1. Now we rename the new parameter to EnableXAMLStartMenu and, opening it by double-clicking, set the value to “0”.

1. In order for the changes to take effect, you need to restart the Windows GUI. We described how this is done in the first method.

Correction of Cyrillic username

Sometimes the Start menu stopped working after creating a new one Windows user with a name written in Russian. In order to correct this situation, you need to use the Computer Management utility and correct the name. Let's look at how this is done.

1. Initially, we open computer management through Windows search. To do this, click on the magnifying glass icon on the taskbar and enter the query in the search bar. When the result appears, click on it.

1. Next, on the left side of the window, open the “Utilities” section, go to “ Local users and groups" and click on the "Users" folder. In the right part of the window, find the name that needs to be renamed and right-click on its name. There will be an item “Rename” - that’s what we need.

Ready. The Computer Management tool can be closed; the changes will be applied as soon as you restart the system. If this method does not give the desired result, try creating another user and checking the functionality of the Start menu on it.

To do this we do the following:

1. Launch the “Run” utility. To do this, use two simultaneously pressed Win + R keys. In the window that appears, enter the word control and press Enter.

1. After opening the control panel, go to the “User Accounts” menu.

1. Click on the inscription indicated in the screenshot.

1. Next, select “Manage another account.”

1. And add a new user.

1. You can get to the same menu in another way. Open the curtain Windows notifications 10 and click on the “All parameters” tile.

1. Scroll down the window that opens a little and select the “Accounts” tile.

1. On the left side of the window, select the “Family and other users” subsection, and on the right, click on “Add a user for this computer.”

1. Here you can create another Windows 10 user. If you do not want to link his account to your account Microsoft records, click on the item indicated in the screenshot, and in the menu that opens, select “Add user without account Microsoft."

Restart your computer or simply end your current session and select Create given user. If the launcher starts to open, then the problem is in the account.

We use automatic maintenance mode

Windows 10 has its own debugging tool, which is supposed to fix various problems for the user. Sometimes this function solves the problem of the non-working “Start” button. Let's look at how to use it.

1. In the search bar of Windows 10 (which is launched by the magnifying glass icon), we write the words: “This computer.” Right-click on the item indicated in the screenshot and select “Properties”.

1. In the window that opens, click on the words “Security and Service Center” (located in the lower left corner).

1. Expand the “Maintenance” section.

1. Using the button indicated in the screenshot, we launch automatic system maintenance.

1. The service has begun and will take time. The less you use your computer during this period, the faster the process will complete. Upon completion of the PC scan, all problems found on it will be corrected if possible. If desired, the service can be disabled.

Attention! For a more complete, quick and correct check, we recommend closing all running programs and saving the data. The program runs only as an administrator.

Using PowerShell to fix the Start menu

Here is another option that will help improve the operation of the Start menu. We take the following steps:

1. First you need to launch PowerShell itself. To do this, we will use the built-in search tool. Click on the magnifying glass icon on the left side of the taskbar and enter the PowerShell command in the search field. When the result we need appears (indicated by number 3 in the screenshot), click on it right click mouse and select the “Run as administrator” section.

Sometimes a program cannot be found through search. To get around this problem, go to Windows Explorer along the path indicated in the screenshot and run powershell.exe. This must be done as an administrator. To do this, right-click on the name and select the desired item.

Call Windows PowerShell it is possible through command line, but you must run it as an administrator. After cmd.exe opens, type the powershell command into the black window and press Enter.

When the program is running, insert the entry into it:

Get-appxpackage -all *shellexperience* -packagetype bundle |% (add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “\appxmetadata\appxbundlemanifest.xml”))

Executing the command will take a couple of seconds. Now restart your computer and check if the startup starts working. If not, then move on to the next method.

Attention! Using this method may interfere with the functionality of Windows Store. Therefore, it should be used only as a last resort.

Start Menu Fix Utility

As we have already said, Microsoft developers are aware of the problem with Start. That is why they created a miniature program with which we will work. Follow our instructions:

1. Initially, let's download the program using the button below. The download is from the official Microsoft website.

1. Run the application as an administrator (no installation required) and click on the “Advanced” line.

1. Make sure that the checkbox next to “Automatically apply fixes” is selected, and press the “Next” button.

1. The program is running - the system is checked for problems with the Start menu.

1. As you can see, no problems were found. If you have them, corrections will be made automatically. If you click on the “View additional information” item, you can understand what criteria the Microsoft tool uses to look for problems.

Parameters that the program checks:

• incorrectly installed important applications;
• problems in the system registry;
• tile database integrity;
• application manifests.

The report that the utility produces can be printed, and each item in the window displays a tooltip explaining its purpose. These same items are also elements of the table of contents: if you click on one of them, you will be taken to the desired part of the help section.

What to do if the problem is not solved?

We have presented many methods in case the Start button in Windows 10 stops working, which are usually enough for any situation. But even if none of them helped you, don’t be upset. Any OS from Microsoft, and the Ten in particular, has a system control points, thanks to which you can roll back Windows to the state in which the system was at the time such a point was created.

It is important to create checkpoints before any serious action with the OS, and especially before updating, which often leads to problems. In any case, if you still have questions, ask us in the comments, and we will try to answer in as much detail as possible and help solve the problem.

Video on the topic

Updates in Windows 10 constantly cause inconvenience to users, forcing them to waste time searching for the causes of problems and fixing them. Many people, having rebooted their computer after installing the next batch of unknown updates, were faced with the fact that the button did not work Windows start 10.

The menu does not open by clicking on the Start icon and does not respond to the Win key (with the window logo). Sometimes, in addition to this, the “Options” menu may not open and other graphical menus may not function. To fix the problem, read this article to the end and follow the instructions contained in it.

Interestingly, in the summer of 2016, Microsoft deigned to release an application for finding and getting rid of factors blocking the appearance of Start.

Restarting the process responsible for the Windows GUI

Explorer.exe is a file that is a graphical shell for Windows. Thanks to it, Explorer, all windows and menus work operating system. During its operation, a problem may occur (for example, conflicts with addresses RAM). If startup does not work in Windows 10, the first thing you should do is restart the “explorer.exe” process.

1. Call the “Task Manager” using the keyboard shortcut Ctrl+Shift+Esc or the taskbar context menu.

2. Go to the “Processes” tab if the window opens in a different one.

If the dispatcher is launched in a simplified window, click on the “Details” button.

3. Find the “Explorer” or “Explorer” process and call the “Restart” command.

4. We confirm our intentions to interfere with the functioning of the system process.

The method does not always work, so you should not rely on its success.

Changing the value of one of the system registry keys

The next step that should be taken in order to get Start to work is to change the value of one of the parameters responsible for the operation of the menu (if there is no key, you will need to create it).

1. Call the registry editor integrated into the Top Ten (run “regedit” in the search bar or command interpreter).
2. We go to the section with the parameters of the current user - HKCU.
3. Go to the path Software\Microsoft\Windows\CurrentVersion\Explorer.
4. Find the “EnableXAMLStartMenu” key and change its value to “zero”. If there is no parameter, we create a DWORD key with a marked name and value.
5. We restart the “explorer.exe” process for the new configuration to take effect.

Other quick methods to get Start to work

Some users noticed the problem appeared after creating a new account, the path to which contained Cyrillic characters (the username was in Russian). In this case, you need to use the Computer Management tool and change the path to the user directory (rename the folder in which the account information is stored).

The automatic maintenance function of the operating system also sometimes helps. To activate it, go to the “Properties” of the system, where in the menu located on the left, click on the “Maintenance and Security” link located at the very bottom. Expand the “Maintenance” item and click on the “Run” button. In the near future (the more free resources, the faster) Windows 10 will search for and fix all problems on your computer. This option also rarely helps, but it is necessary to look for the right solution.

Create a new account

It happens that the above options do not give the expected results, in particular, renaming the user directory. Try creating a new user whose name should not contain Russian characters.

1. Call up the “Run” window (press Win + R).
2. Enter “control” and execute the command.
3. After opening the applet, create a new account and log into Windows from under it.

Basically, Start and all other graphical elements work fine. If this is the case, import all the settings and transfer the files from the old account directory and delete it.

Let's use PowerShell

In the end there was less safe way make Start function. However, using PowerShell (Advanced Command Prompt) may cause problems with the app store.

Before following the steps in these instructions, it is recommended to create a system rollback point.

To run the tool, go to the “\System32\WindowsPowerShell\v1.0” directory located in the OS folder and run the powershell.exe file as an administrator.

No less simple option calling the extended command line is executing the “powershell” command in a command line running with administrator privileges.

Insert the following command into the text line of the PowerShell window that opens and run it:

Get-appxpackage -all *shellexperience* -packagetype bundle |% (add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “\appxmetadata\appxbundlemanifest.xml”))

The operations will take a matter of seconds, after which check if Start opens. If we fail again, we move on.

Let's use the official utility from Microsoft, called to solve a problem with the Start menu

The tiny program works on the same principle as the troubleshooting tool, but regarding graphical elements, in particular the Start.

1. We go to the Microsoft website and download the application.
2. We launch it and click “Next”, having familiarized ourselves with the work being performed.

Any problems found will be automatically corrected, and the user will be notified about this in a window with the results of the program. You can disable this option in advance in order to fix the problem(s) yourself. Also, a message may appear in the final window that the tool has not detected any abnormalities in the system.

To get acquainted with the details of how the utility works, click on the “View additional information” link.

The latest version of the application performs the following checks:

• availability and normal functioning of ShellExperienceHost and Kartana;
• checks whether this user has rights to access the registry key, which stores the data necessary for the operation of the Windows 10 graphical shell;
• will check the integrity of the database in which program tiles are stored;
• scans the application manifest for corruption.

You can download the utility via the direct link http://aka.ms/diag_StartMenu. Don't worry that the URL doesn't have the word "Microsoft" in it; it's just a shortened version of where the program file is stored.

Nothing helped

Even if none of the points in the article helped to return Start, you should not despair. Most users have the checkpointing feature enabled in Windows 10, which makes it possible to roll back the system to an earlier state. These same points are necessarily created before updating the OS, which becomes the main reason for the Start inoperability.

As a last resort, it is not prohibited to reset the “ten” or roll back to its original state.

Another operating room glitch Windows systems 10 is the Start button suddenly not working. Just imagine that you are working, working, and then bam - and such a surprise popped up. Start stopped working due to regular Windows 10 updates, either because you messed up something in the registry, or it was not you who messed up the registry, but some program. What to do in this case? I've sketched out a few ways to solve this problem and get the Start menu working.

The first method I have is for those who like radical measures. Namely, you can do it, follow the link and read how it can be done.

The second method helps in almost all cases.

Restoring the Start Menu Using PowerShell

In order not to describe for a long time what’s what, I’ll say that PowerShell is a utility similar to the command line, only even cooler. How can we launch it if this very “Start” does not work for us. This can also be done in several ways.

Firstly, you can press the Win+R key combination and enter powershell in the window that opens

Secondly, you can do this through the task manager. Press the key combination Alt+Ctrl+Del and go to the task manager. A window opens in which we click on "File - Run new task"

In the window that opens, place a bird next to the item “Create a task with administrator rights” and enter the powershell command.

We get the following window.

Copy the following set of commands into it:

Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml”)

Click on enter. The “spell” you entered has started working, and in a few minutes you will see errors highlighted in red in the window. After that, you can click on “Start” and check its functionality.

The next way to restore the Start button is to restart Explorer

To do this, go to the task manager we already know and in the “Processes” tab, restart the explorer. Right-click on the corresponding process and select the item from the drop-down menu "Restart".

Working our magic on the registry editor

If all else fails, then turn to the registry. To do this, press the key combination we already know Win + R and in the window that opens, write the command regedit. Click "OK".

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced

WITH right side window we look at the parameters. We look for EnableXAMLStartMenu, if it doesn’t exist, then we create it. To do this, click on an empty space and select "New - DWORD Value (32 bits)"

Set the value 0 to the newly created parameter.

If you had this parameter, but it had a different value, then you need to change it to 0.

Now all that remains is to restart the computer and Check if the Start button works.

I hope you have fixed your problem and I will be glad if you write down in the comments about the work done, and also indicate in what other ways you solved this problem.

We also watch the video

Upgrading to Windows 10 was not without consequences for many. As often happens, Microsoft rolled out a “crooked” update, so on some computers, laptops and netbooks it brought as much joy as problems. And one of these is the failure of the Start menu to work correctly. Sometimes rebooting the system helps, but in some cases even that doesn’t help. What to do if the Start menu does not work in Windows 10?

We invite you to look at all the ways to solve this problem in the course of this article. By the way, judging by the latest news, other elements built into the newly built system also refuse to work from time to time. With the help of our tips you can overcome them too.

What to do if the Start menu does not work in Windows 10

You probably know the combination that turns on the Task Manager. Yes, yes, these are the famous three buttons CTRL+Alt+Del. What to do:

If a miracle did not happen and it still does not function, then the problem is somewhere else and a different solution must be sought. Fortunately, our article does not end here.

PowerShell as a way to get Start back up and running

Let's figure out what needs to be done:

There are two options to launch PowerShell - climb into the jungle of the operating system through a huge number of folders or use the “Run” window. We suggest you use the second option - it is faster, simpler and more convenient.

1. Launch the “Run” window using the Win+R key combination;
2. Enter “Powershell.exe” into the line, then click “OK”;
3. A window similar to the Command Prompt, only blue, opens;
4. Copy the following combination and paste it into the program: Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)\AppXManifest.xml” ;
5. Click on “Enter” to execute it;
6. After some time, you should check if the Start menu is working.

Restoring functionality to Start using the Registry

Next, you should check again whether the Start menu is working or not.

If nothing like this has yet happened, there is no need to despair - there is only one last option.

Security and Maintenance – Built-in Problem Solver

Create a new user

Often the problem is in the Russian username, so you should create a new one:

When you boot your computer, select the user you just created and check that the Start menu is working. One of these methods should bring him back to life anyway.

After updating to a new version of the operating system, some users are faced with an unpleasant situation - the Start button does not work in Windows 10. But you can get rid of this problem on your own.

Why doesn't the Start button work?

The main reason why the Start button does not work is reset functional settings in the OS registry editor. The Administrator settings may also be reset. But such a problem arises due to the user’s fault, and not due to OS defects (it’s useful to read “”).

Restoring functionality

Even if you are not a professional user, you can still restore the functionality of the Start menu on your own.

Restarting Explorer

An easy way to fix this problem is to restart Explorer.

Fixing the situation using PowerShell

Changing Registry Editor settings

Creating a new user on the device

Video

Watch the video for more details on how to use the methods described above, and also learn about alternative ways to solve this problem.

Conclusion

There are several ways to restore the Start button after updating Windows. If none of these help, restore your system through the Settings app using bootable flash drive or disk.

Windows 10 is considered one of the best operating systems in the Microsoft line. Since its introduction, users have noted some bugs and problems, most of which have now been completely resolved. Unfortunately, the problems of the “ten” continue to be relevant, and a search for solutions is constantly needed.

One of these problems is a problem with the operation of the Windows 10 Start button. This bug is often accompanied by the inability to open other system elements (for example, the All Settings window). The Start button may not work after the update. Also, a problem with the menu and button may occur after installing Windows 10 from scratch.

We will try to describe all the options why this happens and ways to resolve the situation, the effectiveness of which has already been proven by Windows 10 users.

Among the methods for solving the problem with the operation of the Start menu, a banal reboot of the explorer.exe process on a personal computer with Windows 10 stands out. To do this, press the key combination CTRL+ALT+DELETE to call the Task Manager. Another way to get to the Task Manager is to press CTRL+SHIFT+ESC. Here we click on “More details”. If there is no such window, simply go to the “Processes” tab.

Among all the processes we are looking for “Explorer”. In the English version of Windows 10, this process appears as Windows Explorer. Right-click on this process to bring up the context menu and click on “Restart”.
This method is ineffective, but if there was no particular problem with the operation of the Windows 10 Start button, this method may work. More serious problems will require more serious measures.

Resuming the Start Menu using PowerShell

Before you start working with PowerShell, you should keep in mind that this method, in most cases, works great to solve problems with the Start menu. However, this method may entail changes in the system and, therefore, other troubles may arise. In particular, we are talking about disruptions in the operation of some applications downloaded from the Dozens store. So, first of all, we try the method described in the previous paragraph, and move on to manipulations with PowerShell if the actions do not bring results.

Since the Start button is disabled, the PowerShell function can only be launched from the Windows\System32\WindowsPowerShell\v1.0 folder. We look in this folder, and then right-click on the powershell.exe file to run it as administrator,

There is another method to run the PowerShell file with administrator rights. You need to right-click on “Start”. A menu will open where you need to click “Command Prompt (Administrator)”. In the field we type powershell. In the future, all necessary combinations are entered here. When working with the command line, a separate window will not open.

In the PowerShell window, enter the following command:

Get-AppXPackage -AllUsers | Foreach (Add-AppxPackage -DisableDevelopmentMode -Register “$($_.InstallLocation)AppXManifest.xml”)

You don't have to do this manually, just copy and paste. After the command is completed, try to open the Start menu. If there is no discovery, move on.

Working with the Windows 10 Registry Editor

There are several more ways to bring the Start menu to working condition. Among these additional methods, a good option would be to do certain manipulations with the registry editor.

To enter the editor window, press Win+R and enter the regedit command in the line that appears. We will need a section HKEY_CURRENT_USER\ Software\ Microsoft\ Windows\ CurrentVersion\ Explorer\ Advanced.

Right-click anywhere in the field on the right. Select “Create”, then DWORD (32). The new parameter must be named: EnableXAMLStartMenu. Now let's set the desired parameter value. This is done by double clicking the mouse. We assign the parameter the value 0.

We solve the problem by creating a new user

If the problem persists, perhaps creating a new user will be a way out. Press “Win” + R. In the search field, enter Control to enter the control panel, in which we create a new user.
You can also create a new user via the command line. Press “Win” + R, enter net user Username /add in the field .

As a rule, for a new user, the start menu and all settings work without problems. All that remains is to transfer all the files to the new account.

What to do if none of the options helped

It happens that nothing helps. Then all that remains is to use Windows recovery mode. This means a return to the original state. But usually a simple update rollback works. In “Control Panel” select “Programs and Features”. Here we look through the updates and delete the most recent one.
Rolling back updates is good because after updating again, there are no problems opening the Start menu.

A significant disadvantage is the time that you will have to spend waiting for the previous version of Windows 10 to load. Any of the methods listed can help. But you need to start trying exactly in the order in which we arranged them. This way, the likelihood of aggravating the problem with the Start button is minimized.

Operating updates will be available from the official Microsoft website. Microsoft systems improve the performance of your computer, make it safer and add new functionality to the OS. However, with such updates come some problems. For example, after the next update, some users see that their “Start” button does not work in Windows 10.

At the same time, it does not easily respond to a mouse click on its icon, but it also does not work after pressing the Win button on the keyboard (the key with the Windows logo). Often, along with such a problem, the system parameters, as well as its other elements, do not open. In this article we will figure out how to get out of this situation and return the system to functionality. If you do not want similar difficulties to be repeated in the future, you can completely.

To combat the constantly broken Start menu, in 2016 Microsoft even created a special application that was supposed to automatically fix the problem.

This method is the simplest, use it first, if after rebooting the system the start still does not work, proceed to the next options. Explorer.exe is a graphical Windows shell. It is responsible for everything we see, including Windows Explorer, the taskbar, the system tray, and even widgets. Like all other programs, this application may malfunction, for example, due to a basic conflict with data cells in RAM. So, in order to bring the Start menu back to life, first of all, let’s try to restart this process.

How to fix

Follow our instructions:

1. Launch the task manager. You can open it using the Ctrl+Shift+Esc button combination or through the context menu of our taskbar. To do this, right-click on its empty space and select the item indicated in the screenshot.

1. If you are running the tool for the first time, you will need to deploy it. To do this, click on the “Details” button. We have marked it with a red frame.

1. We go to the tab with the name: “Processes”, find the “Explorer” process there (sometimes it can be called Explorer) and using the context menu launched by right-clicking on the process name, select the “Restart” item.

The entire Windows 10 GUI will momentarily disappear and reappear. If this option does not solve your problem, feel free to move on to the next method, it will be more effective.

Solving the problem using the system registry

This method is more effective than the previous one; it involves changing the value of the system registry key. If there is no such key, we will create it. Let's look at how to do it correctly.

1. Initially, you need to run the standard Windows 10 utility called regedit. In order to do this, press the combination Win + R and enter the word regedit in the window that appears.

1. In the window that opens, on the left side there is a registry directory tree. We follow the path indicated in the screenshot. On the right side of the program, select the EnableXAMLStartMenu key, and if it doesn’t exist, create it. To do this, right-click on the empty space on the right side of regedit and select “New” - “DWORD Value (32 bits)”.

1. Now we rename the new parameter to EnableXAMLStartMenu and, opening it by double-clicking, set the value to “0”.

1. In order for the changes to take effect, you need to restart the Windows graphical interface. We described how this is done in the first method.

Correction of Cyrillic username

Sometimes the Start menu stopped working after creating a new Windows user with a name written in Russian. In order to correct this situation, you need to use the Computer Management utility and correct the name. Let's look at how this is done.

1. Initially, we open computer management through Windows search. To do this, click on the magnifying glass icon on the taskbar and enter a query in the search bar. When the result appears, click on it.

1. Next, on the left side of the window, open the “Utilities” section, go to “Local users and groups” and click on the “Users” folder. In the right part of the window, find the name that needs to be renamed and right-click on its name. There will be a “Rename” item here, which is what we need.

Ready. The Computer Management tool can be closed; the changes will be applied as soon as you restart the system. If this method does not give the desired result, try creating another user and checking the functionality of the Start menu on it.

To do this we do the following:

1. We launch the “Run” utility; to do this, use two simultaneously pressed Win + R keys. In the window that appears, enter the word control and press Enter.

1. After opening the control panel, go to the “User Accounts” menu.

1. Click on the inscription indicated in the screenshot.

1. Next, select “Manage another account.”

1. And add a new user.

1. You can get to the same menu in another way. Open the Windows 10 notification shade and click on the “All Settings” tile.

1. Scroll down the window that opens a little and select the “Accounts” tile.

1. On the left side of the window, select the “Family and other users” subsection, and on the right, click on “Add a user for this computer.”

1. Here you can create another Windows 10 user, if you do not want to link his account to a Microsoft account, click on the item indicated in the screenshot, and in the menu that opens, select “Add a user without a Microsoft account”.

Restart your computer or simply end your current session and select the user you created. If the launcher starts to open, then the problem is in the account.

Using automatic maintenance mode in Windows 10

Windows 10 has its own debugging tool, which is supposed to fix various problems for the user. Sometimes this function solves the problem of the Start button not working, let's look at how to use it.

1. In the search bar of Windows 10 (which is launched by the magnifying glass icon), we write the words: “This computer.” Right-click on the item indicated in the screenshot and select “Properties”.

1. In the window that opens, click on the inscription: “Security and Service Center” (located in the lower left corner).

1. Expand the “Maintenance” section.

1. Using the button indicated in the screenshot, we launch automatic system maintenance.

1. The service has begun and will take time. The less you use your computer during this period, the faster the process will complete. Upon completion of the PC scan, all problems found on it will be corrected if possible. If desired, the service can be disabled.

Attention! For a more complete, quick and correct check, we recommend closing all running programs and saving the data. The program runs only as an administrator.

Using PowerShell to fix the Start menu

Here is another option that will help improve the operation of the Start menu. We take the following steps:

1. First you need to launch PowerShell itself. To do this, we will use the built-in search tool. Click on the magnifying glass icon on the left side of the taskbar and enter the PowerShell command in the search field. When the result we need appears (indicated by number 3 in the screenshot), right-click on it with our manipulator and select the “Run as administrator” section.

Sometimes a program cannot be found through search. To get around the problem, go to Windows Explorer along the path indicated in the screenshot and run powershell.exe. You need to run the file as an administrator. To do this, right-click on its name and select the desired item.

You can also call Windows PowerShell through the command line; you must run it as an administrator. After cmd.exe opens, type the powershell command into the black window and press Enter.

When the program is running, insert the entry into it:

Get-appxpackage -all *shellexperience* -packagetype bundle |% (add-appxpackage -register -disabledevelopmentmode ($_.installlocation + “\appxmetadata\appxbundlemanifest.xml”))

Executing the command will take a couple of seconds. Now restart your computer and check if the startup starts working. If not, move on to the next method.

Windows 10 Start Menu Fix Utility

As we already said, people from Microsoft are aware of the startup problem. That is why they created a miniature program with which we will work. Follow our instructions:

1. Initially, let's download the program using the button below. The download is from the official Microsoft website.

1. Run the application as an administrator (no installation required) and click on the “Advanced” line.

1. Make sure that the box next to “Automatically apply fixes” is checked and press the “Next” button.

1. The program is running and the system is being checked for problems with the Start menu.

1. As you can see, no problems were found. If you have them, corrections will be made automatically. If you click on the “View additional information” item, you can understand what criteria the Microsoft tool uses to look for problems.

Parameters that the program checks:

• incorrectly installed important applications;
• problems in the system registry;
• tile database integrity;
• application manifests.

The report that the utility produces can be printed, and each item in the window shows a tooltip explaining its purpose. These same items are also elements of the table of contents; if you click on one of them, we will be taken to the desired part of the help section.

What to do if the problem is not solved?

We have presented many methods in case the Windows 10 start button stops working, for example, after an update, and usually they are enough for any situation. But even if none of them helped you, don’t be upset. Any Windows OS, and Ten in particular, has a system of checkpoints, thanks to which you can roll back Windows to the state in which the system was at the time such a point was created.

Another glitch of the Windows 10 operating system is the Start button suddenly not working. Just imagine that you are working, working, and then bam - and such a surprise popped up. Start stopped...