Xiaomi firmware via Fastboot. Xiaomi firmware Update xiaomi mi4 c firmware

Modern smartphones cannot be imagined without their main component – ​​the operating system. It is this that reveals to the user the enormous potential of a smartphone, allowing a person to work with a powerful device as conveniently and dynamically as possible. Absolutely all smartphones come off the assembly line with a pre-installed operating system.

Users who are not satisfied with the standard firmware have the opportunity to install their own, having a computer and a clear set of programs and drivers at hand. Firmware via MiFlash will help not only update the internal components, but also fix a huge number of problems, including bootlap, persistent system errors and a “bricked” apparatus.

What is needed for firmware

What will you need to have in order to successfully install new firmware?

• Computer running operating system Windows versions 7, 8, 8.1, 10 any bit size ;
• The program with which the firmware will be installed - (it will also install all necessary drivers for work). If you have installed old version, then before installing a new one, you must remove the old one.
• Downloaded firmware that needs to be installed on the phone. It must be up-to-date, stable and exactly suitable for your specific phone model. The firmware format should be ".tgz", if you only have ".gz", just rename its format.
• Your smartphone, its model must be no older than Xiaomi Mi3 and have a Qualcomm processor.

Installing MiFlash

Disabling driver verification

For proper interaction between a computer and a phone, you must have installed drivers on Windows. In order for them to be installed correctly into the system, you need to disable the function on your computer that verifies the authenticity of installed drivers - then the phone will be flashed without problems.

For Windows 7, restart your computer. Immediately after loading the BIOS, quickly press the F8 button several times (you may have a different key), after a short time a list of additional commands for loading the operating system will appear. In the "Advanced boot options" section, select "Disable driver signing requirement."

Remember this step if, when following these instructions, problems arise with the driver installation running as administrator command line Enter and run the following commands one after another:

bcdedit.exe /set loadoptions DDISABLE_INTEGRITY_CHECKS

bcdedit.exe /set TESTSIGNING ON

After each command, check the computer's response that the command was completed successfully, then turn off and on the computer.

IN Windows environments 8, 8.1 and 10, hold down the Shift key on the keyboard, then use the mouse to reboot through the “Start” button. Follow the path by pressing the “Diagnostics”, “ Additional options", "Boot options", "Reboot". The system will reboot; in the corresponding screen, press F7 to use the boot option “Disable mandatory driver signature verification”.

Launch MiFlash

1. Download the MiFlash program. The archive must be unpacked into a previously prepared folder with the same name along the path “C:\Android\”. To avoid syntax errors in all paths, use only the Latin alphabet, no Cyrillic alphabet, spaces and a minimum of characters.
2. Select the firmware that needs to be installed. Download it to your computer and unpack the archive into the above folder.
3. Run the program's executable file. Agree to start installing the drivers by clicking on the “Next” button (if the installation does not occur properly, see point 1). You will have to wait a while for the files to be unpacked and integrated into the system. After notification of successful installation, close the program window by clicking on the “End” button.

Connecting your phone to your computer

1. Now let's move on to the phone. Make sure it is charged at least 50%. Turn it off in the usual way, then switch it to “Fastboot” mode - turn it on with a special key combination, holding down the power button and the volume rocker down at the same time. After a short time, an image with a bunny wearing earflaps will appear.

1. When the phone is in this mode, connect it to the computer. It is highly advisable to use the cable that came with the phone - this will ensure the most stable connection. If you don't have one, just take the wire good quality. Insert the corresponding plug into the Xiaomi device, plug the other end into the USB 2.0 connector on your laptop or computer.
2. Launch Command Prompt in Windows as Administrator. Using the command cd c:\Android\, go to the directory created earlier when installing the miflash program.
3. We check the “friendship” of the computer and the phone - enter the command fastboot devices into the command line, after which an inscription similar to xxxxxxx fastboot will appear (it will mean that the synchronization was successful). If we see the message waiting for device on the screen, you need to check whether you forgot to connect the phone, and also check that the cable is working properly. Alternatively, reinstall the drivers.

1. Use the fastboot oem reboot-edl command to switch your smartphone to the special “Emergency Download Mode”. At this time sound notification notifies you when a new device appears on your computer. The synchronization of the devices is completed, you can proceed directly to the firmware.

Phone firmware

1. Open the MiFlash program again. Click on the “Refresh” button, then use “..” to show the program the folder where you previously placed the required firmware.
2. Next, we need to choose whether we will save the data on the phone or completely delete everything. As a rule, the second option is recommended; then the firmware will be installed most correctly. Click on the “Flash all except storage” button in order to leave the data on the phone, for full formatting select "Flash all". After making your selection, click on “Flash”. Then the program will perform the selected action and the firmware will begin Xiaomi Redmi 3S (or any other).

1. The speed of installation of the operating system depends on the size of the firmware itself, the speed of the cable and the speed of the memory inside the device. In any case, a time investment of 10 minutes to 1 hour is quite normal.
2. After MiFlash is completed, the phone will reboot on its own. If automatic reboot was not completed, run the command fastboot oem reboot-edl in the Windows command line, or press and hold the power button on the phone until the firmware logo appears on the display. Then carefully disconnect the cable from the smartphone.
3. After installation new firmware The phone will take a relatively long time to boot for the first time. Depending on the technical nuances of the operating system, the boot logo can hang from 5 minutes to half an hour. In exceptional cases, you can try to wait 1-2 hours provided that the phone is connected to the charger.

Possible problems

If no changes are observed on the screen for a long time, try removing the battery for 20-25 minutes, then inserting it back and starting the smartphone again. If this does not help, leave it turned on for a long time so that its battery is completely discharged (do not forget about the phone in this form for a very long time, no more than 4-8 hours (depending on the battery capacity and its age) to avoid serious problems with the battery). After the phone turns off, connect it to the charger and turn it on again.

If the steps described above do not help, try installing a different firmware, or reinstalling the previously selected one.

If during the installation of the operating system a notification appears that there is not enough memory to perform this operation, try repeating the instructions on Windows x64. If changing the OS bit depth does not help, you will have to use another very popular installation program - Flashtools.

If the error “remote-Need to unlock the devices to use this command” appears, then you need to contact the official MIUI website with a request to unlock the bootloader to install the firmware, details can be read in.

Bottom line

Following these instructions, any phone with an unlocked bootloader can be flashed with a suitable operating system using MiFlash Android system, which will help to maximally adjust the phone to the needs of an individual user. Correcting software errors, restoring the “bricks” or simply replacing the internal components of the smartphone will help you use the phone for its intended purpose.

It was announced on April 19 and on April 28 the first batch of smartphones was already available for purchase. On at the moment You can now safely buy Mi6 with shipping to anywhere in the world in many online stores and in particular on trading platform AliExpress.

Many people who received a smartphone complain about the buggy firmware installed by sellers. Smartphones come with localized firmware number 8.2.0.2 NCAMIEC.

If you received a smartphone with such firmware, we recommend flashing it with global developer firmware. Below we will tell you how to do this. There is no need to unlock the bootloader.

How to flash Xiaomi Mi6 to global firmware?

To flash the firmware you will need the downloaded MiPhoneManager (Mi PC Suite) program.

1. Install this program on your computer, she will install it herself necessary drivers. The program may request an update; a blue arrow will appear in the lower left corner. We recommend updating the program;
2. We pick up the switched off smartphone and enter recovery mode (press the power button and volume up button). In recovery, select connection in MI ASSISTANT mode;
3. Now you can connect your smartphone, which is in recovery mode, to your computer. In the Mi PC Suite program, click on the arrow next to the Update button and select R.FLASH;
4. If everything was done correctly, the program will offer you to update its firmware to the global developer one;
5. After updating the firmware, we recommend doing full reset to factory settings.

Perhaps at about 80% of the update, your phone will reboot and the program will report a failure. Don't worry! The phone should boot normally into the global firmware.

With all its advantages in terms of the quality of the hardware components used and the assembly, as well as innovations in software solution MIUI, smartphones produced by Xiaomi, may require its user to flash or restore it. Official and, perhaps, the most in a simple way firmware of Xiaomi devices is to use the manufacturer’s proprietary program - MiFlash.

Firmware for Xiaomi smartphones via MiFlash

Even completely new smartphone Xiaomi may not satisfy its owner due to an inappropriate MIUI firmware version installed by the manufacturer or seller. In this case, you need to change the software, resorting to using MiFlash - this is actually the most correct and safe way. It is only important to strictly follow the instructions and pay close attention to the preparatory procedures and the process itself.

The examples described below use one of the most popular Xiaomi models - the Redmi 3 smartphone with an NOT unlocked bootloader. It is worth noting that the procedure for installing official firmware via MiFlash is generally the same for all devices of the brand that are built on the basis Qualcomm processors(almost all modern models, with rare exceptions). Therefore the following may apply when installing software for a wide range of Xiaomi models.

Preparation

Before moving on to the firmware procedure, it is necessary to carry out some manipulations related primarily to obtaining and preparing firmware files, as well as pairing the device and PC.

Installing MiFlash and drivers

Since the firmware method in question is official, the MiFlash application can be obtained on the device manufacturer’s website.

1. Download the latest version of the program from the official website by link from the review article:

2. Install MiFlash. The installation procedure is completely standard and does not cause any problems. You just need to run the installation package

and follow the installer's instructions.

3. Drivers for Xiaomi devices are installed along with the application. If you encounter any problems with drivers, you can use the instructions from the article: Installing drivers for Android firmware

Firmware download

All latest versions official firmware for Xiaomi devices are available for download on the manufacturer’s official website in the “ Downloads».

To install the software via MiFlash, you will need a special fastboot firmware containing image files for writing to the smartphone’s memory sections. This is a file in *.tgz format, the download link for which is “hidden” in the depths of the Xiaomi website. In order not to bother the user with searching required firmware, the link to the download page is provided below.

2. The page contains links to download two types of firmware: “ China"(does not contain Russian localization) and " Global"(needed by us), which in turn are divided into types - " Stable" And " Developer».

• « Stable"-firmware is an official solution intended for the end consumer and recommended by the manufacturer for use.
• Firmware " Developer"contains experimental functions that do not always work stably, but is also widely used.

3. Click on the name containing the name “ Latest Global Stable Version Fastboot File Download" - this is the most correct solution in most cases. After clicking, the download of the desired archive begins automatically.

4. Once the download is complete, the firmware must be unpacked using any available archiver into a separate folder. A regular one will do for this purpose. WinRar.

Transferring the device to Download mode

To flash firmware via MiFlash, the device must be in a special mode - “ Download».

In fact, there are several ways to switch to the mode required for installing software. Let's look at the standard method recommended for use by the manufacturer.

1. Turn off the smartphone. If the shutdown is carried out through the Android menu, after the screen goes dark, you need to wait another 15-30 seconds to be completely sure that the device has turned off completely.

2. With the device turned off, press the “ Volume+", then, holding it down, the " Nutrition».

3. When the “ MI", release the " Nutrition", and the button " Volume+»Hold until a menu screen appears with a choice of boot modes.

4. Press the button " download" The smartphone screen will go dark and it will stop showing any signs of life. This is a normal situation that should not cause concern to the user, the smartphone is already in “ Download».

5. To check the correct pairing mode between the smartphone and PC, you can refer to “ Device Manager» Windows. After connecting the smartphone in " Download"to the USB port in the section " Ports (COM and LPT)"Device Manager should show " Qualcomm HS-USB QDLoader 9008 (COM**)».

Firmware procedure via MiFlash

So, the preparatory procedures are completed, let’s move on to writing data to the smartphone’s memory sections.

1. Launch MiFlash and press the button “ Select" to indicate to the program the path containing the firmware files.

2. In the window that opens, select the folder with the unpacked firmware and press the button “ OK».

3. Connect the smartphone, switched to the appropriate mode, to the USB port and press the button “ refresh" This button is used to identify the connected device in MiFlash.

4. At the bottom of the window there is a firmware mode switch, select the one you need:

• « clean all"- firmware with preliminary clearing of partitions from user data. It is considered an ideal option, but it deletes all information from the smartphone;
• « save user data"- firmware with saving user data. The mode saves information in the smartphone’s memory, but does not protect the user from errors when operating the software in the future. In general, applicable for installing updates;
• « clean all and lock» - complete cleaning smartphone memory partitions and bootloader locking. Essentially, bringing the device to “ factory» condition.

5. Everything is ready to begin the process of writing data to the device’s memory. Press the button " flash».

6. Watch the progress bar fill up. The procedure can last up to 10-15 minutes.

7. The firmware is considered complete after it appears in the “ result» inscriptions « success"on a green background.

8. Disconnect the smartphone from USB port and turn it on by long pressing the “ Nutrition" The power button must be held until the " MI» on the device screen. The first launch takes quite a long time, you should be patient.

This is how Xiaomi smartphones are flashed using the generally excellent MiFlash program. I would like to note that the considered tool allows in many cases not only to update the official software of the Xiaomi device, but also provides effective way restore even seemingly completely broken devices.

Xiaomi devices are known not only for long-term support from the manufacturer, but also for a lot of modifications and custom firmware. You will learn how to install firmware on Xiaomi from this article.

Important! Instructions for flashing Xiaomi devices and other information are provided for informational purposes, for general purposes and are aimed at advanced users. Before flashing anything, be sure to check the information on additional conditions for each individual model. The author of the article and the site administration are not responsible for your actions.

Methods for flashing Xiaomi firmware with MIUI

This subsection contains methods for flashing firmware to smartphones and tablets that initially run on MIUI. The information is relevant if you plan to update the current firmware or install a custom, modified version.

The following firmware methods are distinguished:

1. Through the “Update” section – Three dots.
2. Using the Qualcomm Flash Image Loader (QFIL) program.
3. Installing firmware via Mi PC Suite.
4. Via TWRP.

Instructions for flashing the firmware through the “Update” section – Three dots.

The simplest and easy way, which does not require unlocking the bootloader. There is also no need for a computer, the Internet is sufficient.

Disadvantages of this method:

• Cannot be created backup copy systems.
• The method is not suitable for migrating from Chinese firmware to the global version.
• It is allowed to install only official firmware. You cannot install custom modifications.

Important! If you have Chinese firmware, you can only install Chinese stable or weekly firmware. If there is a global version, then only the global weekly or stable version. Installing the Chinese version on the global version or vice versa will result in a loading loop. The firmware should be installed with a serial number higher than the current system version.

Algorithm of actions:

If the connection with the phone is successful, a corresponding notification will appear in the program.

Click on the “Download” button to upload the firmware to your phone.

Wait for the message “Download Succeed” to appear, then disconnect the cable and turn on the phone.

Instructions for flashing firmware via Mi PC Suite

Installation is carried out using Mi PC Suite of the Chinese version and in Chinese. The method is suitable for installing official firmware with a locked bootloader. The program also allows you to remove the phone from cyclic reboots and restore it to its factory state.

Algorithm of actions:

Download the Chinese version of Mi PC Suite from the link.

Unpack the archives and place the driver folder in the utilities folder.

Download the official Fastboot firmware you need.

Unpack the archive with the firmware and move the contents to the folder with utilities and drivers.

Install drivers for Fastboot mode.

Unlock the bootloader. Also activate the “factory bootloader unlock” option in the developer section of the phone.

Important! If the bootloader is locked, unlocking is not necessary. Because while the firmware is being installed, the lock will be removed and then returned. In this case, be sure to activate the item in the section for developers: “Factory unlocking” – “(Enable OEM Unlock).

Open the folder with the firmware and run the automatic firmware script. For example, “flash_all.bat” will perform a flashing and delete data from the device.

Important! PROHIBITED flash the “flash_factory.bat” script, since modems and some partitions will be erased, which will lead to the loss of IMEI.

Do not touch the phone until the process is completed. The installation time is long, which is also affected by the power of the computer. When finished, the device will reboot. The first reboot takes longer.

Instructions for installing modified firmware

Important! Before flashing the firmware, disable the built-in locking systems - fingerprint, digital, graphic, etc. Back up your data. When using Google services, it is recommended to install Open gapps. The firmware should be flashed with a pre-unlocked bootloader and TWRP configured.

Algorithm of actions:

Place on a memory card necessary files: firmware, gapps, twrp-installer-tissot, magisk.

Launch TWRP.

Click on the “Wipe” button, then “Advanced Wipe”, where you can clear dalvick/ART Cashe, data and system. When installing Android firmware 9, instead of "Advanced Wipe" do "Format data". To confirm the action, swipe right.

Return to home screen and click on the “Install” button.

Specify the archive with the firmware. Immediately click on the “Add more ZIP” button, then specify twrp-installer-tissot. Flash the firmware by confirming the action with a gesture to the right.

Return to the main screen, where select “Reboot” and then “Recovery”.

Click on the “Install” button, where select “gapps”, then click on the “Add more ZIP” button, then add “magisk” and flash the firmware.

Important! When installing the Pixel Experience system, installation of gapps is not required, due to the presence of files in the system.

Upon completion of the firmware, reboot into the system.

Methods for flashing Xiaomi firmware with Windows

In the subsection you will find information on how to flash Windows 10 on Xiaomi Mi Pad 2.

Important! Windows installation 10 should be carried out if you have “pure Android” installed.

Algorithm of actions:

1. Download Windows 10 OS.
2. Unpack the system onto a USB flash drive formatted for file system FAT32.
3. Turn off the tablet and connect the flash card.
4. Turn on the device, after which the installation will begin.
5. At the end of the firmware, the tablet will turn off and you will need to turn it on manually.

Conclusion

From the article you will learn how to flash Xiaomi firmware with Android, Windows and MIUI. The most well-known and popular methods of installing official and modified assemblies are described. The methods presented are aimed primarily at advanced users. Therefore, do not start flashing if you are a novice user and better familiarize yourself with the flashing process.

If you notice any inaccuracies in the article, be sure to report them in the comments.

Detailed instructions for firmware Xiaomi smartphone Mi4c with new Russified, custom firmware from Google Play.

With firmware version 5.10.15, the cunning Chinese from Xiaomi began signing their firmware with a unique encrypted key. And this leads to the fact that, through standard (stock - mi) recovery, only original Anglo-Chinese firmware will be flashed, no matter what method! If you try to flash any other firmware through it, an error will appear signature verification failed!

Firmware for custom TWRP Recovery

Download drivers to connect your PC with Xiaomi phone Mi4c – MTK_USB_Al_0.9. 7, download and then install.

If you want to flash Xiaomi Mi4c with custom firmware or Russian firmware, you first need to install custom recovery in your smartphone.

Download custom recovery TWRP_Recovery 2.8.7.1 and MiuiPro or sMiui firmware for Xiaomi Mi4c

If anything, here is the stock (original recovery) for Xiaomi Mi4c – stok recovery Mi4c

Unzip the contents of the archive into a folder on drive “C”.

Run CMD in the folder (open the folder where the recovery file is stored, while holding down the shift key, press right button mouse over an empty space in the folder, open cmd here “open a command window”) in Win 10 open a command window
Switch the phone to fastboot mode (a hare wearing earflaps should appear on the smartphone screen repairing the android), to do this
Option 1: Turn off the phone and turn on the volume “-” key while holding down the key
Option 2: Via command (requires USB debugging mode enabled) – CODE “ adb reboot bootloader” and press “enter”

Then we flash our custom recovery TWRP_Recovery 2.8.7.1, for this we write the code

“fastboot flash recovery recovery.img”

and press the “Enter” key, after which the firmware process for the Xiaomi Mi4c smartphone will begin immediately

Installing firmware on Xiaomi Mi4c

Have you already downloaded the firmware? If not, download from the link at the beginning of this instruction.

Copy the downloaded firmware file to the smartphone’s memory
We go into recovery using one of the methods.
Method #1 Press and hold the power button and volume+ at the same time, as soon as the MI logo appears, release on, hold down volume+. We boot into the previously installed recovery.
Method #2 We look for the Update program icon on the smartphone’s desktop, go to -> click the three dots at the top (...) -> Select “Reboot to Recovery”.

Select the item Wipe—>Advanced Wipe and in the next window, check the boxes as in the screenshot, then swipe to the right. We return to the main menu and go to Install. In the top line we select the place where our firmware is located. “phone memory” or “SD card”
Confirm by pressing the button "OK"