Manual Internet connection setup. Manually setting up an Internet connection Setting up VLAN groups

In order to get to the router’s web interface, you need to open your Internet browser and type 192. 168.0.1 in the address bar, Username - admin, Password – admin(provided that the router has factory settings and its IP has not changed).

If your router interface is on English language, click on the checkbox at the top and select Russian.

At the end of each setting, do not forget to go to the top System and press Save.

Changing the factory password

1. In the field Enter New Password - enter a new password.
2. In the field Repeat the entered password - repeat the new password.
3. Then click the button Apply.

After this, the router will prompt you to re-enter its settings.

Setting up an Internet connection

Let's go to " Net» ⇒« WAN" If you already have created connections here, we recommend deleting them. To do this, check them and click the " Delete".

After that, click on the button Add.

Setting up a PPPoE connection

1. In the field Connection type: select PPPoE
2. In the field Interface choose Internet
3. Allow WAN direction- there must be a check mark
4. Username: Your login from the contract
5. Password: Your password from the agreement
6. Password confirmation: repeat password
7. Service name - you can leave it blank.
8. Authentication algorithm: Auto
9. Keep alive . Interval and dips- you can leave the existing values.
10. MTU
11. In the field Miscellaneous NAT And Firewall.
12. If your provider provides Internet television service, check the box Enable IGMP.
13. Click Apply.

Setting up an L2TP connection

1. In the field Connection type: select L2TP + Dynamic IP
2. In the field Interface choose Internet
3. In the Name column, enter the name of the connection. You can leave the existing value
4. Allow WAN direction: must be checked
5. : must be checked
6. In the field IP check that the boxes are ticked NAT, Enable IGMP And Firewall
7. Username: Your login from the contract
8. Password: Your password from the agreement
9. Password confirmation: repeat password
10. VPN server address:
11. Authentication algorithm: Auto
12. Keep alive– check the box for permanent connection
13. MTU– change the value to 1450 or less
14. In the field Miscellaneous check that the boxes are ticked NAT And Firewall.
15. Click " Save».

Configuring PPtP (VPN) while automatically obtaining a local IP address (DHCP)

1. In the field Connection Type: select PPTP+ Dynamic IP
2. In the field Interface choose Internet
3. In the Name column, enter the name of the connection. You can leave the existing value
4. Allow WAN direction: must be checked
5. Obtain DNS server address automatically: must be checked
6. In the field IP check that the boxes are ticked NAT, Enable IGMP And Firewall
7. Username: Your login from the contract
8. Password: Your password from the agreement
9. Password confirmation: repeat password
10. VPN server address: enter the address of the provider's VPN server
11. Authentication algorithm: Auto
12. Keep alive– check the box for permanent connection
13. MTU– change the value to 1450 or less
14. In the field Miscellaneous check that the boxes are ticked NAT And Firewall.
15. Click " Save».

Setting up Wi-Fi on the router

1. Go to the tab WiFi, select the item “ Basic settings"and set the desired name wireless point access SSID. We leave the remaining parameters as they are (see picture). After that, click “ Apply».

2. WiFi, select the item “ Security Settings" Select Authorization type(WPA2/PSK recommended), and then in the column PSK encryption key enter any password of at least 8 characters - this will help protect your wireless network from unauthorized access. Save your changes. WPA encryption - AES. After that, click Apply.

That's all: now you can try using the Internet via wireless Wi-Fi connection from a laptop, tablet or any other equipment.

Setting up IP-TV

Option 1. Select a port for the set-top box without specifying the VLAN ID

This way it is configured digital television Beeline, Dom.Ru, TTK and some branches of Rostelecom. This method is the simplest. Select a section from the menu Start - IPTV Setup Wizard. In the window that opens, click on the port to which the TV set-top box will be connected - it will be marked in green. As a rule, the 4th LAN port is used for this. Click on the button " Save" Now you can connect the set-top box to the 4th LAN port.

Option 2. With an explicit indication of the virtual network identifier VLAN ID

This method is used when multicast traffic is delivered to the subscriber device in a separate virtual network and is divided directly at the terminal equipment. The service is organized according to this principle in many branches of Rostelecom and Tattelecom. In this case, to configure the port you need to go to the section Additionally - VLAN. Here we click on the group “ LAN” and wait until its parameters open.

Once in the group settings, select the port into which the set-top box will be connected and uncheck it (in our example, we unchecked LAN port 3). Click on the button Save and go back to the section VLAN.

Now you need to click on the button Add" With this we will create a new group.

1. In the “Name” field we write the name of the group - IPTV, for example.
2. Check the “Allow” checkbox.
3. In the “Type” list, select “Transparent”.
4. In the Vlan ID field you must specify the virtual network identifier. My house uses 1601. Keep in mind that the identifiers are used differently on each optical ring and you can only find out which one is used on your home switch from the technical support of your provider.
5. Check the "Multicast" box.
6. We leave the rest as default.
7. Just note that in the “Untagged ports” list, the port that you removed from the “LAN” group should be checked.

Port forwarding/forwarding

Let's go to Firewall - Virtual servers. Press the button Add.

1. Name- enter any name.
2. Interface- select the interface that is responsible for connecting to the Internet. In our case, this is the pppoe interface.
3. Protocol- select the protocol you need.
4. External port start/end, Internal port start/end - enter the range of ports that you want to open.
5. Internal IP- IP address of the device to which requests will be sent
6. Click Apply.

Checking Internet connection status

Go to Status - Network statistics. In the sign, the Internet connection you created should be green and all columns in this row should be filled in.

Saving/restoring router settings

1. Select saving the current configuration. To save the current settings of the router, the settings file will be saved to the specified location on the hard drive.
2. To restore settings from a file, you need to click and select Loading a previously saved configuration into the device, specify the path to the settings file, then click the button.
3. To reset settings to factory defaults, press Factory settings.

Router DIR-615 is another representative of the line of devices D-Link DIR with modern speed support local network And cable internet. Its configuration is no different from the settings of similar compatible router models.

Review of the D-Link DIR-615 router

Included router DIR-615 includes: the device itself, two Wi-Fi antennas, a software disk, a power adapter, a LAN cable, and a user manual.

The DIR-615 package includes everything you need

The WAN port is located separately. Any cable Internet tariff is supported - up to 100 Mbit/s, the same speed in the local network via cable. However, Wi-Fi (communication between devices) is three times faster.

LAN ports are located to the side

The display panel is very informative - as on the vast majority of home routers.

Power, mode and network indicators DIR-615

The number of PCs and laptops in a cable network with DIR-615 can be easily increased from 3–4 to the required number using additional devices LAN-Hub and purely wired routers for every taste - from the simplest (other routers) to professional multiport devices.

Table: characteristics of DIR-615

Now the DIR-615 router will cost 1000 - 3000 rubles, depending on the store or retail chain, region of purchase, and delivery costs. Buying a DIR-615 router online on websites Chinese stores, for example, AliExpress, can cost three times cheaper (including free delivery to Russia within 60 days) than in domestic shopping centers.

Setting up the DIR-615 router

Before connecting the router to a PC or laptop, check that the network Wi-Fi adapters and LAN are configured to automatically obtain IP addresses - this will free you from configuration on each of the client devices.

Checking IP settings on a PC or laptop

On Windows 10, do the following.

Now go to the DIR-615 settings.

If the previous IP settings are still useful to you (you will connect to the Internet again through a router that does not have DHCP server) - use third party programs, which save configuration profiles, for example, NetSetMan.

Login to the router settings and change the password

After automatically obtaining IP addresses on a PC or laptop, many routers have a DHCP server enabled by default. For the convenience of users, all commands and menu items are translated into Russian.

The router will restart, you will enter its settings with a new password.

How to set up Wi-Fi on the DIR-615 router

After changing the password on the DIR-615 router, the second line of protection is checked - WPA-2 encryption on the Wi-Fi network.

The DIR-615 router will restart with the new settings of your Wi-Fi network. Use the WPA-2 key just specified in the router settings.

Setting up PPTP on DIR routers

As an example, here is an alternative web interface for routers of the DIR line, different from the “native” one released by D-Link and also suitable for the 615 model.

DIR-615 will restart and go online using PPTP. If the provider uses the PPTP protocol with the “Static IP” service, DNS addresses will need to be assigned manually.

Setting up L2TP on DIR-615

Like PPTP, L2TP is an evolution of encryption from PPTP. VPN networks. Both algorithms are used, for example, if you urgently need to “hide” from Internet censorship, for example, to bypass the torrent ban in force in your country. Many Russian providers, starting from Rostelecom, support both of these types of traffic encryption.

As an example, here is the same proprietary DIR-615 web interface.

1. Give the command “Settings - Internet - Manual setting Internet connections."

   Click the button to go to manual L2TP setup

2. Select the connection type (L2TP connection). As an example, communication without the “Static IP” service.

   To continue, go to the following DIR-615 parameters

3. Enter the username and password from the contract, server name. As an example, connect to GPON (fiber optic Internet) from Beeline.

   Also enter all L2TP parameters required by the provider

4. Enable auto-connect when the connection is lost and enter an MTU value less than 1450. Click the “Save settings” button. If you connect to the “Static IP” service, you will receive from Beeline (or another provider) the main gateway IP and DNS address.

The router will restart with the new L2TP connection settings and go online automatically.

Setting up PPPoE on routers

Communication via PPPoE, being high-speed, requires a username and password - unless you have activated the “Network access without settings” service. The latter is relevant for cellular providers that use client identification using the IMSI SIM card - it is not required there, as with cable providers, login and password from the contract.

As an example, here is another alternative web interface from D-Link, different from the classic gray-orange one.

In general, the B-Link company, releasing routers of different modifications belonging to the same model, uses different designs and noticeably different functionality on them, although the essence of all operations does not change.

DIR-615 will automatically go online after restart.

How to configure static IPs on DIR-615

Static IP settings may not require entering the login and password from the contract.

1. Give the command “Network” - “WAN” - Add button to create a new connection profile.

   Adding a new Static IP connection profile

2. Select port 5 and enter the connection profile, assign an MTU less than 1450, check that the MAC address is correct.

   Check the same initial parameters for static IPs

3. Select a static IP connection and enter the gateway IP and DNS received from your provider, click the “Save” button.

   IP and DNS addresses are issued by the provider

4. Give the command “System - Save settings”.

   Click on the menu item to save the setting

DIR-615 will start with new settings and reconnect to the Internet.

Port forwarding on DIR-615 routers

Port forwarding between routers is necessary, for example, to optimize the speed of torrent distributions, configure local game server etc. The latter is also important in the local city network - on tariffs with high-speed Internet up to 100 Mbit/s, but with intra-city (or intra-campus, for example, between several nearby university buildings or dormitories) speeds of up to one or more gigabits per second .

As an example, the blue (Russified) D-Link web interface.

1. Give the command: “Firewall” - “ Virtual servers" - "Add" button.

   Unlike the regular connection profile, the server connection is configured differently

2. Select a custom profile template, enter a connection name, select a protocol external connection to the Network (for example, you are using a PPPoE connection). Select a protocol, for example TCP/IP.

   Enter the required values ​​for port forwarding

3. Specify the range of external and internal ports. If there are communication errors on one of them, the router will automatically try port numbers in these value intervals until a working one is found.
4. Assign an internal IP address to a server or router on a local or intracity network that acts as a server to which you want to open these ports. Click the “Save” button (or “Change” if you are changing an existing connection profile). You will have a new/changed connection profile with port forwarding.

   Port forwarding and DIR-651 is completed

5. Click the “Save” button again.

You can restart the router and check the functionality of the forwarded connection.

Setting up IP television on the DIR-615 router

The settings for the IP television service are the same for many routers in the DIR line. The service must be activated at the provider's tariff.

The port allocated for IPTV cannot be used for regular Internet. Assign one of the free ports of the DIR router for IPTV, and not another port that includes a LAN hub with several cable connections to different PCs - otherwise these computers working in conjunction on this port will be programmatically cut off from the Network.

Turn on your set-top box and connect it to the selected LAN port. The monitor should display a list of IPTV channels.

Setting up LAN and DHCP on the router

The DHCP server distributes local IPs to all gadgets and PCs that are not configured to specific values ​​on your local network. As an example, here is the classic web interface.

The router will restart with the new DHCP settings, your PCs and gadgets will reconnect, and then Internet access will be enabled on your network.

Setting up DIR-615 as a repeater

Repeater mode allows you to expand the coverage area of ​​your Wi-Fi network. Like any real 3G/4G repeater, a virtual Wi-Fi repeater allows you not only to solve the problem of the “last house/block/mile” with coverage, but also to create a full-fledged wireless local network of any topology (chain of routers, star, tree ", "cloud" or "ring" of devices) with one or more Internet access channels. The result is a full-fledged network in the image and likeness of a cellular network - with a much smaller radius of “cells” (routers), without cable or fiber optic lines to each of these “ base stations", without phone calls and SMS/MMS, but not inferior in Internet speed to 3G-based technologies (UMTS).

Virtual hotspot and repeater modes are supported by almost all modern Android gadgets that have Wi-Fi technology Direct (“Internet distributor”) and third party application, obtained from Google Play or from third party developers. No problem matching Wi-Fi router with a tablet or smartphone (and vice versa), operating in repeater mode.

The Wi-Fi repeater mode is of practical interest to the most sophisticated users. As an example, here is the classic D-Link interface.

1. Give the command “Settings - Wireless network” and select bridge mode with an access point (this is a virtual repeater). In others D-Link firmware DIR can be “Client and Access Point” mode.

   The DIR-615 router is configured a little differently than routers of other brands

2. Enter the Wi-Fi network name. Select the channel manually - on which the source router is broadcasting. When automatically selecting a channel, turn on the Auto Channel Scan feature.
3. If you are interested hidden networks Wi-Fi (these routers do not broadcast their SSID), MAC addresses and WPA-2 settings are known to you, check the “Enable hidden wireless networks” option.
4. Select the Wi-Fi security value - “Enable enhanced wireless security” if the router you are looking for uses this level of security. You can also use MAC address locking to source routers if you disable this enhanced Wi-Fi relay security.

   To save the DIR-615 settings, use the “Save” button, to preload those already saved in separate file settings - the file path form with the "Browse" button and the "Update settings" button; to reset unsuccessful settings - the "Restore" button. After each update of the settings, the router restarts.

   DIR-615 firmware update

   As an example, here is another variant of the DIR-615 interface. Download the updated firmware file from the website of the router manufacturer DIR.

   
   

   The router will connect to the Internet, provided that the default settings are acceptable with your provider. This happens when the provider itself simultaneously supports several protocols (without connecting additional services) - dynamic IP, PPPoE and PPTP/L2TP encryption, leaving the user with a choice.

   Restarting DIR-615

   Restarting the DIR-615 router is carried out either by pressing (and holding for half a minute) the well-known reset button located on the back, near the LAN sockets, or through the web interface.

   It is often faster to restart the router through its settings, if the actions have been worked out, under a successful set of circumstances, than to hold this very button with a sharp edge.

   Give the command: “System” - “Restart” (or “Save and restart” if you are changing the settings at the same time).

   Initializing DIR-615 restart

   The router will restart and go online again.

The D-Link DIR-615 router is designed for building a local computer network with Internet access in a small office, apartment or private household. Thanks to the presence of four LAN ports and a point Wi-Fi access, it can be used to provide both wired and wireless connection. And the combination of these features with a low price makes the DIR-615 model especially attractive to users. To ensure safe and uninterrupted operation of the network, the router must be configured correctly. This will be discussed further.

Preparing the D-Link DIR-615 router for operation takes place in several steps, common to all devices of this type. It includes:

Having completed all the described steps, you can proceed to directly configuring the router.

Setting up the router

All router settings are carried out via the web interface. For the D-Link DIR-615, it may differ slightly in appearance depending on the firmware version, but the main points are common in any case.

In order to enter the web interface, you must enter the router's IP address in the address bar of any browser. In most cases this is 192.168.0.1. You can find out the exact default settings by turning the router over and reading the information located on the tab in the middle of the bottom of the device.


There you can also find out the login and password for connecting to the device, and other useful information about it. It is to these parameters that the router configuration will be returned in the event of a reset.

By logging into the router's web interface, you can begin setting up your Internet connection. The device firmware provides two ways to do this. We will tell you more about them below.

Quick setup

To help the user successfully cope with setup and make it as simple and fast as possible, D-Link has developed special utility, which is built into the firmware of its devices. It's called Click'n'Connect. To launch it, just go to the appropriate section on the router settings page.


After this, the setup proceeds as follows:

1. The utility will prompt you to check whether the cable from the provider is connected to the WAN router port. Once you are sure that everything is in order, you can press the button "Next".
   
   
2. On the newly opened page you will need to select the connection type used by the provider. All connection parameters must be contained in the agreement for the provision of Internet access or in additions to it.
   
   
3. On the next page, enter the authorization data provided by the provider.
   
   
   Depending on the previously selected connection type, additional fields may appear on this page, where you will also need to enter data from the provider. For example, if the connection type is L2TP, you must additionally specify the VPN server address.
   
   
4. Review the main parameters of the created configuration again and apply them by clicking on the corresponding button.
   
   

After completing the above steps, you should be able to connect to the Internet. The utility will check it by pinging the google.com address, and if everything is in order, it will move on to the next step - setting up a wireless network. During this process you will need to perform the following actions:

The final step in quick setup D-Link DIR-615 router is setting up IPTV. It consists in the fact that you just need to specify the LAN port through which digital television will be broadcast.


If IPTV is not needed, you can skip this step. The utility will display a final window in which you need to apply all the settings made.


After this, the router is ready for further operation.

Manual setting

If the user does not want to use the Click’n’Connect utility, the router firmware provides the ability to do this manually. Manual configuration is designed for more advanced users, but for a novice user it will not be difficult if you do not change parameters whose purpose is unknown.

To set up an Internet connection, you need to:

It should be noted that access to detailed settings Internet connections can also be obtained from the Click’n’Connect utility by moving the virtual switch at the bottom of the page to the position "Details". Therefore, the difference between quick and manual settings comes down only to the fact that in quick settings, the additional options.

The same can be said about setting up a wireless network. To access them you need to go to the section "Wi-Fi" router web interface. The further procedure is as follows:

At this point, the wireless network setup can be considered complete. The remaining submenus contain additional parameters that do not need to be changed.

Security Settings

Compliance with certain safety rules is an essential condition for successful work home network. It should be noted that the settings that are present in the D-Link DIR-615 by default are sufficient to provide its basic level. But for those users who pay increased attention to this issue, it is possible to configure security rules more flexibly.

The main security parameters in the DIR-615 model are set in the section "Firewall", but during setup you may need to make changes in other sections. The principle of operation of a firewall is based on traffic filtering. Filtering can be done both by IP and MAC address of devices. In the first case it is necessary:

Filtering by MAC address is much easier to configure. To do this you need to enter the submenu "MAC filter" and do the following:

If necessary, the D-link DIR-615 router can also restrict access to certain Internet resources. This is done in the section "Control" device web interface. To do this you need:

In addition to those listed above, the D-Link DIR-615 router has other settings, changing which affects the level of security. For example, in the section "Net" in the submenu "LAN" you can change its IP address, or disable the DHCP service.


Using static addresses on a local network with a non-standard router IP address will make it much more difficult for unauthorized persons to connect to it.

To summarize, we can conclude that D-Link router DIR-615 is good choice for the budget consumer. The features it provides will suit most users.

Insert the cable that was installed into the room by your Internet provider into the “Internet” connector. Insert an Ethernet cable into any of the four “LAN” connectors, and connect the other end to the computer from which the router will be initially configured. Connect the power supply plug to the “5V - 2.5A” slot. After these steps and plugging in the router, the hardware connection of the router is completed, and you can proceed to setting it up through the router control panel.

To do this, turn the router upside down and pay attention to the sticker with instructions. In the lower right corner (section “Default router settings”) the standard information for logging into the device’s web interface is indicated. The “IP” line contains the address that must be entered in any Internet browser to open the device control panel. “Username” is the standard user name, “Password” is the default password. In the case of this router standard password is missing and the field for entering it must be left blank. However, other firmware versions may specify a standard password, such as "admin".

Devices with different versions firmware. Therefore, the router's web interface may differ. The instructions will describe the setup on one of the latest firmware versions - 2.5.4.

Logging into the control panel and setting up the Internet

After you go to the address indicated on the bottom panel of the router and enter the data account, the “Information” tab will open. It will contain information about the D-Link DIR-615 model and connection information.

Pay attention! The message “Wireless network is not secure” appears in the top right corner of the page. This means that the Wi-Fi connection is made without authorization, that is, the network is open. It is highly recommended that you install encryption and set your password in the following steps of setting up your router.

Check your Internet connection by opening any website. If the connection is not established, you need to configure the connection on the D-Link DIR-615. Go to the menu item “Network -> WAN”. Next, click the “Add” button to enter connection parameters.

In this menu you need to select the connection type. Depending on it, a series will be displayed additional settings and input fields. You can read all this information in the agreement you entered into with your Internet provider.

After entering the connection settings and clicking the “Apply” button, the system will ask for your consent to delete the existing connection. Click “OK” to replace the connection and move to the next setup step.

Wi-Fi setup and system settings

To set up a wireless network, select “Wi-Fi -> Basic settings” in the main menu of the web interface. Here you can set parameters such as SSID, country, channel, wireless mode. SSID is the name of your Wi-Fi networks. It may consist of letters, numbers and special characters. The value of the “Channel” drop-down list determines the frequencies at which the router will broadcast. In most cases it is advisable to leave the channel selection on automatic. “Wireless Mode” defines the Wi-Fi network specification. The most latest version as of the date of publication of this article - 802.11 B/G/N mixed. It ensures the network operates at maximum speed (the standard implies speeds of up to 600 Mbit/s).

Next, go to the next tab in the menu - Wi-Fi security options. In the list of network authentication methods offered by D-Link DIR-615, it is recommended to select “WPA-PSK/WPA2-PSK mixed”. This is the most secure encryption method, maintaining a strong network key and backwards compatible With previous version WPA-PSK protocol. Keep in mind that encryption not only limits your network connection, but also protects data transmitted over Wi-Fi. If a network is left unencrypted, all information transmitted within its boundaries can be intercepted. Leave the WPA encryption settings at their default settings, as they are optimal for non-professional users.

When the Internet is connected and Wi-Fi encryption settings are set, go to the “System -> Administrator Password” menu. In it you can protect the entrance to the router’s web interface with your own password. After filling in the new password and confirming it, click the “Apply” button.

Most providers suggest using D-link routers, especially the Dir-615 model. Before using the device to access the Internet, you must configure it correctly, setting not only the basic network parameters, but also passwords for authorization and connection to it. This can be done quite easily and quickly on your own, without involving specialists.

Connecting to a computer

By cable

Using Wi-Fi

1. Go to "Control Panel".
2. Open the tab "Network and Internet".
3. Find "Network and Sharing Center".
4. Next select "Connect to the network". A window will appear on the right.
5. Find the network called "Dir-615" and click on the button “Connect.”
6. If the system asks for a password, you need to look it up on the sticker on the router. The value is indicated in the WPS PIN line.

Reset settings

This is quite easy to do. You need to take a toothpick or a needle, turn on the device and find the “Reset” button on the back, hidden under the body. Then click on it and hold for a few seconds. After this, wait for the router to reboot.

Login to the panel

1. Open the browser, you can use the standard Explorer, or you can use the one you use all the time.
2. In the address bar we type 192.168.0.1.
3. Load the settings page by clicking on the arrow at the end of the line or the “Enter” key.
4. A page with an authorization window will appear in the browser.
5. In line Username enter “admin”.
6. Leave the Password line empty.
7. In some cases the value may be specified. Then we use the standard password “admin”.

Changing the password

1. Open the tab « Tools» located at the top of the panel.
2. On the left side we find and open the item « Admin» .
3. In sections « Admin Password» And « User Password» enter the password you created in the line « Password» And we confirm it in the line “Verify Password» .
4. Save changes using the button "Save Settings".

Network setup

• login;
• Internet access password.

This data is indicated in the service agreement or in network card issued to you by your provider.

1. Select the tab in the top menu "SETUP".
2. On the left we open the item "Internet".
3. We go down and find the button "Manual Internet Connection Setup". Click on it.
4. A new window should open in front of us called "WAN".

• for the line " My Internet Connection is" select from the drop-down menu "Russia PPPoE (Dual Access)";
• User name– enter the login specified in the papers;
• Password– enter the password specified in the same document;
• Verifi Password– confirm the password.

The system will ask you to wait about a minute, after which you need to click on “Continue” and log in again.

We configure everything in the same menu "Setup".

• Wireless Network Name– enter the name of the network. May contain both numbers and letters of the Latin or Cyrillic alphabet.
• 11 Mode– select a value in the drop-down list « Mixed 802.11 n, 802.11 g, 802.11 b» ;
• Channel Width– install "Auto 20/40 MHz";
• Security Mode – open the list and install « WPA – Personal» .

• WPA Mode– choose "Auto (WPA or WPA2)";
• Cipher Type– set the value « TKIP and AES» ;
• Pre- Shared Key– enter the password you created. Must consist of 8 characters. You can use letters and numbers.

Setting up TTK D-link Dir-615

To configure, select “Advanced settings” at the bottom of the panel.

Network connection

To do this:

1. Open the installed connection type and scroll down the page.
2. Finding the button "Delete" and click on it.
3. After deleting we find ourselves again on WAN page and press the button "Add".
4. Fill in the lines in the window that opens as follows: Connection type– select PPPoE, and Name– indicate the network name;
5. Filling out the fields "Username" And "Password" according to the data specified in the contract.
6. At the very bottom of the page in the section "Miscellaneous" Check the boxes next to the following items – NAT and firewall.
7. Click "Apply."

Wi-fi network operation

• SSID– write the network name you created;
• for parameter "Channel" select “Auto”;
• for parameter "Wireless mode" set the value to “802.11 B/G/N mixed”.

• Network authentication– enter the name of the network.
• PSK encryption key– at this point we specify the password for connecting to the Internet via Wi-Fi.

If you want your Wi-Fi signal to become stronger, read.

Video tutorial on setting up a router