Installed windows 10 no sound. Deactivating sound effects

Problems with sound performance on Windows 10 are not uncommon, especially after updates or switching from other versions of the OS. The reason may be in the drivers or in a physical problem with the speaker, as well as other components responsible for sound. All this will be discussed in this article.

The causes of sound problems vary. You may need to update or reinstall the drivers, or maybe replace some components. But before you begin performing the manipulations described below, be sure to check the functionality of your headphones or speakers.

Method 1: Adjusting the sound

The sound on your device may be muted or set to minimum. This can be fixed like this:

Method 2: Update Drivers

Your drivers may be out of date. You can check their relevance and download the latest version using special utilities or manually from the manufacturer's official website. The following programs are suitable for updating: DriverPack Solution, SlimDrivers, Driver Booster. Next, we will consider the process using DriverPack Solution as an example.

Method 3: Run the troubleshooter

If updating the drivers does not produce results, then try running an error search.

Method 4: Rollback or remove sound drivers

If problems start after installation Windows updates 10, then try this:

Method 5: Check for viral activity

Perhaps your device has been infected and the virus has damaged certain software components responsible for sound. In this case, it is recommended to check your computer using special antivirus utilities. For example, Dr.Web CureIt, Kaspersky Virus Removal Tool, AVZ. These utilities are quite easy to use. Next, the procedure will be discussed using the example of Kaspersky Virus Removal Tool.

Method 6: Enable the service

It happens that the service that is responsible for sound is disabled.

Method 7: Switching Speaker Format

In some cases, this option may help.

Method 8: System Restore or OS Reinstallation

If none of the above helped you, then try restoring the system to a working state. You can use a restore point or a backup.

1. Restart your computer. When it starts to turn on, hold down F8.
2. Follow the path "Recovery" - "Diagnostics" — "Advanced options".
3. Now find "Restore" and follow the instructions.

If you do not have a restore point, try reinstalling the operating system.

Method 9: Using the Command Line

This method can help with wheezing sound.

Method 10: Turn off sound effects

If this doesn't help, then:

This is how you can return sound to your device. If none of the methods worked, then, as was said at the very beginning of the article, make sure that the equipment is in working order and does not need repair.

What to do if there is no sound on your Windows 10? Firstly, do not despair and do not blame the manufacturer of the acoustic equipment and the expansion cards of the same name that are in the car.

If for no apparent reason the broadcast disappears after reinstallation or for some other completely unknown reason, there can be two sources: drivers and force majeure.

Driver problems

See what is used as a base. If these are not speakers, but, for example, HDMI from a TV that is not currently connected, change the source to the main one.

If these are speakers, then select the item, click on properties and carefully look through all the tabs in this section.

Unnecessary or unknown effects should be disabled out of harm's way until the problem is resolved.

In the case of installed software from any card manufacturer (for Asus Xonar, for example), also carefully review all tabs to see if any key parameters are enabled/disabled.

Suddenly the system switched playback to the optical output, and the speakers were powered by a banal 3.5 cable.

• Windows Audio

Open the device manager by entering the command devmgmt.msc. You need a tab related to sound.

Right-click on it, look for properties and look at what is written in the column with the device status.

If everything works fine (as written), then use the initial instructions at the top, which talk about the correct drivers after reinstallation. Download and install them.

But if something is wrong, also look towards the driver. The system often makes it clear exactly what steps need to be taken.

Also try administration. Go to the control panel and find the “services” item, where you will find Windows Audio.

Look that in the “startup type” it said “automatically”, and not some other item.

Connection via BIOS

An extremely rare problem that sometimes occurs is disabling it directly in the BIOS. The built-in sound card may simply not work.

To solve the problem related to this, you need to know the model of your MP, BIOS version and other parameters.

As a last resort, it’s better to ask your manufacturer’s support about this. motherboard/laptop. They should be notified of the problem.

The most common problem is with the hardware. Most often, the wires remain visible, which is why pets “feast on” them.

Less often, the person himself touches the cable. It’s much more serious if the acoustics themselves don’t work.

As strange as it may sound, it’s worth smelling it to make sure nothing is burned.

Software errors are “treated” at the level of reinstalling drivers. It is advisable to download them not from the developer’s website, but from the website of the manufacturer of your MP.

If the board is separate, then find out the exact model and go to the manufacturer’s resource.

No sound after Windows 10 update

Even though Windows 10 updates are designed to improve system performance, they don't always succeed. Sometimes after updates, problems occur with your computer hardware. If after Windows updates 10 the sound does not work, then you need to watch this video tutorial.

When installing or updating the operating system on their computer or laptop, many users encountered a number of problems, including lack of sound. Let’s take a closer look at how to fix this error and what to do if the sound disappears on Windows 10.

Sound disappears on Windows 10 - how to restore

Most users have still not been able to get the sound back when updating the operating system; it either disappears or appears again. The whole point is that the sound settings have gone wrong. It would seem that everything is extremely simple, you need to reinstall the drivers responsible for sound playback, and everything will work out. But, as practice has shown, this step is sometimes not enough.

How to fix the error and get the sound back:

• Make sure that everything is in order with the speakers, the cord is not damaged, and the speakers are connected to a special connector.
• On the taskbar, right-click the mouse to select the “Menu Playback Device” tab in the lower right corner of the screen.
• The next steps will be as follows: select the device that is in at the moment actively. Naturally, these will be speakers.
• You need to left-click on a line to open the menu.
• Next we go to " Additional settings"and here you need to change some values ​​in the column settings. Instead of Hz44100 you need to put Hz 192000, with the same bit values ​​- 24.
• If after this manipulation nothing works, there is no sound, then you need to choose a different tactic.

How to get sound back on Windows 10

If nothing works the first time, try again:

• In the task menu, launch the device manager.
• Once it starts, you need to go to the “Audio Devices and Sound” tab.
• On the current audio playback driver you need to click right click mouse and select the “Delete” option.
• Now select the “Device Search” tab and this way the driver will be updated and it will be installed automatically.
• At this point, all actions can be considered completed, the speakers should work and reproduce sound without interruption.

There is also a backup option when the system stubbornly refuses to restore the audio driver. Then you need recently installed drivers Install the sound playback cards again, you just have to look for them on the manufacturer’s website.

SovetClub.ru

No sound on laptop or computer - What to do!

When starting the operating system, did you lose sound on your laptop, and instead of the usual melody, there was deathly silence? Let's figure out why the sound on the computer does not work.

How to restore sound

How can I get my PC to play audio again? To return the “voice” to our device, we first need to understand why the sound on the laptop does not work. There can be a lot of reasons, starting with software problems and ending with hardware failures. Let's look at the most common ways to restore sound on a laptop.

Volume controls

The easiest way to turn on sound on a laptop is to use the volume controls. In the lower right corner, right on the taskbar, there is an icon in the form of a speaker. Click on it. This will open the mixer, which is designed as a slider. It is not difficult to guess that the higher it is, the louder sound. For normal playback, it is enough for the slider to be located at least in the middle.

If you have a playback prohibition icon in your mixer, this means that the sound in your system is completely muted. To fix this, just click on this icon. After this, the sound should return.

If the sound has disappeared in a specific program (for example, music does not play through the browser), then this can be fixed. Just right-click on the icon and a drop-down list will open. In it you need to select the “Open volume mixer” item. A new window will appear containing sliders for specific programs. To turn on the sound in some utility (the same browser), drag the slider at least to the middle.

You can also use this menu to mute an application. For example, you don’t want to be distracted by sound banners on websites while surfing the Internet. What to do to make the sound disappear Windows computer 10 in the search engine? Just move the slider located opposite the browser icon to the very bottom.

Playback Devices

The playback devices may be to blame for the lack of sound on the laptop. Don't be alarmed, because this doesn't mean the speakers aren't working. Maybe operating system he simply doesn’t see them. To fix this, right-click on the already familiar icon and select “Playback devices” from the list. A new dialog will start. It contains a list of devices that are designed to reproduce information. We are interested in the “Speakers” item. We find it and make sure that there is a green check mark next to the column image.

If it is missing, then it becomes clear why the sound on your computer has disappeared. The playback device is simply not synchronized with the PC. To fix this, right-click on the speaker image. In the list that opens, select “Set as default.” If the speaker image is highlighted in gray, and the device itself has the “Disabled” status, then click on the icon and select “Enable”. Once you've done this, be sure to set your device to default mode.

It's a completely different matter if the speakers are not displayed at all in the list of connected devices. If you encounter such a situation and don’t know how to restore sound on your computer, just click on a free area of ​​the window. This will open a dropdown list. In it you need to find the option “Show disabled devices” and click on it. The speakers will then appear and you can connect them.

Checking the sound card

What should I do if there is no sound on the computer even after carrying out all the procedures described above? You need to check the sound chipset, because perhaps it is the root of the problem. So, to make sure the chipset is working, do the following:

There are times when there is nothing in the “Sound Devices” section. If you encounter a similar situation, then try looking for the sound chipset in “Other devices”. If you find your audio device there, and there is an exclamation mark next to the device, then the drivers have disappeared from the audio chipset. To restore the sound, you will have to reinstall them. We'll talk about this in the next section.

Reinstalling drivers

The first thing to do is determine what drivers are needed for the audio adapter. In the Device Manager window, double-click your sound card. After this, a new dialog will open in which you need to go to the “Information” section. There, near the “Properties” inscription, click on the drop-down list and select “Equipment ID”. After that, copy the first entry into the “Value” field.

Open your browser and go to a site called devid.info. This Internet resource is a huge database of drivers for various devices. To find firewood for your sound card Paste the previously copied text into the search bar. The website will automatically select suitable firewood for you. All you have to do is find the latest program that fits your operating system. Once done, download the selected driver.

If the driver you downloaded is in .exe format, then simply run it and follow the installer's recommendations. If the firewood has a different format, you will have to resort to alternative way installations. Go to the “Task Manager” again and look for the sound card there. Open its properties and go to the section called “Drivers”. There will be an “Update” button. Click on it and then click on “Perform Search”. Then click on "Browse" and specify system utility path to previously downloaded drivers. The installation process will begin. After installing the drivers, everything should return to normal.

Checking the connection

If the sound problem is still not resolved, then you should check the connection of your playback devices. If you are using a computer, carefully inspect system unit and make sure the speaker wire is in the correct connector. As a rule, it has a green color. To be on the safe side, pull out and reinsert the wire.

If you are using a laptop, make sure that the green connector is not occupied by any devices. For example, many people insert headphones there. If they are currently in the green slot, then simply pull them out from there. After this, sound playback will be carried out through the built-in speakers of the laptop.

It would be a good idea to check the peripherals. Perhaps the reason that there is no sound on a Windows XP computer is bad hardware. Check your headphones and speakers to ensure they are working properly. To do this, connect the devices to another PC or laptop.

Windows Audio Service

Sometimes the reason why sound disappears on a Windows 7 computer can be a failure in system services. Therefore, if you encounter problems with audio playback, make sure that no errors have occurred. To do this:

Setting up sound via BIOS

If you have recently changed settings in the system, then it is possible that there is no sound on your Windows 7 computer due to BIOS settings. Most often, people inadvertently disable the function that is responsible for broadcasting audio. To fix this, you first need to enter the BIOS. To do this, restart your computer and when it starts to turn on, press F2 on your keyboard.

After this, the BIOS menu will open. We are interested in the Advanced tab. We go there, after which we look for High Device Configuration. Opposite this characteristic should be the inscription Enabled. If it says Disabled, change this parameter, and then fix the changes made by pressing F10.

System Restore

When the sound on the computer disappears, and you know exactly when it happened, then to fix the problem, you can try to restore the OS. If the sound stops working after manipulation by the user or program, then this should help. In extreme Windows versions There is a “System Restore” function. This is what we will use. So, to restore the OS, you need to:

Viruses

Perhaps while downloading a movie or a new game you caught some kind of virus. To fix this, pay attention to the operation of the system as a whole. There may be other signs that there is malware on your PC. Frequent freezes, slow computer operation, frequent antivirus warnings, advertising banners - all this indicates viruses.

To combat malicious software, you need to resort to the help of modern antiviruses. Scan your PC and remove everything suspicious files. I would recommend you antivirus Dr. Web. It scans the system thoroughly. At the same time, you can download the antivirus program onto your PC completely free of charge.

Reinstalling the operating system

If after all the actions taken there is no sound on Windows 10, then you need to resort to heavy artillery. It is necessary to demolish the old system and reinstall Windows. If you nevertheless decide to take this radical step, then do not forget to save all important data on some storage device or cloud service.

In addition, download all the drivers to the USB flash drive in advance. After all, after reinstalling Windows you will have to install them again. When you install drivers, start with the audio chipset.

Conclusion

What to do if there is no sound on your laptop? Use the methods described above and most likely you will be able to solve the problem yourself. If nothing helps, and even after complete demolition of the system the sound does not appear, then there is only one way out - to carry the “patient” to service center. Most likely, the problem lies in the hardware. Perhaps the sound card or motherboard is broken. In any case, it will not be possible to deal with a hardware failure without specialized knowledge and special tools. Therefore, you will have to entrust your computer to a specialist.

droidov.com

Why is there no sound on a laptop with Windows 10? Possible causes and their elimination

Greetings, dear readers.

You can often find messages on the Internet from users who express their dissatisfaction with the fact that they suddenly lost sound on their Windows laptop 10. And they have no idea why this happened. Consequently, they don’t know how to deal with the problem. In this case, the disease manifests itself with different “symptoms”. Some have no reproduction at all. For others, only through the front panel. In general, there are many signs. In the following article I will talk about the most common of them, and also share solutions.

A simple and quick solution (to contents)

Many people, immediately after they lose sound on their computer, begin to panic. They don't know what to do or how to fix this situation. As mentioned above, the solution directly depends on the reason. But there is the simplest option that will allow you to return everything to its place without careful disassembly. To do this you need to do the following:

Next to the clock (usually in the lower right corner) we find a speaker icon. We call on it context menu.

Select “Detect problems...”. The system will launch the wizard. Next, options will appear, following which you can correct the situation.

Updates(to contents)

If problems started after updating the OS, perform several steps:

Driver(to contents)

One of the most common variants of the disease is the absence of sound after an update, recovery, or even clean install operating system. In this case, most often the corresponding pictogram has a familiar appearance. Having gone to the “Device Manager”, we find out that here, too, the icons are in order and, in general, the whole direction “works as expected”.

At the same time sound card may be called “High Audio...” or something similar. It is this situation that primarily indicates that the system contains incorrect drivers. This can often be seen in Asus laptops, as well as computers with Realtek and VIA HD chips.

The solution to the situation on all devices is to install a normal driver. To do this, you need to perform a chain of actions:

We go to the search engine, where we enter the model of the laptop or motherboard. This can be found in the Everest app or similar. Moreover, initially it is better to go to official page the entire device, not a specific node.

Next, you need to select the appropriate utility in the support section and download it. It is worth considering that it may be for previous versions of operating systems - this is normal. But you can’t confuse the bit depth. You can view it in “Properties” when you call them on “Computer”.

Installing a new driver.

Unfortunately, this doesn't always help. This way the system shows that the entire process was successful. But in fact, nothing has changed. Why is this happening? This situation is due to the fact that the system decided to leave previous version, because, in her opinion, it is newer or better. This is indicated in the “Device Manager” in the properties of the component.

But don’t worry, there is a solution: Right-click on the installer and select “Properties”. Go to the “Compatibility” tab and select the previous OS version. It could be Win 7 or 8 instead of 10.

The following option may also help:

Services(to contents)

In some situations, audio services may not respond. In most cases, this is due to the activity of viruses on the device. Based on this, the following chain of actions is built:

Solution for Asus laptops(to contents)

Separately, I would like to talk about a solution to the problem on laptops from Asus that have a Via Audio chip installed. It is on such devices that the above problems most often occur. Usually the disease is accompanied by the appearance of error 0x887c0032. The solution is this:

Go to “Device Manager”. We are interested in the entire “Audio outputs and inputs” item.

We select each line and delete it along with the drivers (of course, if the system offers this).

Go to “Sound Devices”. We do the same. We leave only HDMI. A message should appear saying “Sound devices are not installed.”

We go to the Internet and download Via Audio from the official Asus resource.

We set compatibility with Win 8.1 or 7. Run as administrator.

Additional parameters (to contents)

Sometimes users simply forget to view additional settings in the sound menu. And it’s better not to forget about this:

The sound became quieter automatically or interference appeared (to contents)

If playback still occurs, but you hear some problems and applications lag with it, you can try the following:

If suddenly you have done everything stated above, the sound does not appear in the speakers, but there is sound in the headphones, try using special program to search for drivers. I previously talked about it in the article Driver booster for Windows 10

Of course, options such as “the sound disappeared after the cable was disconnected” or “as a result of the device falling” were considered. Mechanical damage is more difficult to “cure” on your own, and therefore it is better to contact a specialist.

The sound on your computer may disappear not only after the next update to Windows 10, but also for any other reason. Sometimes it is not possible to install them, but it is necessary to restore functionality. First you should check the settings, sometimes the sound does not work after it is turned off. It is also important to pay attention to the signal output to the audio equipment. These activities help to avoid trivial reasons why the sound does not work.

Checking settings

A good place to start would be to contact Windows settings 10. Sometimes you just need to turn up the volume. Right-click on the speaker in the lower right corner. A context menu will appear in which you need to select the highlighted item.

A special Windows 10 module will launch, which will try to automatically detect the problem. If the problem was not found and the sound still does not work, then you can move on to the next step.

• You need to open Playback Devices and click on Speakers twice.

• After this, you should open the Levels tab and check each slider. After all, if they are turned to 0, then the sound cannot come from anywhere.

You can run the Realtek High Definition Audio service for updates to check. To do this you will need:

• Open the Start menu.
• Select the Settings tab.
• Then you need to go to Update and Security.
• Search for updates.

If something is found, the updates will be immediately installed on the computer.

Connections

Do not forget that the reason why the sound does not work in the operating room Windows system 10 may be completely trivial: the wire is not connected to the correct socket. The problem can be solved simply by connecting an audio cable alternately to each connector. As soon as the signal is heard, the input will be identified correctly. There may also be a problem with the audio amplifier. Often, users output sound to equipment that itself amplifies it. You need to make sure that the volume level is at a sufficient level for the signal to be heard.

It is worth paying attention to the choice of the input signal into the amplifier itself, and checking the settings.

After this, the fool effect will be eliminated, when the problem is of the nature of ordinary confusion or carelessness.

Installing drivers

It happens that checking updates and connections does not help, and the sound does not work again. In this case, you need to check whether the drivers for the sound card are installed. It is not necessary to download such utilities yourself, as you can do this using automatic programs. For Windows 10 in this case it is provided basic search. In order to contact Windows 10 with this question, you need to:

• Open the search, which is located next to the Start button.
• After that, enter Device Manager in the search.
• Next you should select Sound, game and video devices.
• We open the lists; if there is nothing in the lists, then we need to update the configuration. If the lists contain items, you must select Update drivers.

After all the actions taken, the sound should return to normal. It's a good idea to restart your computer for the changes to take effect. Since Windows 10 is the newest operating system from Microsoft, after the next update, very strange things can happen in it. There is only one reason - fine-tuning the system to normal operation. Only users can give good feedback about a new axle, so putting it into service unfinished is a great marketing move. Of course, you will have to suffer a little because of this. But this torment accompanied all Windows series.

(Visited 2,504 times, 1 visits today)