Turn on the fifth iPhone. How to activate a new iPhone using iTunes

Buying a device from Apple is a joyful event. But after turning on the device for the first time, the user may encounter a number of problems. For example, with gadget activation. Not everyone knows about this operation. We have to figure out how to activate the iPhone 5S. What is needed to bring an idea to life? If you carefully follow the simplest instructions, and also read the text on the phone display, you will be able to do this in the shortest possible time. Where to start?

What's useful

Let's start with preparation. Activating an iPhone 5S is impossible without some details. Typically, users have no problems preparing for activation. In particular, among Apple fans.

In general, this will require:

• SIM card;
• connection to a network via Wi-Fi (or a computer with the Internet and iTunes);
• power supply;
• phone charger;
• SIM card clip;
• USB cable.

This will be enough to activate the Apple device in any way. Getting an iPhone 5S to work isn't that difficult. Next we will look at the activation procedure in detail.

Activation steps

How to activate iPhone 5S? More on this later.

First, you should pay attention to the fact that this process consists of several stages. Namely:

• inclusion;
• selecting basic phone settings;
• direct activation;
• launching the device for the first time.

We will definitely be able to learn about all these stages further. Everyone can get started with the iPhone 5S without much difficulty.

Sim card

The first thing to do is insert a SIM card into the phone. Apple devices excel in this regard. They provide a special process for connecting a SIM card.

How exactly to proceed? The owner of an Apple phone must:

1. Take a paper clip for the SIM card.
2. Insert the mentioned component into a special hole on the side panel of the smartphone.
3. Click on the paper clip.
4. Remove the SIM card slot.
5. Insert the SIM card into the slot.
6. Return the component back to the phone.

Turning on the device

The next step is to turn on the smartphone. To do this, the user must first connect the device to the charger and plug it into an outlet. With zero (or minimal) battery charge remaining, activation will not be possible. It will simply stop. To successfully cope with the task, you need to have a charge of at least 20-30%.

How to activate iPhone 5S? On the top panel of the Apple phone, you need to press the power button. After holding it pressed for several seconds, the device will start.

If everything is done correctly, a silver apple will light up on the display. This is a sure sign that it's time to take the next step.

Basis

Did the person buy a phone from Apple? The iPhone 5S, like any other Apple device, will have to be activated. Otherwise, it will not be possible to work with him. Fortunately, everything is not as difficult as it seems at first glance.

The activation instructions for iPhone 5S are divided into several simple steps. After turning on the device, you will have to set the basic phone settings. It is proposed to do this as follows:

1. Swipe from left to right along the bottom of the display. You need to do this when the welcome screen lights up. It will say "Hello" in different languages.
2. Select the desired system language. Just tap on the corresponding line.
3. Indicate the citizen's country of residence.
4. Connect to the Internet. For example, by clicking on the “Select network” hyperlink and then specifying a particular Wi-Fi.

By the way, you need to be extremely careful when connecting to the network. After all, the further activation of the iPhone 5S will depend a little on this. First, let's look at the situation with connecting to Wi-Fi. This is the most common layout.

Basic steps

How to activate iPhone 5S with a SIM card? As soon as the user connects to the Internet, a form will be available for him to fill out. It will help you configure your phone for the first time.

Guide to iPhone activation looks like this:

1. Enable or disable geolocation. To do this, click on the appropriate line.
2. Select the "Like New" option.
3. Create an AppleID profile.
4. Click on the "I agree" button. It is located at the bottom right of the display.
5. Click on the words “Install now” and place your finger on the selected area on the screen. This step can be postponed. Just click on the appropriate button.
6. Set a password for working with an Apple device.
7. Click on the "Allow sending data to the Apple server" or "Do not allow" button. It all depends on personal preference.

Ready! If everything is done correctly, the message “Welcome!” will appear on the screen. It will inform you that the device has been successfully activated. But what if there is no Wi-Fi network? Then you will have to carry out the procedure through a computer.

iTunes, PC and iPhone

In reality, everything is much simpler than it might seem initially. We already know how to activate an iPhone 5S. If the user cannot find a Wi-Fi network, he will have to carry out the procedure using a computer or laptop.

Under these circumstances, it all starts with installing a program called iTunes. All owners of Apple gadgets should have it. Will have to download latest version programs. Otherwise, the application may malfunction.

The iTunes installation file is downloaded from any available source, after which the exe document is launched on the computer. The installation wizard is activated. By following the instructions on the screen, a person will be able to complete the initialization of the software. It's absolutely free.

Connecting to a computer

How to activate iPhone 5S without a SIM card? You can operate through a computer and iTunes. This technique also helps to cope with the task if there is no Wi-Fi connection.

You need to properly connect your Apple device to your computer. How is this done?

The following type of instructions will help you cope with this task:

1. Take a USB cable.
2. Insert one end of the cable into the appropriate connector on the phone.
3. Plug the other end of the cord into the USB port on the computer.
4. Launch iTunes.
5. Wait a little.

This way, not only will the connection occur, but also the devices will be synchronized. It's very convenient. Especially considering that now the user will be able to activate the iPhone 5S without much difficulty.

What exactly should I do? Follow the instructions on the screen. They are no different from the steps listed earlier. The only difference is that when connecting via a PC, you do not have to insert a SIM into the device, and there is no need to turn on Wi-Fi.

Without iTunes

How to activate an iPhone 5S if a person does not have a SIM card? There may be problems with this operation. Especially if the user does not want to work with iTunes.

Without a SIM card it is almost impossible to cope with the task. Although experts recommend working with iTunes to bring your idea to life. Or you should follow the instructions below.

It has approximately the following structure:

1. Turn on the phone.
2. Press the "Home" button on your mobile device.
3. Select "Emergency call".
4. Dial "112".
5. Press the call button.
6. Click on the "Turn off" button.
7. Select the "Cancel" option.
8. End the call.

It's done! Now the user will have a fully working device. But, as a rule, sometimes iPhone activation fails. What difficulties might you encounter under certain circumstances?

Problems

Apple smartphones are the most common technology. It's high quality, but even it sometimes fails. What difficulties might users encounter when thinking about how to activate an iPhone 5S?

The following situations and ways to solve them can be distinguished:

1. If you do not remove the film from your mobile device, the Home button will be difficult to press. Because of this, the device may be blocked. The solution is simple - you can press the “Enable” button on the gadget during auto-locking.
2. Absent Wi-Fi connection. IN in this case Only connecting an Apple mobile phone to a computer with iTunes will help you cope with this task.
3. Problems with device synchronization. They usually disappear if you update iTunes on your computer.
4. iTunes update failed. Removing it is as easy as shelling pears. It is enough to first close the application completely. Only then is it allowed to update it.
5. Inability to take fingerprints. To achieve this task, you need to remove the factory default from the screen. protective film. The mentioned operation will not work with her. The sensor simply will not be able to recognize fingerprints.

These are the most common problems. Now it’s clear how to deal with them. Activating your iPhone will no longer cause any trouble or hassle.

Results

We figured out how to get an Apple phone to work for the first time. The instructions below will help you activate any iPhone. The main thing is to properly prepare for the procedure.

At first, you can refuse to create an AppleID. Without this profile, the phone owner simply will not have the right to use Apple services. For example, iCloud or AppStore. Therefore, it is advisable to immediately start Apple ID.

Often after purchase iOS devices the user does not know what to do with it next, which is why the beginner has the question: “How to set up the iPhone and start using it”?

According to advanced apple growers, the initial setup is an extremely important stage, on which the quality and ease of use of the device in the future depends.

The article will discuss in detail how to properly configure a new, newly purchased iPhone.

You will have the opportunity to enjoy all the benefits of Apple technology and not have to pay store managers for the initial settings of your device.

General settings

So, you took your iPhone out of the box and pressed the power button.

If you are setting up a new Apple device, then this setting is optional and you can skip this step by clicking “Next”.

If you decide not to skip this step and are within range Wi-Fi networks, then select the one you need and enter the password, then click “Next”.

The next window will ask you to choose whether to enable or disable location services.

Important! Responsible for the operation of geolocation servicesGPS module. When activated, the iPhone will track your location, use maps, receive the latest weather forecast, be able to change the time zone as you move, and much more. But, moduleGPS consumes quite a lot of battery iOS device.

In principle, when setting up a new iPhone, you can disable geolocation services, which can always be activated as needed.

Click “Disable” and confirm your decision by clicking the “Yes” button.

After you have decided on the geolocation, you will see the settings screen for your Apple gadget.

Since we are considering a new, “boxed” iPhone, we need to “tap” on the line “Set up as a new iPhone.”

Creating an Apple ID Account

You have now moved on to the most important process - setting up Apple ID.

Using this account In the future, you will log into Apple services, buy applications, music, synchronize several devices, make free video calls between them, chat, etc.

This step is not considered mandatory and can be skipped when setting up a new iOS device, but experienced Apple growers recommend creating this identifier right away.

Select “Create Apple ID for free”

Important! Please note that if the owner of the “Apple gadget” is under 18 years of age at the time of creating the account, the system will refuse registrationAppleID.

After entering the data, the system will ask which mailbox to use. You can enter an existing one email address, or get it for free on iCloud.

In this article, we will look at registering with Apple ID with an existing address.

Use current mailbox

• enter your available email address;

Email address

• create a password and confirm it;

In order to use mobile internet necessary:

• Insert the SIM card into the iPhone and then go to the Settings application.
• After that, go to the section “ Cellular connection" and in the "Cellular data" column turn on the Internet.

Data for operating an iOS device on the Internet arrives immediately after installing the SIM card in the iPhone. You just need to save the SMS with the settings in your phone.

In order to use your iPhone as a Wi-Fi modem, you must:

• We enter the “Settings” of the iPhone.
• Go to the “Modem Mode” section and move the slider to the ON position.

After this simple procedure, your iPhone can distribute Wi-Fi, working like a modem. A blue bar with the number of connections will indicate that wireless connection works.

If your Mac computer is not equipped with a Wi-Fi module, then the iPhone can still be used as a modem and broadcast Internet traffic via a USB cable.

To do this you need:

• Go to Mac system settings. In the section "Internet and wireless network» Click on the “Network” icon.

• In the left column at the bottom of the window, click “+” and select “USB to iPhone” in the drop-down menu. After this procedure, click “Create” and the “Show all” button.

• In the drop-down window, click the “Apply” button.

We connect the iPhone to the computer with a USB cable and turn on the modem on the phone. As described above.

The main thing is to remember to connect the phone itself to the Internet, via Wi-Fi or 3G.

There is another way to broadcast the Internet from an iPhone and use it as a full-fledged modem: via Bluetooth.

To do this you need:

• Enable Bluetooth on both iPhone and Mac and create a connection between the devices.
• Then turn the iPhone into modem mode, as described above.
• Click on the Bluetooth icon on your Mac, select iPhone from the drop-down list, and “Connect to network.”

A blue bar with the number of connections will indicate that your gadget works as a modem.

Advice: If you use 3 to connect to the InternetG or 4G network, then choose unlimited tariffs, since mobile Internet is not cheap.

First launch and setup of iPhone and iPad

How to set up an iPhone: Instructions for dummies

So, you have become the happy owner of a brand new product from a famous Apple company. How to turn on iPhone and how to start using it? iPhones of all generations are turned on as standard - using the Power button located at the top right of the phone. The same button is responsible for locking and unlocking the phone.

But even after turning it on, it is most often impossible to use the iPhone. In order for the device to begin fully functioning, it must be activated. If you bought a phone from one of the major mobile operators such as MTS or Megafon, then it will most likely already be activated. But if not, then you can do this operation without problems.

Let's take a step-by-step look at how to turn on your iPhone and activate your new phone.

1. Take your iPhone and PC cable out of the box.

2. Download and install on your computer special program iTunes.

3. Insert the SIM card into the phone, turn it on using the Power button, connect the phone to the computer via the cable that was included.

4. Most often, iTunes starts automatically. If not, run the program manually. She herself will offer to activate the device. We confirm the request.

5. Leave the iPhone alone and wait for activation to occur. While there is no activation, the device displays a waiting message. While the process is going on, you can get acquainted with the capabilities of the device that do not require communication, for example, with the camera, importing photos, menus, etc.

6. When activation is complete, try calling. If everything is in order, the phone will dial the number. This means that the full functionality of your iPhone is enabled.

How to turn on iPhone 4s

For this generation of iPhones, the activation process was significantly simplified - using a computer was no longer necessary.

How to turn on iPhone without using iTunes.

1. Insert the SIM card, turn on the phone using the “Power” button.

2. Choose a familiar interface language: Russian-Russia

3. The phone asks whether you will allow it to determine your location or not (this will be needed later to use maps, check-ins on Facebook, etc.). If these functions are needed, then we allow them.

4. Next the iPhone will ask WiFi connection. In principle, this step is optional. It can be done later, at any time. We will still need the Internet to send information to Apple about the successful activation of the device, as well as for the operation of various online services such as iCloud and iTunes Match. For the same purposes, you can successfully use the mobile Internet. local operator(3G/GPRS).

5. Now the iPhone will register on the network mobile operator, will receive necessary settings for MMS, SMS. If you previously had a different iPhone, they will offer to restore the previously saved data from backup copy. And if the iPhone is new, then you need to select “Set up a new device.” In general, after this you can already use the phone fully. Further steps are in principle optional, but highly desirable.

6. Again you need to connect to the Internet and log in with your Apple ID (this is a personal account for everyone Apple services). If you don't have one, you need to create a new account - it's free and easy.

7. An agreement appears that you need to accept (it would be good to read it first), then enable (or not enable) voice assistant.

8. Whether we agree or not that Apple conducts diagnostic reports, click the “Start using” button. That's all, actually.

Don’t forget also that you can activate your iPhone 4s using iTunes.

How to turn on iPhone if the "On" button does not work

If you hold the power button long enough, but the phone does not respond, then the problem is most likely in top train, where the button is located. Then there will be problems with the headphone jack, the volume control buttons, and the silent mode switch.

Perhaps the power button has sunk, reaching the same height as the body. You need to check: maybe the fasteners are cracked or the screws are loose.

In any case, if the button does not work, then the phone must be taken to the service. It is better not to open it yourself.

How to turn on iPhone if it's frozen

To do this, you need to use the forced reboot mode: simultaneously press and long hold the “On” button (at the top) and the “Home” button (the only round button under the screen). After this, the phone will turn off. If you turn it back on, it will take longer to reboot than usual, but the problems will automatically be fixed.

How to turn on iPhone 3G

On home page screen you need to click “Settings” - “General” - “Network”. In the next window, swipe the slider. Click the “On” position next to 3G.

When the 3G protocol is used, the information loads faster, but the battery power is also consumed faster.

Live Photos Live Photos are kind of like magical photos from Harry Potter. Whenever you take a photo with this mode enabled, you will get a few seconds of video before and after the photo was taken. It's pretty amazing, but it can also use up a lot of extra storage space (and the iPhone SE only starts at 16GB). You can disable this feature by tapping the icon (three circles) in the top center of the camera app; yellow means it is on and white means it is off.

The article tells in detail how to turn on iPhone 5 using conventional and unusual methods, what kind of breakdowns occur and how to solve them.

iPhone 5 was released in 2013 and gained immense popularity, like most Apple devices. It has always been famous for its ease of use, speed of operation and beautiful design. However, any device always has problems from time to time software or with technical side. Even the iPhone 5. Despite the fact that the phone is of high quality, sometimes breakdowns will still occur. For example, the iPhone may not turn on. And some new users who hold the device in their hands for the first time also do not know how to turn on the iPhone 5.

Let's look at several causes of iPhone 5 problems and how to fix them.

How can you turn on iPhone 5?

The easiest way to turn on an Apple phone is to press the POWER button and hold it until the iPhone 5 turns on. It usually takes a few seconds.

It happens that in this way the phone still does not turn on. Then the creators of the iPhone came up with a function to turn on the phone by pressing the POWER and HOME buttons for seven seconds.

If the phone still does not turn on, then there are several options to solve the problem. Let's look at them in more detail below.

IPhone. Home and Power button not working

Read also

How to transfer information from an old iPhone to a new one Apple has long taught all its customers that every year after the presentation new iPhone you should start saving money for its purchase. In...




As some of you every dream already know, Google is planning to release the next Android version, which we now know simply as Android Q, sometime in August/September. In addition, the Mountain View company will release a couple more beta versions of Androi...



Following the launch of Motorola Android TV in India, Google has announced four new features that will be available to those using smart TVs with operating system. Since in India not everyone has Wi-Fi at home, this makes it difficult...




Laptops have become an integral part modern world have now 100 percent replaced bulky desktop computers. The popularity of these gadgets is not surprising; they retain all the potential of the average computer, with all this...

How to connect a Samsung TV to a computer via wifi How to connect a Samsung tablet? Tablet computer. a small-sized version of a PC whose device is equipped touch screen. In order to use all the functionality of the equipment, you need...




Meizu M3 mini (m688u) firmware, recovery Summary of firmware Meizu phone M3 mini (m688u) on latest firmware(Flyme OS version), using the standard recovery menu, complete Russification of the Meizu M5 mini phone, as well as how to restore &laq...

iPhone. not working button Home and Power Our digital magazine:

How to turn iPhone OFF and ON WITHOUT POWER BUTTON?

In this #video I talked about how you can # turn off And # turn on iPhone, #iPad and #iPod without button nutrition. And so, I’ll turn it off.

iPhone 5 is dead

The most popular reason for the phone not turning on is when charging is finished. In this case, you just need to put the phone on charge and let it charge for at least ten minutes before turning it on. Although usually the phone turns on on its own while charging.

iPhone 5 is charged but won't turn on

If after charging the phone still does not turn on, then in this case you can try the second method of turning on the phone by pressing two buttons, which is described in the first section. If this method did not help, then the phone has some kind of malfunction in the technical or software part, which will be discussed later.

Read also

How to connect a fitness bracelet to your phone: some nuances Against the backdrop of many new products mobile devices fitness bracelets are ranked last as they are popular among users Android devices. Therefore, most manufacturers...




Well, at least Kevin NEW YORK: THE SURFACE PHONE is finally here, only it's a dual-screen device dubbed the Surface Duo, which is Android and won't be released until late 2020. In some ways, it's a smaller take on the S. .

Power button is broken

It happens that the Power buttons on iPhone 5 break or break off. In this case, turning on the phone will become a real problem. You can try putting the phone on charge and it should turn on by itself. However, this method does not always work, and it is not possible to carry a charger with you all the time.

iPhone 5 got wet or overheated

The phone may break after getting wet. It's worth waiting a few days or even weeks, leaving it in a warm, dry place to dry out the insides. After this, you can try to turn on the iPhone or take it to the service.

If you leave your phone in the sun or in a place where the temperature is high for a very long time, the iPhone may overheat or even melt. After this, it will not turn on immediately until the flash memory and processor are too hot to work. Before trying to turn it on, it is better to wait until the phone cools down until normal temperature and then try to turn it on.

iPhone 5 won't turn on by any means

If the iPhone is so damaged that it cannot be turned on by any normal means, then in this case it must be taken to a service center to correct problems in the software or technical sector.