iPhone data recovery. How to recover data on iPhone, iPad and Android devices How to restore an iPhone without a backup

Recover Data from Dead iPhone

My iPhone went completely dead yesterday. He won't take charge, nothing, he just died. I took it to the Apple store and they pronounced it dead. I recently supported it when I installed iOS 9.3.2. My question is, is it possible to recover photos and videos that resided on it? I don't sync it with iTunes offers recently.Any?

How to Recover Data from Dead iPhone

My iPhone is dead. If you search for it on the Internet, you will find many people looking for a solution to recover data from their dead iPhone. After all, the device was dead, saving the data is current. Well, to recover data from a dead iPhone, you need the help of a third party program that can help directly scan your iPhone and take the data on it. If you don't have a choice yet, here is my recommendation: dr.fone - Mac iPhone Data Recovery or dr.fone - iPhone Data Recovery. This dead iPhone data recovery software can help recover data including contacts, SMS, photos, videos, notes and more, including data recovery from broken iPhone and data recovery from iPhone in recovery mode, etc.

Part 1: Recover dead picture data by scanning it

To begin, connect the dead iPhone to your computer and check if it can actually be detected by your computer. If yes, please follow the instructions below to recover data from dead iPhone. If not, please follow the solution in part 2 and part 3.

Step 1. Connect a dead iPhone to your computer

Launch the dr.fone program after downloading and install it on your computer, then connect the dead iPhone to the computer using a digital cable. It doesn't matter, even it doesn't work. Just do it. After connecting iPhone, you will get the interface as follows.

Step 2. Check your dead iPhone data on it

After this, you will be told you have successfully entered device scanning mode and the software starts scanning your iPhone now.

Step 3. View and recover data from dead iPhone

The scan will stop after a few minutes. Found data will be displayed in categories such as Camera Roll, Photo Stream, Contacts, Messages, etc. You can view each of them one by one, and mark the ones you want to save them on your computer by clicking the " Restore to computer » ,

Note: Data located in each category includes those deleted in lately. You can check them by sliding the button on the top: only show deleted items.

dr.fone - the original phone tool - working to help you since 2002

Part 2: Recover Dead Picture Data by Extracting iTunes Backup Files

In order to use this method to extract data from a dead iPhone, you must have a backup of the iTunes file at first. That is, have you ever synced your dead iPhone with iTunes before. After that you can do it.

Step 1. Launch the program and check iTunes backup files

After launching the program, click the “Recover from iTunes” button backup file» from the side menu. After this, you will see a list of all your iTunes backup files. You can select any of them and then click the "Start Scan" button to begin.

Step 2. Preview and recover data for your dead iPhone from iTunes backup

The scanning will only take you a few seconds. Once it is completed, you can view all extracted contents from backup copy ITunes. Select a category on the left side and check each item on the right. Mark the item you want to recover and click the "Recover" button to save them all to your computer.

Part 3: Recover Dead Picture Data by Downloading iCloud Backup Files

To recover dead data from a picture backup iCloud files, you must have an iCloud backup. If you have enabled the iCloud backup feature on your iPhone or have made an iCloud backup before, this way works for you.

Step 1. Login to your iCloud account

Select "Recover from iCloud Backup File" from the side menu of dr.fone. Then you can see the window as follows. Enter your iCloud account and login.

Step 2. Download and unzip iCloud backup contents

Once you receive you can see everything iCloud files backup in the list. Select one for your dead iPhone, and click the "Download" button to get it. When you do this, make sure your Internet connection is perfect. Then click the "Start Scan" button to retrieve the downloaded file later. It will take you a few minutes. Just do it according to the reminder message.

Step 3. Preview and recover data for your dead iPhone

When everything is done, you can look through the data one by one and decide which element you want. Check it and click the "Restore" button to get it.

If you need to reset your iPhone, iPad or restore your iPhone to factory settings, there are several reasons, the gadget is sold to buy new iPhones, you buy an iPhone, iPad from your hands, the iPhone does not work correctly so you want to reinstall the firmware, you just want to reset some device parameters. Whatever the reason, in the end, you have done a factory reset. But after that, if you haven't created a backup copy, how to recover lost and deleted data? Today we recommend the program.

Tenorshare UltData program allows users iOS devices recover text messages, contacts, notes, photos and other files. There are three options for retrieving data: restoring directly from iPhone, iPad and iPod, restoring from iTunes backup, and restoring from iCloud backup. This is a lifesaver for those who have lost data as a result of jailbreaking, iOS updates, factory reset, erroneous deletion, etc. Supports all iOS devices, including red iPhone X/8/iPhone 7 Plus, iPhone 7, iPhone 6, iPhone 6 Plus, iPhone 5S/5C/5, iPhone 4S, iPhone 4, iPhone 3GS, iPad Air 2, iPad Air, iPad mini 3/2, iPad mini, iPad 4 ( iPad Retina Display), iPad 3 (New iPad), iPod touch 5G/4G/3G, iPod nano, iPod classic, iPod shuffle.

Recover directly from iPhone, iPad and iPod

Step 1. Connect the device to your computer using USB cables, launch UltData on your computer. Select "recover data from device".

Step 2. Scan iPhone lost data and view contacts, SMS, notes, photos, etc.

Step 3. Recover data from iPhone and click "Recover" button, you can choose file formats and save to your device or computer.

Recover Lost Data from iTunes Backup

This method will allow you to select the data you want to recover. Also more important, this recovery mode will not overwrite the current data in the device.

Step 1: Go to "Recover from iTunes Backup" and UltData will automatically list all iTunes backups on this computer. and click the "Start" button.

Step 2. View lost data, you can select "Show deleted data only" to filter the deleted data.

Step 3. You can click "Settings" to select file formats and click the "Recover" button.

Recover Deleted Data from iCloud Backup

Step 1. Select recovery mode and sign in to iCloud.

Step 2: You can check the details (name, date, version and size) of each backup file. Select the file types you want to download and scan

Step 3: Click "Settings" to select file formats and click the "Recover" button.

Recovering lost data doesn't have to be difficult. Just choose one of the above methods to get back your lost data and have your device working normally again. To avoid data loss, please make a backup copy in iTunes or iCloud. If you have other questions, please contact us, we will respond within 24 hours.

If you plan to transfer or restore data to your iPhone, you can do this using the backup function. To do this, connect the device to your computer or configure cloud storage. Since you can only restore a backup on an iPhone from iCloud if you have an Internet connection, connect to the network.

How to restore an iPhone without a backup

If there is no backup, but the device needs to be restored (for example, due to system error, breakdowns), then this can be done in several ways:

1. Produce full reset to factory settings. To do this, go to the iPhone settings and select the appropriate item. The method is suitable if the device starts, but you need to update the firmware without a computer.
2. Activate DFU mode. After that, connect your iPhone to your computer with via USB cable and download the new firmware version. All user data will be deleted and the iPhone will be restored to its original state.

If the device does not work, but it contains important information and other files, then before using recovery mode, create a backup copy of your data through iTunes. After that, you can transfer them to an already working smartphone.

You can try to restore a deleted backup on your computer using special software. The method is relevant if the backup was erased quite recently.

How to restore iPhone via iCloud

If your device has enabled cloud backup, follow these steps to restore your data:

1. Turn on the iPhone you want to restore and go to the Settings menu. Additionally enable mobile transmission data or connect to a Wi-Fi network.
2. In the General section, find and select Software Update. Availability check will begin new version software. If necessary, download it.
3. Check the official icloud website to make sure you have a backup copy. After that, turn on your iPhone and go to the Settings menu.
4. Find the line with the name account and go to the "iCloud" tab. Here select “Storage” - “Storage Management”. A list and options of the latest backups will be displayed.
5. Before you begin data recovery, perform a factory reset. This can be done through the “Basic Settings” menu. Click on the "Erase content and settings" button to completely delete user data.
6. Wait for the operation to complete and perform the initial setup. In the “Applications and Data” block, click on the “Restore” button.
7. From the list of suggested methods, select “iCloud Backup”. To do this, you will need to sign in to your account.
8. From the list of available ones, select the backup you want to write to the new device.

How to enter iPhone into recovery mode

Disaster recovery mode (DFU) is necessary for emergency data backup and operating system updates in cases where this cannot be done using conventional methods. Allows you to restore system files, update the firmware. How to activate DFU:

1. Disconnect your iPhone and use a USB cable to connect it to your Windows PC or Mac.
2. Press and hold the Home and Power keys at the same time.
3. After about ten seconds, press the "Power" key. But don't release the Home key. It must be pressed.
4. Wait until a system message appears on the computer screen.

After an emergency startup, the smartphone will restore all system files. The method is suitable for all iPhone models. Other relevant information and instructions for putting the device into emergency mode can be found in the documentation.

How to restore an iPhone using iTunes

If you have previously used iTunes to make data backup, then you can transfer the resulting copy to your smartphone. Procedure:

1. Using the original USB cable (supplied with the phone), connect your iPhone to your PC or Mac. Launch the iTunes program. If necessary, download the distribution kit from the official Apple website.
2. Put your mobile device into DFU emergency mode (read the instructions above for how to do this). After this, a notification about the found phone will appear on the computer screen.
3. IN iTunes program go to the review tab. Information about the connected device appears, serial number. Hold "Shift" on your keyboard and click on the "Restore iPhone" button.
4. A warning will appear on the screen. Confirm the action and agree to the operation again.

After this, all user data stored in the backup will be transferred to the smartphone. Sometimes errors may appear during the process. Therefore, below we will consider the most popular problems that may arise.

Failed to restore iPhone error 3194

Error 3194 when restoring an iPhone can appear for various reasons, most often due to broken network parameters. Then the computer cannot connect to the Apple server and download latest version firmware. How to fix:

1. On a computer with an operating system Windows system go to system folder"System32" and find the "Drivers" directory here.
2. By using system utility Notepad, edit the hosts file. To do this, click on it right click mouse and context menu select "Open with".
3. In the file, find and delete the line that contains “gs.apple.com”. There will be an IP address nearby, you need to erase it too.

Save your changes and restart your computer. After this, try the data recovery procedure again.

Failed to restore iPhone error 9

Most often it appears due to a disconnection between the computer and the device. For example, if you are using a faulty USB cable. What to do:

• Activate DFU mode on your iPhone and only then begin recovery.
• Try using a different cord (only the original one).
• Connect the cable to another USB port.
• Reinstall iTunes.

If the described methods do not help resolve the error, then most likely the problem is in a faulty device. In this case, contact an authorized service center. In some cases, the connector may need to be cleaned or completely replaced.

Recover accidentally erased user data (notes, contacts, installed applications) you can restore a copy of the device via iCloud.

Error 4013 when restoring iPhone 6

Appears if in progress iTunes recovery could not install the firmware, the procedure was interrupted or canceled by the user. To resolve the issue, follow these steps:

• Replace the USB cable, try using a different USB port on your computer.
• Reinstall iTunes, check for updates for PC Windows or Mac. If available, be sure to download them.
• Make sure that there is no dust in the device connector, and that the cable does not come off after connection.
• Try activating recovery mode on your iPhone or connecting your smartphone to another computer.

If the error still recurs, try using another method to restore data and be sure to contact the service center. Most likely, the cause of the error is a breakdown of internal components.

Many iPhone users often encounter a situation where the memory card mobile device fails and the necessary information is practically lost if it is not restored in time.

It is difficult to foresee such a situation in order to back up your data, but you need to know possible ways overcome such difficulties independently at home. However, recovering lost data is a very time-consuming and complex process. This is why it is highly recommended to back up your data to hard drive computer or other storage medium.

Standard recovery methods

Mobile devices from Apple, including the iPhone, are very specific, and therefore traditional methods of data recovery are not always effective. But it is possible to restore information using tools recommended by the developer.

First of all, we are talking about the iTunes program, which can be installed by saving it from the company’s website. The program is very easy to use. But you can recover information from iPhone only in this case. If a backup was previously made in the same program.

To restore data, you need to select the “Synchronize” menu item for the selected group of files.

The program supports manual recovery iPhone data with the help backup image. It is important to note that files larger than 2 GB cannot be restored via iTunes, so it is advisable to back them up separately

Backup data images are saved in the iTunes directory, the path to which differs in different operating systems. This software allows you to store only one single copy of data, so its relevance must be approached with particular care.

Video: Restoring iPhone 5

iPhone Spy Stick

In a situation where there is no backup copy of data, and its value is undeniable, the easiest way out of a difficult situation is to contact qualified specialists. However, you will have to pay a tidy sum for this.

An alternative way is using iPhone Spy Stick. Essentially it is a flash drive with built-in software. This software allows you to recover lost information from call logs and contacts to videos and photos.

The data recovery process is as follows:

• you need to connect your iPhone to your workstation and USB device iPhone Spy;
• launch specialized software from a USB device;
• mark the necessary data for recovery.

Photo: flash drive with software

A huge disadvantage this method Information recovery is high cost of iPhone Spy Stick, which can reach several hundred dollars.

Alternative way

Another method to restore iPhone without a developer backup is as follows:

Third-party iPhone data recovery software

Standard tools from Apple often help out, but sometimes they are powerless. In such a situation, you can use one of the programs for recovering information from a smartphone, which are mostly free and Russified.

Among the most popular of them are:

Undelete Plus

The main purpose of the program is to recover information from iPhone when there is no backup copy. It can help out even in situations where the card cannot be read by either a smartphone or a computer.

The sequence of actions to restore information is as follows:

• you need to run a program previously installed on the workstation;
• insert a memory card;
• start scanning it. The scanning process is very long and can reach several hours. For more simple search necessary information among remote files, you can apply all kinds of filters;
• To restore all information found by the utility, you should check the boxes and click “Restore”. After selecting a data extraction location, the marked files will be saved to the specified location.

In general, we can say that recovering data from iPhone using this software is a fairly easy process that is not only effective, but also relatively fast.

Wondershare Dr.Fone is an easy-to-use professional application that will help you recover files, photos, videos, contacts, and other data from devices such as iPhone, iPad and iPod Touch. The program is able to recover everything from contacts, SMS messages to photos and videos on your device. The first iPhone, iPad & iPod touch data recovery program for personal users.

Among the useful features of the program, it is worth noting the ability to preview deleted or lost data and the ability to conveniently view deleted contacts.

MobiSaver

MobiSaver is a free Windows application that helps you recover data from iPhone.

The sequence of actions when recovering information is quite traditional. A characteristic feature of this utility is that it will help you recover data only to your computer.

Any electronic device does not last forever, and all people make mistakes and can accidentally delete the necessary information. In such a situation, you can restore data either using standard Apple tools or one of many third-party utilities.

Now almost every home has some kind of data storage device: hard drives and solid-state drives (SSD) in computers and laptops, USB flash drives, microSD cards, and so on. True, all these devices have a common serious drawback. Due to the complexity of the technology used in their production, there is always a chance that the drive will fail, “burying” all the available information: photographs, collections of home movies or music. Hard drives and SSDs have a limited data rewriting resource, which the average user cannot always track. But even if the drive fails, this does not mean that the data is lost forever. In most cases, them.

Experts tell us how service center ModMac.

HDD is a disk coated with a magnetic coating that rotates at high speed (from 5,000 to 15,000 rpm). A magnetic head moves along it on an air cushion, which reads the magnetic field of the disk tracks or writes it. The positioning of this head is very precise and the surface of the disc must be perfect. A disc with a diameter of less than 10 cm can hold more than a million tracks. The heads are controlled by a special microprocessor located on the disk board.

There are several types of damage and data recovery methods. The most common problem with hard drives is damage to service information (head calibration, physical size of the drive, area with a surface defect, and so on). IN in this case Software restoration of damaged zones and saving a disk image will help, which costs from 5,000 rubles. 


Another problem that occurs most often is damage to the magnetic disk due to resource exhaustion. In this case, the HDD self-diagnosis program (S.M.A.R.T.) simply blocks access to it. In this case, the lock is removed and all intact information is read. It will cost 3,000 rubles or a little more.


The third most common problem is mechanical damage to the disk or head. For example, due to a shock or fall while reading or writing. At that moment, when the head, moving at high speed above the surface of the disk, jerks and hits the surface of the disk, it is damaged and destroyed. In this case, the disk is first washed, the head is replaced with a new one or removed from the “donor”, ​​service information is corrected, and then the disk image is read. The cost of such work is from 8,000 rubles.

The SSD drive is damaged


SSD (solid-state) drives are a board with microcircuits soldered on it. From 1 to 16 NAND memory chips are connected to the SSD controller. An SSD works much faster because it has no moving parts, and recording occurs simultaneously on several memory chips.

 The most common problem with SSD drive failure is software failure. In this case, the controller firmware is flashed and the SSD image is read (cost from 2,500 rubles).

The second problem is the development of the rewriting resource of NAND memory chips. The already mentioned self-diagnosis system (S.M.A.R.T.) can block access to data. In this case, the lock is released and the undamaged data is read. Such work will cost twice as much.

Another common problem is the final failure of one of the NAND chips or the SSD controller itself. In this case, the NAND chips are unsoldered and the images are read separately on the programmer. Then a virtual collection of the SSD and decryption of the data is done, after which everything is “merged” into the SSD image. The price of such work is approximately the same as when developing a rewriting resource.

The USB flash drive is damaged


A USB flash drive, like an SSD, is a board with soldered flash drive controller chips and NAND memory (from 1 to 4). When a USB flash drive fails, the NAND chip is most often removed and read on the programmer. Also, flash drives are quite often subject to mechanical damage. For example, if used carelessly, the USB connector comes off. In this case, USB is soldered directly to the controller, and then the data is read. You can restore a flash drive for 2,500 - 5,000 rubles.

Data on iPhone or iPad is damaged

The iPhone and iPad, like SSDs, have NAND memory. It is extremely difficult for her, since she is extremely scrupulous in matters of security and installs an advanced encryption system in her tablets and smartphones. Therefore, if your iPhone or iPad is broken, you can recover data if there is no damage to the NAND or CPU. In this case, you can access motherboard, and with its help get all the information from the device. The cost of work is from 2,500 rubles.

From the listed devices you can contact our partner - the ModMac service center. Do not forget that the site is valid for all readers 10% discount for all types of repairs.