Enter bios from windows 10. Bios settings - Detailed instructions in pictures

Home / Device installation

BIOS (Basic Input and Output System) is necessary for the computer to operate in principle. This is software that is “sewn” into the motherboard chips. Often we want to know how to enter the BIOS on Windows 10.

Before version 8, entry was made with a simple finger movement. As soon as the computer turned on, the F2 or DEL buttons were pressed and you entered the menu. In 10, they introduced a launch mode on high speed, and this step became simply unnoticeable. Try pressing DEL while loading. This works on most computers. If it doesn’t work, then proceed as indicated below.

How to run BIOS on Windows 10

First, let's look at an option that works on any computer or laptop. If your PC boots, then you can do the following:

1.Select options.

2. Go to the update and security section.

3. Click Reboot Now.

4. The computer will begin to restart. But it will be performed in a special mode. First you will see a window for selecting actions. Select troubleshooting.

5. Then go to advanced options.

6. You need to go to UEFI, that’s what the bios management program is called.

7. Then click the "Restart" button.

After rebooting, you will be able to get into the BIOS on Windows 10.

How to enter Windows 10 BIOS when the system does not boot

Here you will need an installation disk or recovery disk. Once you insert it, the reboot will begin. You will see a screen with an “Install” button and a “System Restore” link at the bottom.

After you click on it, you will be taken to the same menu. Proceed as described above.

How to enter BIOS on Windows 10 if DEL does not work

In this case, disable Quick Startup mode.

1. Click the magnifying glass icon next to the main menu button and start typing “Control Panel”. Options will appear at the top. Select controls.

3. You need to go to the section “Action of the power button”

4. Uncheck the box next to the “Enable quick start».

After completing these steps, click the “Save Changes” button at the bottom and reboot. Press DEL as soon as the computer turns on. You must go to Bios.

How to enter bios on Windows 10 on a laptop

Laptops may have a separate button to log into UEFI. If you want to figure out how to enter the BIOS on Windows 10 on a laptop, you need to do the following:

Find out the model or number of the device.
Go to the official website of the manufacturer.
Find documentation for your laptop.

If you have documents saved on your computer, look through them.

We will list how to login to bios windows 10 for different brands:

Lenovo. Laptops of this brand have a separate button to enter the menu. You can find it near the power button or next to the power connector, depending on the model. There is a curved arrow drawn on it.
On asus laptop You need to press F2 when loading. The trick is that when turned on, this button does not work if the mode is turned on fast loading. But when you reboot, you will be able to enter the Bios.
On Acer, most models use the F2 button. If you can't log in, try Ctrl+Alt+Esc.
In HP laptop models, the login button has traditionally been F10.

How to open bios on Windows 10 on a tablet

If you are the owner of a tablet with installed Windows 10, then go as described in the second paragraph - through recovery.

There is no base system as such on Android. You can go to engineering menu by pressing a combination of the power and sound control buttons. For each brand this will be a different combination. We advise you to find documentation on the manufacturer’s official website and read about ways to enter Bios.

Bios settings for Windows 10

After we figured out how to enable bios on Windows 10, let's understand a little about its options regarding Windows 10.

In fact, the base system is independent of the operating system. She is more responsible for the operation of the hardware. You will need to get into Boot menu if you install and restore Windows 10 from a flash drive or disk. The boot device needs to be changed.

Go to Bios using one of the above methods.
Then select the Boot section.

3. Select the first device boot option #1 and press Enter on it.

4. Set the desired device to boot and exit with saving (Exit and Save).

If we talk about the Bios menu, we list the purpose of the main items:

Main menu. Displays basic PC parameters, including BIOS version.
Advanced. Configuring processor, peripherals, video, PCI, etc.
Overclocking. Allows you to set values for overclocking the processor.
M-flash. Function for updating or backing up BIOS (available on MSI boards).
Security. Setting a password for logging into the system.
Boot. Used to install boot devices.

Depending on the BIOS version and motherboard and processor models, the menu may differ.

If you are planning to update the OS to version 10, then read about . If your PC is loading slowly, you need information about how the 0 .

First, let's look at what a BIOS is. (read further “BIOS”). BIOS is the basic input/output system on a computer and is responsible for starting the operating system. You can enter the BIOS on both new and earlier versions of Windows (read further “Windows”, “Windows”).

Let me remind you in advance that new laptops and PCs have UEFI, while on older models you can find the usual and beloved Legasy BIOS.

Differences between UEFI BIOS and traditional BIOS

Legasy - reads all information from the sector where the main one is located boot record, popularly referred to as MBR, and after reading it selects the device on which the OS is located and gives the command to turn on the system. The command is processed and if everything is fine and there are no errors, the system is turned on. Legasy runs on a 16-bit system, thereby limiting the amount of information that can be read from system memory(ROM). This influenced the emergence of UEFI.
UEFI (interface) - essentially performs the same task, but does it a little differently and faster. It stores all information in special file, which is located on the hard drive (hard drive) in a special section. This file is called ESP (EFI System Partition).

The difference is clearly shown below:

On the left is the UEFI BIOS, on the right is the Legasy BIOS

Entering BIOS settings

Let's return to the essence of the matter and finally solve the question of how to enter bios, for example, in order to . So, in order to enter the BIOS on Windows 10, we need to launch this very system. After logging in, we need to click on the notification icon, which is shown in the picture. Next, go to “Settings” and click “Update and Security”. Then select “Recovery”, click on “Special boot options” and select “Restart now”.

After reboot, select the items below:

"Diagnostics";
« Additional options»;
"UEFI Firmware Settings";

If you have difficulties with the first method of entering the BIOS on Windows 10, do not worry, there is another way to enter the BIOS. Follow the instructions below:

On the login/logout screen, click on the “Power” button;
Hold down the “Shift” key and without releasing it, click on “Reboot”;

If you need to exit the BIOS, press Ctrl+F10, your settings will be saved and you will exit it.

That's all, the question of how to enter bios on Windows 10 can be considered solved. We looked at what a BIOS is, what it is like, how to enter the BIOS on Windows, what the BIOS looks like old version and what the new one looks like. I hope this article was useful to you.

Below I will leave a video that clearly shows how to open bios on Windows 10. There are a dozen or more such videos on the Internet, but nevertheless, the essence of the issue is revealed here. Good luck!

BIOS– a set of utilities that are installed on the motherboard, which make it possible to turn on the device to install the OS. With its help it happens Windows boot 10, selection of storage medium, the range of thermal sensors is indicated, various parameters are configured. If the system stops booting, errors occur and recovery cannot be performed using the standard method, you can do so through the BIOS.

How to restore Windows 10 via BIOS.

But this method can only be used if there is installation disk or flash drives with a distribution kit of a licensed operating system with the version and bit depth that you have installed, without external storage this option is not possible.

First of all, you need to start by setting the BIOS to read the disk immediately when you start the computer.

If preparation automatic recovery does not make it possible to restart the computer normally, you need to do it forcibly by holding down the shutdown buttons for 10-15 seconds, as soon as the system starts to boot, you need to press one of the keys: F1, F4, F3, Delete, F8 (tell exactly which one you need to press (not possible, as it depends on the motherboard model of your device).

You can look in the instructions for your computer or on the manufacturer’s website to find out which key you need to log in. On most PCs, the “Delete” button is used; on laptops, the key combination “ctrl+alt+esc” can be used.
After the BIOS starts, go to the Boot section.

You need to find the “1st boot device” parameter, which can be located in the “ Boot Device Configuration", "Advanced Features", "Boot", "Boot Sequence. There you will need to set the parameter for the CDROM or PXE UND I disk to boot from a flash drive:

Press “F10” to save the result, insert the disk into the drive or connect the flash drive on which the distribution is stored, then reboot the device.

After the computer boots, the initial system installation menu will appear, where you will need to click on the “System Restore” button.

The “Select actions” menu will open; select “Diagnostics”.

Then go to the “Advanced options” item.

Next, click on “System Restore”.

After clicking, a window will open asking you to select a restore point.

Startup Repair scans your computer for errors and fixes them when they are found. You can try to run the utility, but in most cases, after searching, it usually displays a message that the computer could not be restored.

If you had a rollback provided and your Windows was successfully restored after the above steps, then after this you will need to go into the BIOS and return the boot priority back hard drive to first place.

— How to restore Windows 10 via command line.
If control point you didn't create, restoration Windows systems 10 can be tried via the command line. For this you will also need a boot disk or flash drive with operating system Windows, which is installed on the computer.

In the "Advanced Options" section, select "Command Line"

In the window that opens, type “fixboot”.

Then the action must be confirmed by pressing the “Y” key.
After recovery Windows boot loader 10, the system needs to be checked for damaged system files.

Options for solving problems with damaged system files

Damaged boot sector operating system.
In the command line you need to enter “fixboot”, press “Enter”, then enter “fixmbr”, press “Enter”. After this, the windows boot sector will be restored. The computer can be restarted normally.
The boot.ini file has disappeared.
In the line you need to type “bootcfg /rebuild”, then press “Enter”. Confirm all possible system questions by pressing the “Y” and “Enter” keys.
The config in the system32 folder is damaged.
You need to insert the disk with your OS version into the drive, enter “cd repair copy SYSTEM C:\windows\system32\config” in the command line, and then press “Enter”.
The files “ntldr” or “ntdetect.com” are missing, the system displays the message: “NTLDR is missing when loading Windows.”
Enter “copy X:\i386\ntldr C:\” in the command line, press “Enter” (Where X is the letter of your drive, and C is the letter of your system disk, on which your OS is installed).

Restoring the system via the command line while the computer is on.

If you do not want to restart your computer, you can restore the system via the command line from Windows. To do this, you will need to insert the disc into the DVD-ROM while the PC is loaded. Then launch the command line by pressing the hotkey combination “Win + R” and in the search bar of the “Run” window, enter “sfc /scannow” and click “OK”. After which the broken system distributions will be copied from boot disk automatically. System recovery and rollback are quite quick and trouble-free.

When switching to Windows 10, users encounter some difficulties, because some aspects are unusual or completely unfamiliar to them. For example, many are concerned about the question of how to get into UEFI or, as it is called in the old fashioned way, BIOS. The fact is that UEFI is software motherboards, which replaced the BIOS, but out of habit everyone continues to call it that.

In principle, the name is not so important, the main thing is to get a solution to this issue. So, if you are interested in how to open the BIOS on Windows 10, I invite you to read this material!

Standard method

First of all, I will tell you about a method that many users are familiar with. Its essence is to press a button (for most PCs) or (for laptops) while turning on the computer, but before its system boots. Usually at the very bottom of the screen there is a hint about which button to press, something like “Press (button name) to enter setup.”

It would seem like nothing complicated, but on Windows 10 the computer boots up in seconds, so it’s not always possible to figure out which key should be pressed. However, this problem is easily solved:

That's all, now you can use the standard method of entering the BIOS. It will definitely come in handy when you encounter .

Logging into UEFI on Windows 10

However, there is a lesser-known way to get into UEFI, namely:

And finally, one more method of logging into the BIOS, which is suitable if the user, for some reason, is unable to get into Windows 10, but the login screen works. The idea is to press the computer's power key on the login screen, then press and hold , and then select "Restart". This will take you to special OS boot options. Well, the next steps are described by me above.

10th Windows version along with numerous changes, it brought difficulties with the transition to the BIOS: during startup, by default, the stage with the login prompt is skipped. This was done to quickly prepare the computer for work. Let's figure out how to enter the BIOS on Windows 10.

How to enter BIOS on Windows 10: boot settings

There is a standard mechanism that allows you to still go to the BIOS at the initial stage of startup, but by default it is not active. Instead, a mechanism is used quick start, similar to hibernation: the OS goes into deep sleep, from which you can quickly return to work. However, you can configure the system so that this does not happen the next time you start it.

Via system parameters

The first way to open the BIOS is to configure boot features directly from a running Windows 10. To do this, call up the menu by right-clicking on the taskbar and select the lowest item.

An alternative option for accessing settings is available through notifications. You need to click on the notification icon on the taskbar and in the window that appears, select the “All settings” button.

A window will appear where you can configure Windows 10. It requires a section called “Update and Security.”

And already in it the “Recovery” subsection is selected.

On the page that opens, in the special download subsection, click the “Restart now” button.

After this, the device will restart.

Via Start

Another option for turning on the BIOS is to go to Start and use the shutdown submenu located there.

Through the login screen

There is another way to launch the BIOS - directly from the start screen by entering a password. It will come in handy if you cannot log into Windows 10 for one reason or another.

At the bottom right you need to click on the power icon, hold down Shift and click on reboot.

Next steps

After completing any of the above options, the PC will reboot and you will be asked to select actions. You should go to the troubleshooting point.

The diagnostics section will be displayed, where you will need to go to Advanced Settings.

Now you can click “Restart”.

After this, the device will restart, while the mode quick start(analogous to hibernation) will not be used. Therefore, you can press F2 or another appropriate key to enter the BIOS.

Please note: A different combination may be used on a laptop. Therefore, carefully follow the messages before turning on the OS; they indicate which button should be pressed to work through the BIOS.

On modern computers UEFI is more often used - it is similar to BIOS, but it makes full use of the capabilities of the PC (for example, you can use a mouse in it, and the graphic design is richer). If Windows 10 is installed on a computer with UEFI, the corresponding item will be displayed.

This is what you need to select to switch to UEFI.

Disabling accelerated mode

Changing the next reboot is suitable for one-time use. But what if you need to do this several times on your computer - for example, to test hardware or connect new devices? In this case, it is better to disable fast launch so that the prompt to press F2 (or Del, or another key) is always shown.

To do this, you first need to go to the control panel. This can be done through context menu, which is called by right-clicking on Start.

A list of settings will appear. In it you need to find a section with power supply. Next you need to open the sub-item to configure the power buttons.

Most likely, the checkbox will be unavailable. In this case, you need to click on the special link just above so that Windows 10 allows you to adjust the inaccessible values.

Then you need to uncheck the box to put Windows 10 into normal start mode.

When acceleration is disabled, after each turn off/on the device you can use the keys to go to the BIOS.